Jump to content

Grandfather Clock mechanism holder


Folkvisor

Recommended Posts

This is what I used. I had many of these and there cheap to make.

A piece of wood with a hole drilled near the top, hang it on a large screw that has been screwed into the wall and two L shaped brackets screwed to the wood. Movement fitted to the seat board. Seat board rests across both L shaped brackets, make sure the brackets are big enough so the pendulum can be fitted and is free to swing. You need to make sure the wood does not move when winding the single weight. I used to drive a nail into the wall to stop it moving after making sure it was level.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...