Jump to content

Fake Military Watches?


Recommended Posts

On 8/31/2019 at 8:47 PM, HSL said:

If you look in the book "German Military Timepieces of World War II Volume 3 German Army/Waffen-SS" by Ulric of England and
on Page 33 you can see how a genuine should look like, Helvetia made a similar watch before like in the early 30's and after the war so they became popular to sell from countries like Ukraine where they just popped in a Helvetia caliber 82A or similar in a fake case.

Germans are known for their efficiency and during a raging war they wouldn´t care to engrave the movement with the amount of jewels and so on the barrels and thats why the most confirmed genuine are just blank inside with just 82A stamped on the side; while one from the 30's would have some text and even some serial numbers on the train bridge. All the casebacks in the book has the 3190 engraved in them and so do the fakes, but the most genuine has a CB mark stamped on the inside.

The things to be aware of here is the serial number on the trainbridge, looks like a 6-9 number serial, what you would expect on a pre war (81-24) movement.
The movement mostly provided during the WW2 was the 82A-24. On this specimen you also can see the text General Watch Co , Helvetia's parent company on the movement which I think never occures on the real deal.

The D 15004 H looks a bit familiar to a case I bought from the bay in 2017 just for reseach purposes, think the serial was D 15009 H or something like that.
But who knows progress in identifying these gems might have progressed but I wold want to see the inside of the back and a better closeup of the movement before buying it.

Hello all,

I know this is an old thread but just in case someone stumbles across it while trying to authenticate a DH Helvetia watch I thought I'd update it quickly.

I have studies Helvetia DH watches extensively and I agree that the movement is an earlier one, probably from the early 1930s, as you say the DH movements are normally plain, often only marked Helvetia.

The dial, hands, case and numbering are all correct however, I have one exactly the same, there were a few variations of Helvetia DH watches.

Have a look at my page here for more info:

https://www.helvetiahistory.co.uk/german-military-dh-watches

Thanks.

Carl

 

Link to comment
Share on other sites

On 9/1/2019 at 9:19 AM, HSL said:

Just as a fun fact in the same theme, there was a bunch of cases roaming around for a while. I'm sure they are contemorary WW2 stuff but probably never used. I've seen these NOS cases with Helvetia 800C movements in them.
I guess they seem to be more accepted these days but is it a genuine WW2 watch? Can one just pop in a movement in them and say they just made a restauration, after all the cases doesn't meet any specs setup as a military watch. Maybe they needed a coctail watch for nicer receptions?

 

IMG_20190901_095206.thumb.jpg.0529075531ea7f8099b3c53cd38c4193.jpg 

IMG_20190901_095143.thumb.jpg.9aa953b16a5decf50f0e7c3d7ef8e576.jpg

IMG_20190901_095234.thumb.jpg.a81a6e2a92d89b46562507280f7d2fdd.jpg

I also have a page on Helvetia DIH watches and these NOS cases:

https://www.helvetiahistory.co.uk/german-military-dih-watches

Thanks. Carl.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • If frank says these bombè jewels are for balances and similar pivots then they are used cupped side facing the pivot and then capped i assume. In Nicklesilver's reply i guess that cup can also be reversed and used as an oil reservoir leaving the shoulder riding on a less frictioned domed surface. 🤷‍♂️ Hence the use of them on wheels closer to the escapement that have less torque requiring efforts to reduce friction and are also uncapped.
    • Looks that way, if it had any amount of significant jewel count it would say so on the dial.    Looks that way, if it had any amount of significant jewel count it would say so on the dial.  Same answer as Mike regarding the dial, its often just a slapped on name of a retailer but i thought you were way above this understanding Pete ?
    • Light naptha is what you need to be looking for. The carbon to hydrogen ratio is high with heavy naptha, it doesn't evaporate as well as light naptha and is prone to leaving more residue. Try tom's suggestion of the mirror test.
    • Its a big item Michael and a lot that could go wrong with the process of getting it to its new location. I once helped install one of these units into a conservatory that i had built. It was big and bloody heavy and took six of us to get it in safely. If you have sliding doors and you need to remove the whole frame then that may or may not go well. But i would advise getting a professional in if you have little knowledge on the installation of them. The glazing of the doors could well be 6mm laminated glass which again will be heavy very heavy if the glazing units are big. The glass would also need to be set up and packed correctly to open the doors properly more so if they are unframed and the sliders are upvc. Seems a shame but if no one is biting and that may be due to having no warranty i guess the only takers might be someone that installs them for a living and knows how to repair. If its fibreglass just be careful, i sometimes have to cut fibreglass baths out and they are nasty to work with . Thick gloves are definitely recommended,  not fun picking out fibreglass spells two days later that have started to go septic. Good luck with it all matey.
    • I don’t know anything about this product, however assuming you have it if you put a drop on a mirror or piece of glass lying flat on a table and leave it to evaporate if it leaves any sort of residue it is not really suitable for watch part cleaning.   Tom
×
×
  • Create New...