Jump to content

ETA 955.114, quartz movements in general?

MrRoundel

By MrRoundel
in Watch Repairs Help & Advice

 Share

Recommended Posts

MrRoundel Super WRT Addict

MrRoundel

Posted
  • Author
Posted (edited)

I ended up ordering two of these (955.114) circuit boards from a seller on EBay.  After installing, the watch still didn't run. So I got out my meter and checked the coil for continuity. It had it. Then I looked for a pulse. There was none. I checked the battery while it was in the circuit and it read low. I put a different battery in and away she went. Sometimes it's the simple stuff. I was out of 371 batteries so I used one that was on my bench and checked out, outside the watch. I put a 373 in there until my 371's come in. It was just a bit shallower than the 371.

If anyone wants the link to the seller, PM me, and I'll provide it. I believe that have a good number of them. Cheers.

 

Edited by MrRoundel
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • nickelsilver
      What are these Seitz B-Jewels?

      By nickelsilver · Posted

      It's pronounced "bombay" like the city.  French for bomb is, 😄, bombe, pronounced the same as in English. Bombé, bombe.
    • VanDan
      Bench mat

      By VanDan · Posted

      That's a really good idea! I have a 3d printer, I think I'll design something that I can clip on to the edge of my desk to do the same. Thanks for the idea. 
    • RichardHarris123
      What are these Seitz B-Jewels?

      By RichardHarris123 · Posted

      I looked up bombè, domed in French.  It's pronunciation is bomb, does a bomb (explosive device) get It's name from bombè? I know we're going off subject but it's interesting. 
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Okay, I checked with the fine folks at the McCaw Company, and they agree it's the correct crystal, and they have one in stock, so with that sorted time to get onto assembly. Starting by getting the spring into the barrel, which was a bit harrowing. It took me several tries to get it hooked onto my worn old winder arbor, but I did find a new use for the micrometer stand I just purchased. Carefully dabbed some Kluber P125 braking grease to the left of the divots around the barrel, and a little HP1300 on the floor of the barrel before popping it in--in case you haven't seen it, this is a great illustration I found somewhere on this site. You're not the boss of me, Bulova.   2172_Bulova 11AOAC 11AOACD 11AOACB.pdf Bulova_11 AOAC, D, B(1).pdf I got the train back in and it didn't seem as free as I'd like. Looks like the driving wheel with cannon pinion has zero end shake. That could explain the low amplitutde I started with. Now if you were me, would you push on the plate jewel or the bridge jewel? I've attached some extra pictures in case anyone sees something else I'm doing wrong here.
    • Razz
      What is it about this watch that speaks to me?

      By Razz · Posted

      I have quite a few watch brands from all over the world. For some reason this Timex electric from 1979 is capturing my attention this week. I am not a particularly fond of battery operated watches or Timex, but this one is different for some reason. Post your watch in your collection that seems to draw you in more now than before...
×
×
  • Create New...