Jump to content

Hello from Alabama


fireftr45

Recommended Posts

Hello All, My name is Erik, a Swedish-American New Jersey native, living in coastal Alabama which is right next to Pensacola, Florida.  I am a recently retired firefighter and former US Navy Submariner.  I have been interested in watches all my life and got more serious about them nearly 10 years ago.  Mostly diver watches and pilot watches but I am starting to gain an interest and appreciation for all of them.  I have been "Modding" Seiko watches for about 5 or so years and want to go deeper into the movements and repair.

I just completed level 1 & 2 of the watch classes and am now starting to practice stripping a movement.  I am ordering a seagull unitas clone, but it won't be here till almost Christmas so I have begun to strip an old 7S26 Seiko movement down.  While Modding, I pushed to hard while putting the hands on and something popped.  In my tear down I discovered that the cannon pinion had popped free which accounts for the minute hand free spinning.

I am taking the advice (from the classes) seriously and just trying to just gain some experience with the tweezers and screwdrivers.  While taking apart the 7S26 I could see I'd need a lot of practice.  If you guys could've seen how badly I handled the balance complete, you'd be laughing!!  I managed not to have bent anything I hope, but Mark makes it look easy in the videos.  I did manage to get it reinstalled on the empty main plate while all of these parts await cleaning.

Ultimately, my goal is to restore 2 watches.  My Godfather's Welsbro Chronograph (1950's) with a Valjoux 7733, and my Grandfather's Record Geneve Curvex (1944).  I am placing no time limit on these goals as I am sure it will be some time till I have the confidence to touch them.  After that, I would like to restore old Seiko and Swiss watches and other projects I might like.

Looking forward to having some fun here and making some new friends!

Link to comment
Share on other sites

Hi Erik, All good stuff old boy. You have done well with Marks courses. He is as good as it gets. I was going for it but don`t really have the time. I am nearly 76 now  and am just an amateur repairer.  I was in electronic design MSc. Electronics and Just A level physics. I got into watches about 1962 as a hobby and started again 2 years ago. I have fixed many and only had one disaster, an  Omega Seamaster 300 which I should get on top of one day. It is my Grandsons and the balance is very worn and to boot I lost the top balance jewel under the incabloc lyre. Omega will sell you nothing. I may put an ETA  or similar movt: in it if one will fit Joe will not know the difference and it will keep good time. The Omega 552 can go in the drawer. Well, good wishes to you and keep em ticking !!.

  • Like 1
Link to comment
Share on other sites

9 hours ago, fireftr45 said:

I just completed level 1 & 2 of the watch classes and am now starting to practice stripping a movement.  

Looking forward to having some fun here and making some new friends!

6

Hello there. This is a great group here and I am too, hope to take Mark's course sometimes.

  • Like 1
Link to comment
Share on other sites

1 hour ago, vinn3 said:

Thanks for serving - UNDER WATER !  I  was just a "dry dock nuckel buster".  your  gona like it here.  vin

Likewise Vin!  I did 3 trips through the yards while on those boats, 2 fixed drydocks and 1 floater.  It was a neat experience but always ended up being winter in Connecticut.  Thanks again for the welcome!  Looking forward to it.

Link to comment
Share on other sites

  • 6 months later...

Hi fireftr45, you are doing very well, keep going and develop a very light touch with mechanical sympathy ! Be especially careful with the balance. Once the Balance is free I lift it out carefully with the tweezers under and over the wheel as the HS does not get stretched by this method. Keep going and all good wishes. Mike.

