Vintage Tag Heuer Formula 1

[mdhc500]

Hello, I would like to request some direction. I have a vintage Tag Heuer Formula 1 that I am need to replace the movement on. I have the stem out, movement out, hands off, but I need a nudge in the right direction on how to remove the dial? I think it is a Harley Ronda Movement HQ705, its marked with Tag Heuer 3.88 . Can anyone help?

 

Thanks!

[khunter]

From what I can tell from images on google it appears to be a press fit, I don't see any eccentric screws or clips. If still in doubt upload some pictures so we can take a look. 

[Chopin]

It's definitely a press fit. Sometimes I've encountered a bit of glue between the plastic spacer thing and the dial itself.

I usually just try to find a space where I can slowly and safely insert the screw driver tip and slowly pry it out. I do this in multiple spots along the movement/dial until it comes out evenly so as not to break the dial feet.

[mdhc500]

Press fit it was. I carefully used an Exacto Knife, and it popped off. Thanks everyone!