Jump to content

as2063 MainSpring Barrel

adiorio110

By adiorio110
in Watch Repairs Help & Advice

 Share

Recommended Posts

Deggsie WRT Addict

Deggsie

Posted
Posted
What am i doing wrong ..I can not get the mainspring barrel open. As2063

They are interference fit, assembled together with a press. This is very similar to the seiko mainspring barrel. Unless anyone knows how, my assumption has been that the component is sealed for life and cannot be easily served. Regards. Deggsie


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
adiorio110 WRT Addict

adiorio110

Posted
  • Author
Posted

They are interference fit, assembled together with a press. This is very similar to the seiko mainspring barrel. Unless anyone knows how, my assumption has been that the component is sealed for life and cannot be easily served. Regards. Deggsie


Sent from my iPhone using Tapatalk
That kind of sucks... spring is not grabbing

Sent from my SM-G955U1 using Tapatalk

Link to comment
Share on other sites
adiorio110 WRT Addict

adiorio110

Posted
  • Author
Posted
You should be able to get this open. Check out ...
 ... for some helpful advice. Good luck!
Damn ..wish I see n this post before I went nuclear...I tried to get it off as mark did in his as1900 video.. rounded the bottom a little, but was able to straighten it out... read your post and it worked beautifully...

Thanks
Tony

Sent from my SM-G955U1 using Tapatalk

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

You can open that type of barrel using a case knife. You are meant to replace the whole thing, but due to stocks, dwindling this is the only option. Seiko barrels are the same. Back in the 70's & 80's Seiko suggest you replace the barrel with a completely new unit every (I think) 5 or 7 years.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HectorLooi
      Without Our Forum

      By HectorLooi · Posted

      Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
×
×
  • Create New...