Edited by ecodec
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • This is a very sad day for the industry.. For most of us being amateurs the cost of replacing parts for ETA,s etc will be beyond affordability for the customers.   see full statement below   We have now received the decision from Judge Michael Green on whether or not the High Court has jurisdiction to hear our claim against Swatch, and sadly it is not the decision we had hoped for.   As we have pointed out in previous news items (see below),the rules that Judge Green had to apply strictly prevented him from examining in any way how the Swiss Court arrived at its verdict, even if it is blatantly obvious that the verdict is wrong.   As Swatch’s lawyer was summing up in the last few minutes oft he hearing, the Judge twice pinned him asking if it was alright if, as a result of the Swiss verdict, consumers had to pay 50% more for their watch repairs. After some stumbling, their lawyer’s reply was “Yes”, so  I am quite sure that Judge Green left his court fully aware that the Swiss verdict does not reflect the norms of British Competition Law. However, the rules simply do not allow him to take that simple fact into account.   Judge Green noted that our two arguments relating firstly to British Competition Law now being different from that of the EU, and secondly to the contention that the legality of the Authorised Service Networks has not been tested, had both been mentioned in the Swiss verdict. Because they had been mentioned, he felt that to allow us to argue them again would constitute re examining the Swiss case, and could not be allowed.   As to our claim that we were denied our right to be heard because our evidence was not considered, our lawyers had argued that the evidence we provided could not have been looked at because had the Swiss Court done so, it could not have reached the conclusion that it did. In his verdict, Judge Green highlighted general statements in the Swiss verdict that evidence had been looked at, and acknowledged the arguments we made to him, but again he considered that this was re-examining the Swiss verdict, and could not be permitted.   Our case has attracted considerable interest within the Legal community, and within minutes of the decision being made public we were approached for comment by one of the largest subscription news services, Global Competition Review. They asked us two very pertinent questions, and I reproduce them for you below along with our responses, as they neatly summarise the consequences arising from our case.   What are the key takeaways?   Enormous damage has been done to the fundamentals of UK and European Competition Law by the Swiss courts. It has always been the case that the effect on consumers and competition has to be considered in any decision making, but we now have a ruling that states even monopolists can remove wholesale markets from the supply chain without any consumer benefit based justification. Those entities looking to subvert Competition Law and exploit consumers for their own benefit will be looking at this very carefully.   Has the court made the wrong decision? If so, will you appeal?   The issue lies not with the High Court, but rather with cross border jurisdiction treaties that have no requirement in them for foreign jurisdictions applying UK law to take account of the Ratio Legis [a legal term for the fundamental reasoning why the law was written] of that law, and have no remedy within them for UK Courts to overcome decisions that clearly do not.    After eight years of work, and a very considerable sum in legal costs, I can not begin to tell you how disappointed I am at this outcome. For the time being, there is no further route through the British Courts that Cousins can follow. However, I promised that we would fight to the end, and that promise stands.   The UK is no longer part of the Lugano Convention, whose rules Judge Green has applied, and as yet nothing permanent has replaced it. The political tide turned against repair prevention by restricting supply of spare parts some time ago, and our efforts on behalf of the Watch Repair industry have resulted in high level contacts within several Government Departments. You can be sure that we will keep working to overcome this unjust situation that we now all find ourselves in.    I will keep you advised.   Kind regards   Anthony
    • Dell fancy a challenge🤣   https://www.ebay.co.uk/itm/285785684626?itmmeta=01HT29WVJY21Q94C73GYHGBTFX&hash=item428a277a92:g:15YAAOSwNRVmBAUz&itmprp=enc%3AAQAJAAAA0DIe4QLQBW66rSyIMiyBuk8GY%2B86pQ%2BQnxGbcNq7egAGe5DIs9YMmiWJIbZtMSxwNJIiJxuojbq523IeUSBQ6pJEIQ0tfz2ChrBR03BksmKINyklg1IK4GAfAcYY9Hta9wVeSZSZN7ZCNAfZTgKs9c4%2BUIUZ3Qjc3QjUXDn2uPRo1FiYOEewMG5A26EXb%2BclBgrqtbOmM6P3bea%2F8ZImOAXNI1HtbmtMk84pIGoM6ISwaM1PKFuADtTFMccS5e3ZjndCbXYXHrW3CecsV0edw3M%3D|tkp%3ABk9SR8q588nQYw Darwin’s theory of evolution has not been proven to be absolutely.  😀 
    • A already know the size movement I have the problem is the dial a had purchased has a dimension 20.6mm wide a want to find a watch case that going to fit the dial perfectly 
    • Hi.  I would like to take issue here regarding battery driven , watches, clocks,etc. I will and do repair these clocks in fact I have sever al in my collection as well as the regular mechanical ones. I have one on my mantle piece over 60 years old tha belonged to my wife’s Aunt,  long gone Iam afraid and it has been cleaned etc and never missed a beat and is accurate. Every one has their preduices as regards Electrical /electronic Horology but I regard it as part of the progress time line of the art of Horology and to be treated as such. Like Darwin’s theory of evolution it evolved.  Two cavemen knocking rocks together and a shard broke off , looking at it he worked out if it was stuck on the end of a stick he would have a spear. Likewise his pal seeing what he was up to picked up a piece  and did the same, now that’s evolution. Some clockmaker decided to build a clock that ran with a battery and no spring to wind up and break, progress and both the mechanical and battery driven clocks evolved, the battery ones got better to the point that if it broke you changed the complete unit. Likewise watches did the same but both can be repaired by people who approach Horology with an open mind without preduice.  We all have our likes and dislikes bu I for one would never dismiss any technology because I don’t like it.   The mobile phone is a good example of modern technology at work as is the automotive industry. There buttons and switches in my car I don’t use because to me they are not nesessary but I still drive the car.
    • I haven't gone through all the reading of what it might be or not. The first thing I would do if nothing obvious stands out is replace the mainspring, you have to start at the source of the power. Nine times out of ten that is the problem.  
×
×
  • Create New...