Jump to content

Oil shelf life


OldTimer

Recommended Posts

Assuming lubricants are a tool topic, how long is the shelf life of watch oils?  I am restarting my watch repair business after decades of dormancy and now wonder if I should start with new watch oils or if I can use what I already have. They were off in a dark corner but opened many years ago. Mostly what I work on are American pocket watches and other vintage pieces. What products should I use in the oil cups and where to purchase?

Link to comment
Share on other sites

All the recent synthetic Moebius oils I’ve purchased have a relative short shelf life; e.g, 2023 so if that’s anything to go on it would mean replacing your oils. I buy mine from a French seller on ebay as they are less than the main suppliers in the UK. Hope that helps. Happy New Year!!


Sent from my iPhone using Tapatalk

  • Like 1
Link to comment
Share on other sites

I’m not entirely convinced about manufacturer’s shelf life dates being used to decide whether or not an oil is still good to use or not. 
 

I do wonder whether the expiry dates on the Moebius oils are biased towards profits and not a true reflection of their effectiveness after that date. I’d imagine they may still be good for double the life stated, but that would be a guess. I bought these in Nov 2017. 8fc01517e333a4dafb452839a022f195.jpg


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Moebius 8000, natural oil. On eBay 1ml sells for about £12 including postage ...... let's say £10 for ease. This is a very rough approach anyway.

There are 1000 ml in 1 liter. 1x US barrel = 159 ltr.

1x US barrel of Moebius 8000 sells for £10 * 1000 * 159 = £ 1.590.000,- = US $ 2.161.470 @ current exchange rate.

1x barrel of crude oil cost around $50 ....... deduct all the refinery, some additives cost, laboratory cost,  bottle and packaging cost. Then of course the taxes ...... a combination of Switzerland & Multinationals ..... 

What shelf life would you give it if you own Moebius ....... :angel:

And this is of course just one of their many different oils they sell ....

 

Edited by Endeavor
  • Like 1
Link to comment
Share on other sites

Some natural oils turn acidic with time. Hence why you get green gunge in oil sinks on brass clock plates.

I think the dates written on Moebius oils should only be considered as sell-by dates. Their fully synthetic oils should last a lot longer than their natural-based oils like D5 and 8200.

I own an Omega from 1997 which has never been serviced and is still running excellently. This is partly due to having an hermetically sealed case with screw-down crown. However, the oil still appears to be doing it's job.

I keep thing I should get a glass plate and place several droplets of different lubes down to see how they dry and deteriorate over the years.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Looks that way, if it had any amount of significant jewel count it would say so on the dial.    Looks that way, if it had any amount of significant jewel count it would say so on the dial.  Same answer as Mike regarding the dial, its often just a slapped on name of a retailer but i thought you were way above this understanding Pete ?
    • Light naptha is what you need to be looking for. The carbon to hydrogen ratio is high with heavy naptha, it doesn't evaporate as well as light naptha and is prone to leaving more residue. Try tom's suggestion of the mirror test.
    • Its a big item Michael and a lot that could go wrong with the process of getting it to its new location. I once helped install one of these units into a conservatory that i had built. It was big and bloody heavy and took six of us to get it in safely. If you have sliding doors and you need to remove the whole frame then that may or may not go well. But i would advise getting a professional in if you have little knowledge on the installation of them. The glazing of the doors could well be 6mm laminated glass which again will be heavy very heavy if the glazing units are big. The glass would also need to be set up and packed correctly to open the doors properly more so if they are unframed and the sliders are upvc. Seems a shame but if no one is biting and that may be due to having no warranty i guess the only takers might be someone that installs them for a living and knows how to repair. If its fibreglass just be careful, i sometimes have to cut fibreglass baths out and they are nasty to work with . Thick gloves are definitely recommended,  not fun picking out fibreglass spells two days later that have started to go septic. Good luck with it all matey.
    • I don’t know anything about this product, however assuming you have it if you put a drop on a mirror or piece of glass lying flat on a table and leave it to evaporate if it leaves any sort of residue it is not really suitable for watch part cleaning.   Tom
    • Well I put the spa on Gumtree (selling service) to try and sell it as it only needs a recirc pump to get it going. However, it weighs circa 250kg, so there's 4 fairly strong guys, and I would have to remove the sliding door in the room completely to be able to get it out, as well as clearing out a multitude of potted plants and the Alfresco outdoor setting to be able to get it out. Then move nearly everything in the back of the garage to be able to push it through to the front of the house. I would also need to hire furniture skates to be able to shift it around as carrying it is out of the question. Then someone would need a trailer to get it to their place as you won't get it on the back of a ute. So, the only answer is, out with the reciprocating saw and cut it all up into manageable pieces. Crying shame as it is in really good nick. I was only asking $1,500 and only got two bites, but it would only take something to go wrong with removing the sliding door etc that everything I make on the sale could go out the door on repairs etc. It would have been nice to be able to turn it into tools etc, but que sera sera. I don't know about the rest of the world, but there just seems to be very little interest from people wanting to buy things secondhand.  
×
×
  • Create New...