Sign in to follow this  
Link

Caravelle 1351.50

Recommended Posts

Anyone recognize this movement? Or what else it might be called? I’m trying to find a tech sheet on it.

 

Also check out the “West Germany” inscription!

 

baa5a66a6993a237bdecefa9130a3fda.jpg

 

d7a8d9139fd532d239b59c8316db8d0a.jpg

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Moved as is not a specific repair question.

BTW in most cases a technical sheet isn't strictly necessary to service a mov.t.

Share this post


Link to post
Share on other sites

Thanks for the link to the PUW 1660

My apologies I posted this in the wrong area, I'm an extreme beginner so any exploded diagram will help me out.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Since this is a pretty complex ana-digi movement I would only clean it if it is dirty on the inside (which is usually unlikely). For the most part you're only going to have to clean the inner keyless works where all the metallic non-electric parts are (the ones that turn the hands) and lubricate them. Anything that is electrical just use an air blowing tool and lightly clean them (especially the contacts) with something soft, maybe a soft brush. You have to take it all apart to reach the area where the gears/wheels are. You'd need some special grease and oil for them. Usually they use quartz watch oil. Can't remember what I used specifically.
    • I don't have experience but I have a friend who often repair automatic watches. I will share with him your info and video and try something.

      Is white spirit ok for cleaning?
      Any suggestions for the lube?




      Inviato dal mio G3121 utilizzando Tapatalk

    • Welcome to the forum! What you're playing with is basically the most sensitive part of the watch.... I think you're better off starting over from scratch, buying cheap movements to practice on, all the tools you needs, and then, try to fix the mess. We're talking at least a few months worth of practice here. Or you can take it to a pro who will fix it for you, but we're probably talking many 100s of dollars at this point... (a proper cleaning of a working watch would have cost a couple 100s maybe) It is a nice watch, it's a shame it got all mangled up. If you do decide to take on this hobby, watch all the videos, ask questions, take it slow. In a few months, you'll be very proud to have a working watch again (just make sure you break a few cheap ones first).
    • I serviced a watch like yours a few months ago. Mine had somewhat similar issues with the seconds hand. I just cleaned the movement, lubricated it and then assembled it back together. You'll find a few videos made by someone on how to take that movement apart on youtube but they're not very good if you don't have any experience. If you don't have experience with working on watches and if you don't have the right tools I suggest you take it to a watchmaker or leave it alone until you get more experience (if you're planning on doing this as a hobby or something).  
    • Servicing by doing what? Can you explain a bit more about procedure s for servicing it? Or if someone has a link or something that could guide me through this would be a great help

      Inviato dal mio G3121 utilizzando Tapatalk