Jump to content

The begining

Orville

By Orville
in Introduce Yourself Here

 Share

Recommended Posts

Orville New Member

Orville

Posted
Posted

I might have chimed in before but I could not find the post if I did.  So, in keeping with my normal watch practice, I'll do it again.

I'm in Tijuana Mexico, almost retired and decided to learn about the 30 or so watches I have because they, like me, are getting old.

Watched all of Kevin's videos which inspired me to go for it.  I've spent more time on my knees her than I am sure the Pope has at the Vatican.

I am self learning on a simple and inexpensive movement, the Elgin 554.  So I bought up a bunch of them.  They helped a lot.  My weakness is in handling the balance and I have a lot of microminiature scouring pads to prove it.

So I decided to focus on hairsprings and hairspring manipulation in order to be able to deal with hairspring issues when they arise.  I figure I'll spend a year on that.  In the meantime I will, of course, work on the Elgin movements in order to clean up things like getting the tweezers handling right, learning all about screwdrivers etc.  I've replaced balance staffs and reinstalled balances and put the watches back together, but I must learn everything there is to know about hairsprings.

Learning how to use the tools has been a major part of learning to work on the watches.  The right tools for the right job, handling screws so you're not chasing them down the street, all that is vital.  So I have a long road ahead and a lot of watches to service.

Thanks to Kevin and thanks to all of you for being so kind and so giving of your experience.  Micromechanics is a whole new universe.  A great place to lose yourself in.

  • Like 3
Link to comment
Share on other sites
ecodec WRT Addict

ecodec

Posted
Posted

Hi Orville and welcome. You are doing very well and working very constructively. For the hair spring study obtain a copy of Donald de Carles "Practical Watch Repairing."  It is an excellent and comprehensive study in my opinion and that of many others. It  well covers hairsprings  in theory and practice  and the Breguet overcoil hairspring also. Split balances and monometal balances are detailed  Figures for steel and Invar, Elinvar and Beryllium are  also covered.  I feel sure you will enjoy watch repairing and there are are a lot of very experienced and helpful people on this site. All good wishes, Mike. UK.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Thanks, This watch was in a box of old scrape units that a friend gave me. They used to be his late father's who was a watchmaker before the war and then continued later in life. I picked this one out as it looked like it had potential, and I liked the dial, it's been a bit of a learning curve for a beginner but I was determined to get it going. Now I'm on the final lap it feels good. I'm just wondering whether to invest in a decent set of hand placement tools or stick with the cheap Chinese red thing I have, decisions decision 😆
    • Klassiker
      Landeron 248 hammer and cam interaction

      By Klassiker · Posted

      An update, for everyone who contributed advice, and for those who come after with a similar problem. Based on the answers received, I decided to work on the face of the hammer first. I used a square degussit stone to guarantee a vertical surface to work against, and ground the face back until it was square across 90% of the depth. I was conscious of the risk of removing too much material.* After I'd got the shape how I wanted it, I polished the surface with lapping film. To cut a long story short, it did the trick and the hammer hasn't slipped off the cam since. Of course, that wasn't the end of my problems. Have a look at this video and tell me what you think is wrong. https://youtu.be/sgAUMIPaw98 The first four attempts show (0 to 34 sec.) the chrono seconds hand jumping forwards, the next two attempts (35 to 47 sec.) seem "normal", then on the seventh attempt (48 to 54 sec.) the seconds hand jumps to 5 sec. and the minute counter jumps to 1. The rest of the video just shows repeats of these three variants. I solved it by rotating the minute counter finger on the chronograph (seconds) runner relative to the cam.  I'd be interested to hear your opinions on that. It seemed to be the right thing to do, but maybe I've introduced another problem I'm not aware of. * What is the correct relationship between the two hammers and cams, by the way? Should both hammers strike the cams exactly at the same time, or is it correct for the minute counter hammer to be a bit behind the seconds hammer? In this picture, I removed the adjusting screw at 1, and the hammers are contacting the cams simultaneously at 3 and 4. I had to turn the screw down tight to achieve this condition after stoning the seconds hammer and replacing the bridge.
    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      It was easy enough to pop off. Once I had the cannon pinion hanging on the blades of the stump, I got my #2 tweezers on the gear attached to the staff and levered it down. That way none of the force was on the brass wheel itself.   I reinstalled it and the bridge, and it looks like a small but reasonable amount of end shake. It also spins easily with a blower. It stops quickly, but I think that's due to the large shoulder and about what I'd expect from this wheel.  
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Oh, right. For some reason I was picturing a monocoque case in my head. Good looking watch!
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Well said Ross. My reason for the thread, i like many of us dont want to lose the forum, such a well knitted group of individuals i feel. But things can happen out of anyone's control. Would be nice to have something in place just in case, if anyone has any ideas please speak up. 
×
×
  • Create New...