Jump to content

Difficulty removing watch movement


nriddell

Recommended Posts

Hi - Although I've attempted to play with and repair a lot of watch movements, I'm having difficultly with this Avia. Challenge I've had is I can't for the life of me work out how to get the movement out of the case. The glass is off and I've tried to take it out the front but no luck as it seems the dial is just a little larger than the front opening. Can't take it out the back because of the spacer that is build into the case. Case screws and watch winder have been removed.

Can anyone let me know what I am doing wrong?

Thanks in advance.

Capture1.JPG

Capture2.JPG

Edited by nriddell
Link to comment
Share on other sites

Either the bezel at the front comes off to let the movement drop out of the front or there it should all push out of the back.

Difficult to tell from photo but are you sure that's not just a movement support ring at the back that's seized in looking at condition of the rest of the case and it all just push's from the fron out of the back?

Edited by Tiktok
Link to comment
Share on other sites



×
×
  • Create New...