Jump to content

Parts for my Gramps' Pocket Ben


Recommended Posts

So my Nana gave me my Gramps' Pocket Ben he's had as a work watch, but the chain loop on the top is missing. I took it to my local watch repair and they said that you can't replace that loop (I think it's called a bow?) on any watch because "it won't have enough tension".
Is this true? Because I'm pretty sure I've seen replacement ones on eBay and Amazon, but I don't want to order any if I can't actually put it on.

Link to comment
Share on other sites

The bow is replaceable, and I believe I just saw some pocket ben bows for sale actually. You need bow opening and closing pliers to do it right, but it can be done with care with standard needle nose pliers. Generally, squeeze the bow a little tighter than it needs to be when fitted, then use the needle nose to spread it just far enough to fit into the stem holes, then release. It should spring back slightly and hold snugly in the stem. Sounds like your jeweler just didn't want the hassle, or your business. 

Link to comment
Share on other sites

I haven't seen a Pocket Ben in person but...

On the 1800's and early 1900's pocket watches with plain circular or oval shaped bows (Pocket Ben styles 1 - 2a), one uses bow pliers to bend and adjust tension on the bow.

I am assuming the material used in the Pocket Ben is similar to that used in the various cases I have and

They have little nubs on the end that fit into a sort of socket on the stem tube and are held in by tension.

If it is style 3 and up, then I defer to others. I would think a parts watch would be the way to go if there is a way to replace that newer style bow.

Old style bow assortments come up for auction often. I have some larger spares if you need.

Ref: https://clockhistory.com/0/westclox/series/series-17-1.html



Sent from my Pixel 2 XL using Tapatalk

  • Like 1
Link to comment
Share on other sites

Thank you for your replies, everyone! I went and got a second opinion at a watch repair in another city, since this guy was the only one here, and they said no problem, turns out a friend of his out west has a few bows for my watch, which he is going to ship to my address, and I just have to cover the shipping cost. It's a style 6 pocket Ben from the '60s.

Right now it's got an old jump loop and cheap chain that Gramps rigged on after the bow came off. But I'd rather get the actual bow that fits it, because I'm worried the bent-into-shape jump loop's going to let go.

 

 

20180129_154312~2.jpg

Link to comment
Share on other sites



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • nevenbekriev- You nailed it with your description of me and my reaction when the clock started ticking again. I am a newbie.  I love the sound and idea of mechanical clocks but the idea of owning one and trying to keep them running has never appealed to me. My wife bought this one and an antique German wall clock.  When I looked into having someone repair them for me, the universal response was "it's really expensive to work on them, you should just replace the movement". So, I had nothing to lose, I started researching them and opened them up. The wife is happy because she hears the sound of the clocks again. But I have gone down the "accuracy" rabbit hole. In the vertical position, the balance wheel was not floating. It was sitting on the bottom of the frame. I adjusted the lower spring collet and got it floating. It easily passed the 270 degree 3 to 5 minute oscillation test. It took 8 minutes for the wheel to completely stop moving.  I put it the unit back in the movement and checked the safety pin. It does not touch the safety roller anywhere in +/-270 degrees rotation from neutral position. But the amplitude of the rotation with the spring fully wound is weak based on what you are saying. It rotates +/-90 degrees from the neutral position.  No, I did not take the movement completely apart.  That seemed way outside my skill set at the time. There is a reason I became an electrical engineer and not a mechanical engineer. I am much more comfortable with moving electrons than tiny moving metal parts. Will I do it in the long run? Anything can happen. I don't seem to be able to let it go.
    • Isn't that the same guy who told Zelenskyy to escalate the war with Russia/Putin when they already had a peace deal? 2 years later and we have half a million young Ukranian boys dead. He doesn't seem very clever...
    • Thanks guys.  quick question. For automatic movement, particularly this one. can I power down the main spring by pushing this rachet down?  i've gotten pretty used to SW210 and powering down a manual movement. But so far i've only been waiting for the auto movement to run out of juice before opening the case.     
    • @Murks the problem you have mate is most watch cases out there to buy are for Seiko NH3X, ETA 2824 and maybe Myota 8XXX movements, oh also the big ETA 6978/9 movements which the dials start around 28.5mm. You might find one on a Google search but I suspect your main chance will be buying cheap quartz ladies watches and hopefully find one of the right size and condition that is acceptable. 😞   Tom
    • The anchor pin should be perpendicular when the anchor is sat on a flat surface and if you post a close up picture of the backplate I will be able to tell you the correct torsion spring , running fast or slow is usually wrong Torsion spring. Here is a video from my YouTube channel showing how I set the beat  
×
×
  • Create New...