Jump to content
  • Similar Content

    • By lordpagano
      Hi everyone! I bought an Aeromatic 1912 A1308 watch (have not received it yet) and I was wondering what caliber does it use. By chance I found the attached pictures, I believe it's the same caliber but I found no information on it, only that it may be a Seagull. Can somebody help?
      Thank you!!

    • By Mark
      Join me as I strip down, service and review this Chinese ETA 2892-A2 clone. Seagull ST1812 watch movement. There was a couple of issues to deal with but altogether a fairly impressive movement for the price.
    • By dferrier
      Here is how one guy did it:
       

    • By haratua
      I just got a new Chinese movement (TY2867), and when I push the winder in, the movement won't start. I've manually wind it a few times, pull the winder out and push it back in.
      What could be the issue? Thanks
    • By haratua
      I am struggling to find a way to remove the movement on this large Ingersoll watch from its case. Cannot seem to find any screws that pin the movement to the case. 
       
      Tried to remove the steel spacer, it is un-movable even with pliers.
      Does it mean that that I have to come from the glass? If through the glass, do I pry on the small opening on the bezel (see the second picture attached)?
       
      Appreciate any helps. Thanks.
         
       
       


  • Recently Browsing

    No registered users viewing this page.

  • Topics

  • Posts

    • Very nice watch you have there! I know you’re proud of it! Sent from my iPhone using Tapatalk Pro
    • Very nice! I have an old Miyota movement That needs a new home. You’re giving me ideas! Sent from my iPhone using Tapatalk Pro
    • That’s a great watch! Sent from my iPhone using Tapatalk Pro
    • Hello everybody. I lived in Texas 51 years before moving “up north” to Oklahoma last year. One of my passions is fixing things - working on the house, appliances, cars, trucks, motorcycles, lawnmowers, and anything else that needs fixing and I’ve been good at it except when it comes to watches - what a humbling experience. Googling “broken set lever screw 6497” led me down a trail that led to this forum.   For watches: I like just about everything regardless of cost. I have a 1969 Datejust that my grandfather bought new (my watch addiction started there when I was little), and a 1966 Datejust I recently picked up, an Omega AT, a few Seikos, a Vostok, a couple Citizens, an old Bulova, a few Timexes, and a wristwatch-from-pocketwatch conversion with a genuine 6498 movement. Like many of y’all I’m sure, I’ve bought and sold a ton of watches since 1985 and haven’t slowed down.   The embarrassing screw-breaking watch is a Panerai look-alike with an ST36 Chinese copy of a 6497. It’s cheap but I figured it was good to learn on. Water was getting in, and the set lever screw was stuck so I broke it trying to get the stem out. Broke the two stuck movement mounting tab screws also, probably due to the water. Got a new ST36 and broke the same dang set lever screw trying to replace the stem. Can’t blame the water this time. Had no idea a tiny screwdriver could deliver enough torque to break screws. The price of education... I need to enroll in a course and stop red-necking this stuff.   I have plenty ST36 parts if y’all need any -except screws....   Great to be here,   Bobo         Sent from my iPhone using Tapatalk Pro  
    • Hi William, Welcome to the forum. Have been to Elvis and Dolly parton show at Grand ole opry.  Carried out research work in the Atomic City.    Glad to have you here with us. Best wishes. Joe
×
×
  • Create New...