Miyota 6P23 how to remove the stem

[WildBill]

Hi, Can anyone  tell me how to remove the stem and crown from a Miyota 6P23 Quartz movement

cant find anything to unscrew or press...Thanks

[PJA]

Check the attached proper manual it might help you.

http://www.accurist.co.uk/customer-support/instruction-manuals/

[Ishima]

Stem is pulled out, needs to be in position 0 (fully in) for the lever to show. The fact that the movement is so rusty might not help either.

Looks like you've linked to user manuals PJA, they wouldn't contain technical information for maintenance and repairs. 

Edited December 7, 2017 by Ishima

[WildBill]

I have a new movement to put in, I should be able to see the lever on that....

[PJA]

21 minutes ago, Ishima said:

Looks like you've linked to user manuals PJA, they wouldn't contain technical information for maintenance and repairs. 

1

I wasn't aware of it. Thanks.

[Ishima]

Best thing to do if you cant find a stem release is to change the winder positions until you see the lever moving in and out of view. 

[ro63rto]

If the lever doesn't appear, just snip through the stem since you are replacing the movement.

[jdm]

Not sure why an "appearing lever" is mentioned, as this movement doesn't have one. The attached drawing shows the stem release position. 

draw_6P23.pdf

[ro63rto]

Not sure why an "appearing lever" is mentioned, as this movement doesn't have one. The attached drawing shows the stem release position. 
draw_6P23.pdf

Cos it's rusty and might not be in the correct position to begin with ?

[Mark]

Moving to the help and advice section

[WildBill]

Thanks ro63rto, the PDF Drawing work fine, although I couldn't get the stem out of the old movement had to take a couple of pieces out to see the inside then it came out OK, as you can see watch works fine now...Thanks to all who helped... 

Sorry having trouble uploading pics again...