Help needed on ESA 959001

[Watchtime]

Hi guys, I got my hands on this broken B&M watch with a ESA 959001 mvt. on a garagesale. As you can see one of the hands is broken and the watch is very dirty. I wonder if someone can help me out with the size of the hands needed for this watch. I tried to release the stem by gently pushing the dimple next to the 2 screws but it doesn't seem to be the correct one.

[Watchtime]

Found the stemrelease...it was the little dimple on the left, part of a"spring". The stem seems to be stuck when pulling it through the hole in the case, it only comes out a bit.

[Ishima]

some information can be found here, inlcuding hand sizes http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&&2uswk&ETA-ESA_959_001
I did try to find you a technical/service sheet but to no avail, but my search wasn't exhaustive. 

 

Edited February 21, 2018 by Ishima

[Watchtime]

thanks Ish, 1.00x0.50 it must be

[clockboy]

1 hour ago, Watchtime said:

thanks Ish, 1.00x0.50 it must be

That should be the size required. Hopefully the movement is OK because Baume Mercier (yours BM9000) movements are not sold to the general trade. 

[Watchtime]

thanks CB, the movement is ok as the hourhand is keeping time after I put in a new battery. As I want to clean the case and put on new hands,  I am only trying to get the stem through the stemhole.

Any help is hihgly appreciated