Jump to content

Ronda (915) Battery Change


MikeB

Recommended Posts

Have 3 watches with Ronda 915, 5 jewel. Fresh 371 Energizer batteries. Two have orange isolators, one does not.  Can't get any of the three to work!!! Installing plus up with the crown out.

What is the easiest way to check the movement? Use Renata batteries instead?

Have changed many batteries over the years but this has me stumped. 

HELP

 

Link to comment
Share on other sites

There isn’t much information to go on here. Can you check all the batteries with a voltmeter or try them in a working movement? Also, I know it’s obvious, but you are pushing the crown back in afterward,right? Sorry, have to ask, anything is possible. Can you take a picture or two? I don’t find a 915 movement number on their movement manuals site. Steve


Sent from my iPad using Tapatalk Pro

Link to comment
Share on other sites

A picture of the movement would be nice so we can see how the contacts are arranged. Googling is revealing that the Ronda 915 Doesn't appear to exist?  Then there is always a minor possibility the shape of the battery may be preventing the watches working.

Link to comment
Share on other sites

MikeB

As the others have said a picture would be useful as I can only find Ronda 519 but that's not a 5 jewel movement.

Also, have these been left with a discharged battery for any length of time?





Sent from my Moto G (4) using Tapatalk

Link to comment
Share on other sites

12 hours ago, MikeB said:

Have 3 watches with Ronda 915, 5 jewel. Fresh 371 Energizer batteries. Two have orange isolators, one does not.  Can't get any of the three to work!!!

Have you bought these recently? Maybe they have been sold because they were broken. 

Link to comment
Share on other sites

I once had a movement that would not run after battery change, even trying several batteries of the same make.   I got it going by sticking a small piece of insulation on the -ve battery tag (connects to the bottom of the battery) where it goes from the edge of the battery to the movement.  I suspect the replacement battery shape was different from the original renata fitted and was shorting at this point.  Maybe worth a try.

Link to comment
Share on other sites

Ah right I recognize that Ronda well, and for all the wrong reasons.

There's two things people do to those movements practically all the time, one is to crush the battery contact to the side with the battery.

The second is scratch the coil while bending back that awkward battery retaining arm. The coils on these movements have no protective lacquer which means it wouldn't even have to be a scratched from a tool, it can be damaged just by touching with your bare fingers. 

  • Like 1
Link to comment
Share on other sites

There's no AC function (where you connect two points with tweezers to reboot a watch) on this watch if that's what you mean by short start.
A few things i can see from the blurry pictures is that in 3rd picture your battery retaining arm is locked back and its also caught under the gear train bridge, best unscrew the top plate completely (as opposed to trying to bend it out) and refit in the proper position. There is a very clear mark of some kind on the first pictures coil.  Also on the third picture it seems to have been made with a longer contact point, which has possibly jammed into the date ring below. 

Lastly, i guess the movement frames were removed but you still have them to put back in?
 

Link to comment
Share on other sites

Ishima. Thanks for you help and quick response. I see the retaining arm problem in pic 1 and long contact in pic 3. Yes, I have all three movement frames. Have attached movement data sheet to assist with part no. communication.

How do I release jammed contact on pic 3?

Is there a way to test coil? (Without damaging?)

Does the orange insulator fit over or under contact?

Do I need to screw down the battery retaining arm or just make sure it is seated under screw?

Mike

Datasheet_715_Complete_technical_documentation.pdf

Link to comment
Share on other sites



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...