Jump to content

Royal Geographical Society Ronda 13 jewels


Recommended Posts

Hey, guys!

This is my first post here. :)

So, I'm a watch enthusiast and I was offered my first repairing kit a few days ago. I've had a watch for Four years (Bought it cheap in anexo auction) and I've decided to open it up. The seller told me it might be the movement.

Well, I had no trouble on opening it up with the help of the tutorials, but I cant go further because i dont know the next step. :/

I'll leave some pics here. I'll buy a beer to whomever helps me with this one eheh

Thanks you!

https://drive.google.com/file/d/1LCmsM2xWpsXqfnSLVJN0om0p3z50EoJX/view?usp=sharing

 

 

Link to comment
Share on other sites

You failed to mention this... Is your watch non-functional ?

Perhaps a stupid question but have you had a battery installed in it to check whether it works ? Only asking because in the photo provided the movement doesn't have a battery.

If you've tried a battery and it didn't work you should know that, sometimes, some movements can be start by short starting the movement. (look it up online to see a rough idea about it).

There's a possibility that the movement just needs servicing (cleaning and oiling of the internal parts) or it might need a certain faulty component replaced. Or you can just replace the movement completely.

Link to comment
Share on other sites

1 hour ago, Chopin said:

You failed to mention this... Is your watch non-functional ?

Perhaps a stupid question but have you had a battery installed in it to check whether it works ? Only asking because in the photo provided the movement doesn't have a battery.

If you've tried a battery and it didn't work you should know that, sometimes, some movements can be start by short starting the movement. (look it up online to see a rough idea about it).

There's a possibility that the movement just needs servicing (cleaning and oiling of the internal parts) or it might need a certain faulty component replaced. Or you can just replace the movement completely.

Hey, Chopin!

Thanks for the answer. The watch was not working, I bought it like this. It had a battery, but I took it out yesterday. It had some kind of white dust, it may have spilled the battery content. 

Any video you recommend for me to learn how to clean a watch?

Thanks :)

Link to comment
Share on other sites

You're going to need the right tools and quite a bit of experience else you're guaranteed to wreck it.

For starters I would advise you to find the exact model of the movement. Should be Ronda and some numbers. It's written on the movement itself, inside the watch.

After you found the movement, look up what type of battery it needs and order one online. (or take it to a watchmaker and he can do that for you)

See if this works or not. I believe the white stuff just means that the watch sat like this for a long period of time. I think that when the battery leaks there would be dark substance around and maybe even melted plastic or metal...

Does the movement look clean ? You could lightly clean the battery contacts in case there's debris on them.

Link to comment
Share on other sites

5 minutes ago, Chopin said:

You're going to need the right tools and quite a bit of experience else you're guaranteed to wreck it.

For starters I would advise you to find the exact model of the movement. Should be Ronda and some numbers. It's written on the movement itself, inside the watch.

After you found the movement, look up what type of battery it needs and order one online. (or take it to a watchmaker and he can do that for you)

See if this works or not. I believe the white stuff just means that the watch sat like this for a long period of time. I think that when the battery leaks there would be dark substance around and maybe even melted plastic or metal...

Does the movement look clean ? You could lightly clean the battery contacts in case there's debris on them.

The only reference to a model was Ronda 13 jewels 726 Swiss, but I can't find anything similar :/ Where do you buy your movements? Any specific website?

Link to comment
Share on other sites

2 hours ago, Chopin said:

This movement is discontinued apparently so it might be difficult (or expensive) to find a new one.

The battery that it uses is 384. Could try a new battery first as it doesn't mean that it's broken.

Is it possible to replace it by any other? 

Link to comment
Share on other sites

It's possible to replace it with certain other movements which may have been manufactured specifically for the role of replacing older movements but that is something that I can't look up.

You're going to have to make some digging up on Google for that...

Link to comment
Share on other sites

Just now, Chopin said:

It's possible to replace it with certain other movements which may have been manufactured specifically for the role of replacing older movements but that is something that I can't look up.

You're going to have to make some digging up on Google for that...

Of course, Chopin! Thanks for your help! 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Oh nice. I have a similar wedge style stump for my staking tool, so I'll give that a shot. Thanks!
    • Thank you all for the replies!  Very informative! True enough, the Gamsol took some time to evaporate and does leave a residue. So not all naphtha are created equal!  Need to find alternatives then. i was able to try Hexane recommended by Alex and it seems great.  I wonder what the cons are?
    • Yeah, I saw that in the tech sheet but I don't see how it can be adequately cleaned with the friction pinion still in place. I've accidentally pulled the arbor right out of the wheel once when I used a presto tool to try and remove it. Mark shows how he does it with the Platax tool. Those are a little too pricey for me so I got one of these from Aliexpress and I just push down on the arbor with the end of my brass tweezers. That usually gets it most of the way out and then I just grab the wheel with one hand the and the friction pinion with the other and gently rotate them until it pops off. Probably not the best way but it's seemed to work for me so far.    
    • Thanks, Jon Sounds like a plan. Obviously I'll have the face on so do you think gripping with the holder will create any problems, but I will check in the morning to see how feasible it is but I assume it only needs to be lightly held. As for holding the movement instead of the holder won't be possible in this scenario as one hand will be puling on the stem while the other pushes the spring down. That was my initial concern is how the hell can I do this with only one pair of hands. All the other times I've had to remove the stem hasn't been a problem, apart from the force required to release the stem from the setting lever, but now I need to fit the face and hands its sent me into panic mode. If it had the screw type release things would be a lot simpler but that's life 😀   Another thing I will need to consider is once the dial and hands are fitted and the movement is sitting in the case I will need to turn it over to put the case screws in. I saw a vid on Wristwatch revival where he lightly fitted the crystal and bezel so he could turn it over, is this the only option or is there another method?      
    • Hi Jon, do You think that relation spring torque - amplitude is linear? I would rather guess that the amplitude should be proportional to the square of the torque. I had once idea to check it, but still haven't.
×
×
  • Create New...