Jump to content

Silicone Grease (For Gaskets)

rodabod

By rodabod
in Watch Repairs Help & Advice

 Share

Recommended Posts

rodabod Distinguished Member

rodabod

Posted
Posted

I bought this from Cousins which was advertised as Silicone grease. Immediately I noticed that it smelled a bit like dubbin (animal fat) and also a bit like shoe polish. The colour is also amber. 

I heated a blob of it and it immediately melted and ignited, and when I distinguished it, it continued to leave a white smoke, like a candle. 

I told Cousins that I didn't believe that it was Silicone, so they've asked the manufacturer Ho have replied saying that it is indeed silicone grease. 

Is there anything I can do to prove it otherwise? I don't care about the cost of it (£3) - it's just the principle of buying something which isn't quite what you expected. I just can't believe that this is silicone grease. 

 

 

image.jpeg

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
54 minutes ago, rodabod said:

I bought this from Cousins which was advertised as Silicone grease. Immediately I noticed that it smelled a bit like dubbin (animal fat) and also a bit like shoe polish. The colour is also amber. 

I heated a blob of it and it immediately melted and ignited, and when I distinguished it, it continued to leave a white smoke, like a candle. 

I told Cousins that I didn't believe that it was Silicone, so they've asked the manufacturer Ho have replied saying that it is indeed silicone grease. 

Is there anything I can do to prove it otherwise? I don't care about the cost of it (£3) - it's just the principle of buying something which isn't quite what you expected. I just can't believe that this is silicone grease. 

 

 

image.jpeg

Doesn't say it's silicon grease? 

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted

It's like Bergeon KT-22? It says silicon grease but it doesn't smell like silicon? And it's not working very good either? Have used it on gaskets and it makes the gasket stick to the crowntube in no time. Use Seiko silicon grease . That's the best? 

  • Like 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
17 hours ago, rodabod said:

I bought this from Cousins which was advertised as Silicone grease. Immediately I noticed that it smelled a bit like dubbin (animal fat) and also a bit like shoe polish. The colour is also amber. 

I heated a blob of it and it immediately melted and ignited, and when I distinguished it, it continued to leave a white smoke, like a candle. 

I told Cousins that I didn't believe that it was Silicone, so they've asked the manufacturer Ho have replied saying that it is indeed silicone grease. 

Is there anything I can do to prove it otherwise? I don't care about the cost of it (£3) - it's just the principle of buying something which isn't quite what you expected. I just can't believe that this is silicone grease. 

 

 

image.jpeg

That is  a Silicon applicator for gaskets. The foam/sponge is Impregnated with the silicone. I have used these applicators for many years with no issues. The gasket/ring is laid inside & then the lid is closed and twisted a few times to apply the silicone.

Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
  • Author
Posted

Thanks. My concern is specifically if the grease is actually silicone or not. I've opened watches with dissolved gaskets before, and it's quite probable that they've been dissolved by hydrocarbon-based greases. This stuff smells hydrocarbon based to me (a bit like shoe polish). 

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
2 hours ago, rodabod said:

Thanks. My concern is specifically if the grease is actually silicone or not. I've opened watches with dissolved gaskets before, and it's quite probable that they've been dissolved by hydrocarbon-based greases. This stuff smells hydrocarbon based to me (a bit like shoe polish). 

I'll be surprised if it is not Silicone. There are different types of silicone for example I have a small tub of "Seiko" silicone which is clear and very tacky. I have also some silicone that I purchased on the cheap from ebay and is it white and does not seem as tacky but it is however silicone. I suspect this is the type of silicone that is used in these pads to allow for easier transfer. 

Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
Posted

Back to your original question I don't really see you can do anything about it anyway if Cousins are insisting it is silicone.

Interesting point you raise though about KT-22. Bergeon don't say their version is silicone, I have some from an American company that doesn't  mention silicone and it certainly doesn't look like silicone. Yet both Cousins and Walshs call it silicone (well, Walshs call it silicon for some reason). Makes me wonder if the word is being used incorrectly to mean gasket grease or something like that?

Stephen

  • Like 2
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
On 11/15/2017 at 5:36 PM, rodabod said:

Is Bergeon KT22 definitely silicone? I've seen it advertised as silicone, but their website does not mention the word "silicone", whereas their other gasket grease does mention that it is silicone. 

Cousisnuk sell it as silicone grease. There is an other Bergeon product called silicon 7 . Interesting i will contact Bergeon and ask. 

Link to comment
Share on other sites
  • 3 weeks later...
ramrod Super WRT Addict

ramrod

Posted
Posted

I guess this begs the question: why is something OTHER than silicone used for case back gaskets if it destroys  them? 

I've had numerous Omega F300 casebacks that I've had to soak in lighter fluid to be able to dig them out of their groove. They were mush and turned into a sticky black mess merely from age.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • arron
      Ball PW balance staff and hands

      By arron · Posted

      @JohnR725 that's very helpful.  I appreciate the time you took to give those instructions and post the pictures.  below is a picture of my staff, which looks identical to the ones you posted.  The approx measurements I got are: .772 on the left part of the staff; .715 on the right side of the hub; the hub is 1.107; and the overall length (minus the broken pivot) is 5.248; which seem to line up with the measurements you posted.  I didn't think to measure the pivot, which I'll do if there's enough of one left on the staff.  Thanks again.
    • DDean
      Incabloc Lyre Spring & Low Earth Orbit

      By DDean · Posted

      Thank you to both of you!  I've been somewhat derailed by this quandary for a couple of days now. I am guessing that the point of the wider tweezers is to support the whole spring at the same time in an effort to prevent it going under tension... I have already discovered the Zen of a clutter free space, and trying to keep my work well away from the edge, however the most terrifying of the flights wasn't so short, I had my work in the middle of the table and nothing else around.  That particular launch was towards me.  I distinctly recall feeling the spring hit my left hand as it escaped.  I only found it by dumb luck, on the floor, between the legs of my chair.  I need to order a pack of replacements just in case.  I think I recall a thread discussing where to find them, and the differences between the clones and the authentic ETA ones, pointing out that they're not interchangeable (the clones being longer IIRC).  Now I just have to find that thread again.  What I haven't mastered is the zen of the search function here.  I'm sure I"ll get that down eventually. So this is similar to, but different from one of the posts I had found in my original searches (or maybe I'm just hallucinating, I can't find the post I thought I remember).  The bits about the corner filled in a gap in what I'd read before.  At least I have a more clear picture in my head about what needs to happen now.  Yes, I've learned about how touchy these springs are.  What I'm not sure I have a good grasp on is the understanding of what causes the spring to flex, other than to say "the slightest little touch"  I think I'm going to try a small bit of Rodico to position the spring next time.
    • HectorLooi
      Casio AQ-321G Battery

      By HectorLooi · Posted

      I think it's stamped on the inside cover. 309 I think.
    • Waggy
      Casio AQ-321G Battery

      By Waggy · Posted

      Hi all, needing a little help. I have an old Casio AQ-321G, but have no idea what battery it takes. I've looked around online, but cannot see anything... I see a 309 stamped on the case back, could this be it....? Can you please help, below are some pictures:
    • nevenbekriev
      'Services' Chronograph

      By nevenbekriev · Posted

      The radial teeth are for hte seconds register, and the other (which is simple and doesn' take away significant torque from the train) for the minutes register.
×
×
  • Create New...