Jump to content

My First Staking Set Advice


Recommended Posts

Finally found a good staking set!!  I've been looking for one since I started watch repairing a few months back.  But most I saw had either just been sold, missing parts, or in bad condition.

 

But eureka!  I got one that fits the bill (including cannon pinion resizers, and a micrometer for jewel replacement), and wasn't going to let it pass up, or let one of you buggers snag it before me this time.   ;)

 

I highly recommend to be patience when looking for a staking set, as good ones do come up from time to time.

Here's the pics ... cause we all love da pics:

 

post-246-0-58070800-1412494391_thumb.jpg

 

post-246-0-07730300-1412494398_thumb.jpg

 

post-246-0-04521300-1412494407_thumb.jpg

 

post-246-0-51721700-1412494411_thumb.jpg

 

post-246-0-64550600-1412494415_thumb.jpg

  • Like 4
Link to comment
Share on other sites

bobm12, on 06 Oct 2014 - 11:43 AM, said:

Oh by the way, mine isn't that complete either, this one is a real beauty and in mint condition!

 

I was very blessed to get this one.  My Lord indeed looks after me!

 

Still wanna see the pics of yours my friend,  get posting mate B)  

Link to comment
Share on other sites

Well, I just received my 18R. I haven't really sorted out what goes where and probably be finishing the case but everything looks in good order and as a bonus I got the book Geo recommended and a jewel gauge I think! It was a little bit pricey but I figure it has most what I will need in quite a while. So, at Lawson's request, here it is:

 

 

post-253-0-18140100-1412832532_thumb.jpg

Link to comment
Share on other sites

Awesome set there Bob!

I thought you said there was items missing?  It looks complete to me mate.

Please correct me if I'm wrong, but from what I researched they are a 100 piece kit, with slots for 114 items: so 14 extra slots.

 

Oh ....and as Marjorie says ....

 

post-246-0-40047900-1412836831_thumb.jpg

Link to comment
Share on other sites

I have had a K&D staking set for a few years now.

The only issue I have is some of the really small holes are blocked and no mattter what I have tried they will not unblock. I now have to use a stump when I need a small hole. Also I had a few of the punches missing but I found the Bergeon punches fit Ok and purchased from Cousins.

Link to comment
Share on other sites

Thank you Lawson, I was also pleasantly surprised when I got it last night! It seems all the slots are filled so I'd say 100 plus stakes, stumps et al. The vendor even sent the original manual -- it is not in the picture but inside the book since it was kind of old - He also sent the book which is brand new (Amazon US$45) and the jewel gauge. Everything seems in good order and no stake is clogged. I found myself unpacking very old small, vintage and unopened boxes from many years back to fill the places in the box. I believe this is a fortunate deal not just because of what I got but for discovering the vendor who is very meticulous and take good care the old fashioned way!

 

I also second Geo, clockboy, since I see myself ordering some of the Bergeon parts for this set when I need it. Thanks for the tip.

 

Thank you Daniel, it is and I'm very happy with it. If you need it I'll forward the vendor's link I dealt with. He seems to have still another set.

Link to comment
Share on other sites

Even though I'm nowhere near actually needing these tools, I'm still watching a few on eBay. The K&D Inverto / Sietz Jeweling tool set looks like a great deal. I wish I could afford it as I'm sure someday I will need one.

Link to comment
Share on other sites

You are welcome Daniel.

 

By the way guys, I have a little problem I can't figure out, in my home computer the paste icons in the editor won't work and the pictures won't show their path when I add them in the editor box. At work they do fine. Is there a setting I'm missing in my home computer. Should I turn on the compatibility setting in the tools option in my browser. I use IE11.

Link to comment
Share on other sites

bobm12, on 10 Oct 2014 - 03:38 AM, said:

By the way guys, I have a little problem I can't figure out, in my home computer the paste icons in the editor won't work and the pictures won't show their path when I add them in the editor box. At work they do fine. Is there a setting I'm missing in my home computer. Should I turn on the compatibility setting in the tools option in my browser. I use IE11.

 

I find sometimes I have to open MS Paint and paste the image in there first and safe it to HDD.  IE11 is a true disaster of the browsers mate, have a look at the THOR browser, it's firefox on crack :)

Link to comment
Share on other sites

By the way, I sent the person that sold me the staking set a thank you message.

 

He said they provide the same attention to their customers no matter how little the order is. He also said he will have a similar set available in a couple of weeks. It is going to be smaller: 100 stakes.

 

In any case, I find he is an excellent guy to do business and very nice to deal with according to my experience.

 

@ Lawson: I've been meaning to tell you Lawson, but it is always slipping, I love Marjorie's picture! :thumbsu:

Edited by bobm12
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
    • Hold the crown when in winding position, move the click away from the crown wheel, and then while holding the crown let it slowly unwind. I recollect that you must remove the automatic device bridge first, but maybe I'm wrong. You can first try without removing the automatic device bridge.
×
×
  • Create New...