Jump to content

My First Staking Set Advice


Recommended Posts

Finally found a good staking set!!  I've been looking for one since I started watch repairing a few months back.  But most I saw had either just been sold, missing parts, or in bad condition.

 

But eureka!  I got one that fits the bill (including cannon pinion resizers, and a micrometer for jewel replacement), and wasn't going to let it pass up, or let one of you buggers snag it before me this time.   ;)

 

I highly recommend to be patience when looking for a staking set, as good ones do come up from time to time.

Here's the pics ... cause we all love da pics:

 

post-246-0-58070800-1412494391_thumb.jpg

 

post-246-0-07730300-1412494398_thumb.jpg

 

post-246-0-04521300-1412494407_thumb.jpg

 

post-246-0-51721700-1412494411_thumb.jpg

 

post-246-0-64550600-1412494415_thumb.jpg

  • Like 4
Link to comment
Share on other sites

bobm12, on 06 Oct 2014 - 11:43 AM, said:

Oh by the way, mine isn't that complete either, this one is a real beauty and in mint condition!

 

I was very blessed to get this one.  My Lord indeed looks after me!

 

Still wanna see the pics of yours my friend,  get posting mate B)  

Link to comment
Share on other sites

Well, I just received my 18R. I haven't really sorted out what goes where and probably be finishing the case but everything looks in good order and as a bonus I got the book Geo recommended and a jewel gauge I think! It was a little bit pricey but I figure it has most what I will need in quite a while. So, at Lawson's request, here it is:

 

 

post-253-0-18140100-1412832532_thumb.jpg

Link to comment
Share on other sites

Awesome set there Bob!

I thought you said there was items missing?  It looks complete to me mate.

Please correct me if I'm wrong, but from what I researched they are a 100 piece kit, with slots for 114 items: so 14 extra slots.

 

Oh ....and as Marjorie says ....

 

post-246-0-40047900-1412836831_thumb.jpg

Link to comment
Share on other sites

I have had a K&D staking set for a few years now.

The only issue I have is some of the really small holes are blocked and no mattter what I have tried they will not unblock. I now have to use a stump when I need a small hole. Also I had a few of the punches missing but I found the Bergeon punches fit Ok and purchased from Cousins.

Link to comment
Share on other sites

Thank you Lawson, I was also pleasantly surprised when I got it last night! It seems all the slots are filled so I'd say 100 plus stakes, stumps et al. The vendor even sent the original manual -- it is not in the picture but inside the book since it was kind of old - He also sent the book which is brand new (Amazon US$45) and the jewel gauge. Everything seems in good order and no stake is clogged. I found myself unpacking very old small, vintage and unopened boxes from many years back to fill the places in the box. I believe this is a fortunate deal not just because of what I got but for discovering the vendor who is very meticulous and take good care the old fashioned way!

 

I also second Geo, clockboy, since I see myself ordering some of the Bergeon parts for this set when I need it. Thanks for the tip.

 

Thank you Daniel, it is and I'm very happy with it. If you need it I'll forward the vendor's link I dealt with. He seems to have still another set.

Link to comment
Share on other sites

Even though I'm nowhere near actually needing these tools, I'm still watching a few on eBay. The K&D Inverto / Sietz Jeweling tool set looks like a great deal. I wish I could afford it as I'm sure someday I will need one.

Link to comment
Share on other sites

You are welcome Daniel.

 

By the way guys, I have a little problem I can't figure out, in my home computer the paste icons in the editor won't work and the pictures won't show their path when I add them in the editor box. At work they do fine. Is there a setting I'm missing in my home computer. Should I turn on the compatibility setting in the tools option in my browser. I use IE11.

Link to comment
Share on other sites

bobm12, on 10 Oct 2014 - 03:38 AM, said:

By the way guys, I have a little problem I can't figure out, in my home computer the paste icons in the editor won't work and the pictures won't show their path when I add them in the editor box. At work they do fine. Is there a setting I'm missing in my home computer. Should I turn on the compatibility setting in the tools option in my browser. I use IE11.

 

I find sometimes I have to open MS Paint and paste the image in there first and safe it to HDD.  IE11 is a true disaster of the browsers mate, have a look at the THOR browser, it's firefox on crack :)

Link to comment
Share on other sites

By the way, I sent the person that sold me the staking set a thank you message.

 

He said they provide the same attention to their customers no matter how little the order is. He also said he will have a similar set available in a couple of weeks. It is going to be smaller: 100 stakes.

 

In any case, I find he is an excellent guy to do business and very nice to deal with according to my experience.

 

@ Lawson: I've been meaning to tell you Lawson, but it is always slipping, I love Marjorie's picture! :thumbsu:

Edited by bobm12
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
    • Sounds like the story with my Rolex. Poor (expensive) job done by an official Rolex dealer with an "in-house" watchmaker, hence I learned watchrepair and did the servicing myself. Same story as I learned with the Omega 861, again poor job by an "in-house" watchmaker by an official Omega dealer. Once your watch goes through that back-door, you have no idea what is going to happening to it 🫣   Quite nice that they sent back the parts which had been replaced !
    • yes that's definitely not right at all. I have a picture one of my friends has a Omega coaxial there was having issues to lose asking me where he should send it. As that's a specialty watch I suggested the service center. When he got it back he sent me a picture so the replace the dial as you can see the hands the mainspring barrel and I think the price was really quite decent considering all the stuff they can replace. So I do know they do change the barrels but the other person I worked at the service center when I would ask questions and unfortunately I can't remember all the answers. I think a lot of the changing a parts is at the discretion of the watchmaker. Plus I don't know enough about the chronographs and whether that would be considered a vintage watch? I take some of the vintage watches may have been sent directly to Switzerland or another service center. Obviously with a watch like the one down below they probably have a infinite supply of parts is its relatively modern vintage stuff becomes more interesting even the watch companies don't have necessarily infinite supply of parts. But no matter what the watch shouldn't disintegrated six months that's definitely an issue.        
×
×
  • Create New...