Jump to content

AS589

Folkvisor

By Folkvisor
in Watch Repairs Help & Advice

 Share

Recommended Posts

Folkvisor Super WRT Addict

Folkvisor

Posted
  • Author
Posted

I got the screw off but I have another problem totally new to me.

I had a strange chemical reaction in my ultrasound tub. A lot of brownish yellow material appeared from nowhere and has really made a mess of many of the parts.

I've never had this happen before. I'm not sure if has something to do with a chemical reaction between the cleaner I use and some of the metal parts on the AS589 or what. 

Has this happened to anyone else?

Very strange!

 

  • Like 1
Link to comment
Share on other sites
MrRoundel Super WRT Addict

MrRoundel

Posted
Posted

I have been using L&R cleaner and rinse in my US that was really made for use in mechanical cleaners. A few weeks ago, I had something similar happen, causing me to re-clean in my mechanical cleaner. I cleaned the SS pots with denatured alcohol and started with fresh cleaner and rinse. It has been fine since. I suspect that it was a reaction from a movement that had WD40 or something sprayed on it, or some other bad oil. I am not sure though. But it the symptoms were similar to what you describe.

What cleaner were you using?

 

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      In the meantime whilst awaiting a better plan, please drop me a quick hello on my email. 
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      I looked at it like this, I've built a lot of stuff in my time, building structures and furniture,those are my creations and they will still be here way way after I'm gone. Traditional watchmakers felt the need to pass their knowledge on, ideas that they created . I assume with them as it is with me, leaving their mark on the earth, a way of being remembered. This creation of Mark's has brought thousands of people together to pass their knowledge around,  ideas that will continue to be used for lifetimes. Ideas that should continue to be procured. If for whatever reason the forum ceased to exist, not quite like Ranfft's, that didn't disappear but much less usable. Then that is sad, such a massive loss of communication between good people and a wealth of knowledge lost. There should be something in place for when that happens which could be next week, next year or in 10 years. Might not be a topical subject for a lot of folk or boardering on controversy, i did say i talk about stuff other people dont. But if you dont talk about it and something happens then you've lost it and you ain't gonna fix it .
    • Waggy
      Without Our Forum

      By Waggy · Posted

      I've remained silent on this thread, and at the risk of upsetting everyone, the thing that worries me the most the the apparent absence of Mark. The moderators do a great job and the members also pitch in, and the site seems to run itself, but it is a concern for the future of this forum when the owner is absent for all intents and purposes. Like many of the comments above I would hate to log in one day and things be closed down as I rely on this site for ideas and knowledge and also cheer me up. maybe the Moderators could reach out to him, assuming he does not read this thread, and express our concerns and let us know the plans going forward? some kind of WRT ark
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      That was the exact reason for me starting this thread watchie. Still we haven't worked out how the regulars are going to hook up if it goes tits up. I honestly think something should be arranged to stay in contact, we all help each other so much. 
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      Yeah ive watched that a few times before,  i couldnt find my old school dividers to scribe it up 😅 Yep thats the guy i bought a roll from . Thanks Nicklesilver that answers that perfectly and more or less what i thought an experiment over time would prove . The jumper arm is quite thick along its length, i left it that way intentionally, i thought the original was probably very thin, i didnt see that it was already missing. Setting isn't particularly stiff as such just positive, i still need to take it out and polish where it mates with the stem release. 
×
×
  • Create New...