Jump to content

Hello from Alabama

fireftr45

By fireftr45
in Introduce Yourself Here

 Share

Recommended Posts

fireftr45 New Member

fireftr45

Posted
Posted

Hello All, My name is Erik, a Swedish-American New Jersey native, living in coastal Alabama which is right next to Pensacola, Florida.  I am a recently retired firefighter and former US Navy Submariner.  I have been interested in watches all my life and got more serious about them nearly 10 years ago.  Mostly diver watches and pilot watches but I am starting to gain an interest and appreciation for all of them.  I have been "Modding" Seiko watches for about 5 or so years and want to go deeper into the movements and repair.

I just completed level 1 & 2 of the watch classes and am now starting to practice stripping a movement.  I am ordering a seagull unitas clone, but it won't be here till almost Christmas so I have begun to strip an old 7S26 Seiko movement down.  While Modding, I pushed to hard while putting the hands on and something popped.  In my tear down I discovered that the cannon pinion had popped free which accounts for the minute hand free spinning.

I am taking the advice (from the classes) seriously and just trying to just gain some experience with the tweezers and screwdrivers.  While taking apart the 7S26 I could see I'd need a lot of practice.  If you guys could've seen how badly I handled the balance complete, you'd be laughing!!  I managed not to have bent anything I hope, but Mark makes it look easy in the videos.  I did manage to get it reinstalled on the empty main plate while all of these parts await cleaning.

Ultimately, my goal is to restore 2 watches.  My Godfather's Welsbro Chronograph (1950's) with a Valjoux 7733, and my Grandfather's Record Geneve Curvex (1944).  I am placing no time limit on these goals as I am sure it will be some time till I have the confidence to touch them.  After that, I would like to restore old Seiko and Swiss watches and other projects I might like.

Looking forward to having some fun here and making some new friends!

Link to comment
Share on other sites
ecodec WRT Addict

ecodec

Posted
Posted

Hi Erik, All good stuff old boy. You have done well with Marks courses. He is as good as it gets. I was going for it but don`t really have the time. I am nearly 76 now  and am just an amateur repairer.  I was in electronic design MSc. Electronics and Just A level physics. I got into watches about 1962 as a hobby and started again 2 years ago. I have fixed many and only had one disaster, an  Omega Seamaster 300 which I should get on top of one day. It is my Grandsons and the balance is very worn and to boot I lost the top balance jewel under the incabloc lyre. Omega will sell you nothing. I may put an ETA  or similar movt: in it if one will fit Joe will not know the difference and it will keep good time. The Omega 552 can go in the drawer. Well, good wishes to you and keep em ticking !!.

s 

  • Like 1
Link to comment
Share on other sites
PJA WRT Addict

PJA

Posted
Posted
9 hours ago, fireftr45 said:

I just completed level 1 & 2 of the watch classes and am now starting to practice stripping a movement.  

Looking forward to having some fun here and making some new friends!

6

Hello there. This is a great group here and I am too, hope to take Mark's course sometimes.

  • Like 1
Link to comment
Share on other sites
fireftr45 New Member

fireftr45

Posted
  • Author
Posted
1 hour ago, vinn3 said:

Thanks for serving - UNDER WATER !  I  was just a "dry dock nuckel buster".  your  gona like it here.  vin

Likewise Vin!  I did 3 trips through the yards while on those boats, 2 fixed drydocks and 1 floater.  It was a neat experience but always ended up being winter in Connecticut.  Thanks again for the welcome!  Looking forward to it.

Link to comment
Share on other sites
  • 6 months later...
ecodec WRT Addict

ecodec

Posted
Posted (edited)

Hi fireftr45, you are doing very well, keep going and develop a very light touch with mechanical sympathy ! Be especially careful with the balance. Once the Balance is free I lift it out carefully with the tweezers under and over the wheel as the HS does not get stretched by this method. Keep going and all good wishes. Mike.

Edited by ecodec
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      Sounds great! And yes, I would use grease for the keyless as well although treating the parts with epilame would make the grease less likely to spread in the long run. Not critical but won’t hurt. My current strategy is to epilame treat all parts getting in contact with oil or grease.
    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      Hello everyone, for what it's worth, here is my approach: 1. Escape wheel submerged in Epilame, then dried quickly with a hairdryer. Then the final tip of the pivots are cleaned by poking into pithwood. The logic being that the Epilame is removed at the intended contact point (to avoid any residue that may mix with the oil), but remains in the areas where oil is not supposed to spread to (further down the pivot towards the wheel). The escape wheel teeth also benefit from having Epilame to keep the 9415 in place.  2. I use a syringe to treat only the pallet stones. I suspend the pallet fork with some Rodico so that the stones hang downwards. I notably use a rather thick needle where a drop WON'T form, but rather where the Epilame liquid stays in the needle tip, which I then dip into the pallet stones. It requires some practice to get the right amount of Epilame into the needle tip, but it works for me now. This way, no drop will "jump" onto the pallet fork and potentially go all the way to the pivots.  3. I let the movement run for a few minutes without lubricating the pallet stones... to scrape off the Epilame in the intended contact "channel". Then I remove the balance again and lubricate the exit pallet stone with 3-4 successive drops. See the "channel" that forms on the pallet stone in the picture -- not so easy to see, but it's visible.       I am conflicted about the use of Epliame in balance jewel settings. My impression is that the two jewels sufficiently suspend the oil (even 9010). Apparently Rolex recommends NOT to use Epliame there (heard from a former Rolex service center watchmaker), as it could cause additional wear. Apart from that, I follow specific instructions where I can find them. E.g. the infamous Rolex reverser wheels or sometimes (parts of) the seconds wheel. Exception: I'm currently servicing an Eta 2824 and will probably ignore the service sheet that recommends treating the whole keyless works with Epilame and then using HP1300... I'll skip the Epilame and use 9504 grease.        
    • GuyMontag
      Movement holder made with 3D printer

      By GuyMontag · Posted

      I'm going to give this a try today/tomorrow on my UTC33/Seiko 66, thanks!
    • RichardHarris123
      Intro

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • oldhippy
      Without Our Forum

      By oldhippy · Posted

      Don't forget Mark is a hard working watch maker so he is also tied up with work. I'm sure he is keeping his eye on this forum making sure it is running along nicely. 
×
×
  • Create New...