Jump to content

My First Staking Set Advice


Recommended Posts

Finally found a good staking set!!  I've been looking for one since I started watch repairing a few months back.  But most I saw had either just been sold, missing parts, or in bad condition.

 

But eureka!  I got one that fits the bill (including cannon pinion resizers, and a micrometer for jewel replacement), and wasn't going to let it pass up, or let one of you buggers snag it before me this time.   ;)

 

I highly recommend to be patience when looking for a staking set, as good ones do come up from time to time.

Here's the pics ... cause we all love da pics:

 

post-246-0-58070800-1412494391_thumb.jpg

 

post-246-0-07730300-1412494398_thumb.jpg

 

post-246-0-04521300-1412494407_thumb.jpg

 

post-246-0-51721700-1412494411_thumb.jpg

 

post-246-0-64550600-1412494415_thumb.jpg

  • Like 4
Link to comment
Share on other sites

bobm12, on 06 Oct 2014 - 11:43 AM, said:

Oh by the way, mine isn't that complete either, this one is a real beauty and in mint condition!

 

I was very blessed to get this one.  My Lord indeed looks after me!

 

Still wanna see the pics of yours my friend,  get posting mate B)  

Link to comment
Share on other sites

Well, I just received my 18R. I haven't really sorted out what goes where and probably be finishing the case but everything looks in good order and as a bonus I got the book Geo recommended and a jewel gauge I think! It was a little bit pricey but I figure it has most what I will need in quite a while. So, at Lawson's request, here it is:

 

 

post-253-0-18140100-1412832532_thumb.jpg

Link to comment
Share on other sites

Awesome set there Bob!

I thought you said there was items missing?  It looks complete to me mate.

Please correct me if I'm wrong, but from what I researched they are a 100 piece kit, with slots for 114 items: so 14 extra slots.

 

Oh ....and as Marjorie says ....

 

post-246-0-40047900-1412836831_thumb.jpg

Link to comment
Share on other sites

I have had a K&D staking set for a few years now.

The only issue I have is some of the really small holes are blocked and no mattter what I have tried they will not unblock. I now have to use a stump when I need a small hole. Also I had a few of the punches missing but I found the Bergeon punches fit Ok and purchased from Cousins.

Link to comment
Share on other sites

Thank you Lawson, I was also pleasantly surprised when I got it last night! It seems all the slots are filled so I'd say 100 plus stakes, stumps et al. The vendor even sent the original manual -- it is not in the picture but inside the book since it was kind of old - He also sent the book which is brand new (Amazon US$45) and the jewel gauge. Everything seems in good order and no stake is clogged. I found myself unpacking very old small, vintage and unopened boxes from many years back to fill the places in the box. I believe this is a fortunate deal not just because of what I got but for discovering the vendor who is very meticulous and take good care the old fashioned way!

 

I also second Geo, clockboy, since I see myself ordering some of the Bergeon parts for this set when I need it. Thanks for the tip.

 

Thank you Daniel, it is and I'm very happy with it. If you need it I'll forward the vendor's link I dealt with. He seems to have still another set.

Link to comment
Share on other sites

Even though I'm nowhere near actually needing these tools, I'm still watching a few on eBay. The K&D Inverto / Sietz Jeweling tool set looks like a great deal. I wish I could afford it as I'm sure someday I will need one.

Link to comment
Share on other sites

You are welcome Daniel.

 

By the way guys, I have a little problem I can't figure out, in my home computer the paste icons in the editor won't work and the pictures won't show their path when I add them in the editor box. At work they do fine. Is there a setting I'm missing in my home computer. Should I turn on the compatibility setting in the tools option in my browser. I use IE11.

Link to comment
Share on other sites

bobm12, on 10 Oct 2014 - 03:38 AM, said:

By the way guys, I have a little problem I can't figure out, in my home computer the paste icons in the editor won't work and the pictures won't show their path when I add them in the editor box. At work they do fine. Is there a setting I'm missing in my home computer. Should I turn on the compatibility setting in the tools option in my browser. I use IE11.

 

I find sometimes I have to open MS Paint and paste the image in there first and safe it to HDD.  IE11 is a true disaster of the browsers mate, have a look at the THOR browser, it's firefox on crack :)

Link to comment
Share on other sites

By the way, I sent the person that sold me the staking set a thank you message.

 

He said they provide the same attention to their customers no matter how little the order is. He also said he will have a similar set available in a couple of weeks. It is going to be smaller: 100 stakes.

 

In any case, I find he is an excellent guy to do business and very nice to deal with according to my experience.

 

@ Lawson: I've been meaning to tell you Lawson, but it is always slipping, I love Marjorie's picture! :thumbsu:

Edited by bobm12
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I wish they would have done so in this case. The whole story went like this: I sent my speedmaster to an omega service center about 10 years ago (at that point of time I haven't even started watchmaking). After the watch came back to me it had only about 6 months wristtime until january 2024 (not fair for this nice watch but the other pieces of my collection want wristtime too 🙂). So my conclusion is that the barrel was already faulty when it came back from service, can't imagine that amount of wear in 6 months wristtime. In january 2024 the performance on the wrist was quite bad, so I decided to have a look by myself. I have to admit that I didn't check the barrel close enough as I thought it must be ok, couldn't have issues after official omega service. That was a mistake, I will learn from that. Follow the golden rule: Nothing is certain except death and taxes.
    • I am same as you oldhippy I won’t touch anything with a battery, I keep getting requests to but I just say I only do mechanical clocks, there are quite a few errors & omissions with the repair guide have a look at this. https://mb.nawcc.org/wiki/Encyclopedia-Subjects/Torsion-Clocks/Book:Horolovar-400-Day-Clock-Repair-Guide-10th-Edition-Errors-and-Updates
    • Nice experiment. As it will be no problem, please put a twice less mass (half of the two penies) and read the amplitude, will be interesting. I mean to determine what is the relation torque/amplitude.
    • parts touching that aren't supposed to touch definitely would cause an issue. there not supposed to be touching there supposed to be independent which means that @VWatchie is correct that the ratchet wheel has no effect on performance. so if the ratchet wheel in your particular case is touching that is definitely going to be an issue and needs to be addressed. did you know that the Swatch group service centers do not change mainsprings? Swatch group service centers have an infinite supply of spare parts so they just change the mainspring barrel the whole thing. Plus anything else the watchmaker doesn't like just gets replaced like anything related to the escapement they just replace the components because they can.
    • The pivots look OK. In this position, balance may rub on the pallet bridge, the roller table may rubb on the pallet fork, the bottom of roller table may rubb on the main plate, and on the tip of the screw that fixes the bottom endstone plate, the impulse jewel may rubb on guard pin, the rounded part of the pivot may rubb on the hole jewe too. Thiss all may be due to broken, missing or moved down endstone, or the plate with the stone has some dirt or other obsticle under it. But, sometimes different odd reasons can exist, like for example someone has changed the balance from a donnor movement. All the reasons are visible and must be checked. For beginning, remove the lever and it's bridge and do the free oscillations test.
×
×
  • Create New...