Jump to content

How to disassemble this balance shock ?


Lc130

Recommended Posts

Folks

I'm learning the basics on a Waltham wrist watch. The goal is to disassemble, clean, oil and reassemble and hope it still works. I've cleaned the balance in the ultrasonic while attached to the plate. Now I suspect that I should remove, clean and oil the shocks. Two questions: how do I remove the cap jewels in the shock mechanism? Also, am I correct in assuming that the shock on the top of the balance is best serviced while attached to the movement?

Thank you!

Charlie

IMG_2681 (1).JPG

Link to comment
Share on other sites



×
×
  • Create New...