Jump to content

Create own watch from existing movement?


Recommended Posts

I've come across this online site that sell movements without the face or the dials or anything. It is the online shop for a physical shop that is close to me but I was wondering what is the reason behind selling these movements like this? Is it to build your own watch by choosing a face and the hands and all that or is it to practice with. Some clearer info would be appreciated

 

Untitled.png

Link to comment
Share on other sites

You could do that but in most cases its to replace an existing movement in a watch because quite often that is the most economical thing to do with quartz movements especially total replacement of the movement is often the cheapest and quickest option than expending the time and effort to fix an existing movement. 

Link to comment
Share on other sites

Most of these movements are quartz. When repairing a quartz watch, a new movement is often the most cost effective fix. The same can be true of inexpensive mechanical watches. That’s why most new bare movements are bought.
You could as you suggest build your own watch, and some folks will rescue a dead mechanical watch with a quartz movement.
Neil


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

Aaaah that makes more sense. The odds of finding the exact movement for the one you need might be a bit slim? I've also wondered about the watch balance wheel. Do they all differ depending on the movement they are being used in or are the more basic mechanical watches using a standard type of balance wheel?

Thanks for the info so far. I'm most likely going to asking questions as they come up.

Link to comment
Share on other sites

Aaaah that makes more sense. The odds of finding the exact movement for the one you need might be a bit slim? I've also wondered about the watch balance wheel. Do they all differ depending on the movement they are being used in or are the more basic mechanical watches using a standard type of balance wheel?
Thanks for the info so far. I'm most likely going to asking questions as they come up.
Interesting and I see where you're coming from but interchangeable parts does not denote cheapness, in fact it's the opposite. The initial set up of such machinery would be beyond the financial capabilities of most watchmakers.
Seiko enjoy a high degree of interchangeable parts including balance assemblies which is why they may be so popular with the watch repairer

Sent from my SM-T585 using Tapatalk

Link to comment
Share on other sites

11 hours ago, Neileg said:

Balance wheels aren’t really standardised but a dozen quartz movements might cover 90% of the watches you come across.

What diggingstony meant to say is simply that Seiko balances are interchangeable across 7S, 4R, 6R, 70x and may be even older movements. Indeed, a nice point for repairers and tinkerers.

  • Like 1
Link to comment
Share on other sites

What diggingstony meant to say is simply that Seiko balances are interchangeable across 7S, 4R, 6R, 70x and may be even older movements. Indeed, a nice point for repairers and tinkerers.

Yes I understood the point. All I meant was that quartz movements are less varied than mechanical watches (on the whole).
Neil


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I wish they would have done so in this case. The whole story went like this: I sent my speedmaster to an omega service center about 10 years ago (at that point of time I haven't even started watchmaking). After the watch came back to me it had only about 6 months wristtime until january 2024 (not fair for this nice watch but the other pieces of my collection want wristtime too 🙂). So my conclusion is that the barrel was already faulty when it came back from service, can't imagine that amount of wear in 6 months wristtime. In january 2024 the performance on the wrist was quite bad, so I decided to have a look by myself. I have to admit that I didn't check the barrel close enough as I thought it must be ok, couldn't have issues after official omega service. That was a mistake, I will learn from that. Follow the golden rule: Nothing is certain except death and taxes.
    • I am same as you oldhippy I won’t touch anything with a battery, I keep getting requests to but I just say I only do mechanical clocks, there are quite a few errors & omissions with the repair guide have a look at this. https://mb.nawcc.org/wiki/Encyclopedia-Subjects/Torsion-Clocks/Book:Horolovar-400-Day-Clock-Repair-Guide-10th-Edition-Errors-and-Updates
    • Nice experiment. As it will be no problem, please put a twice less mass (half of the two penies) and read the amplitude, will be interesting. I mean to determine what is the relation torque/amplitude.
    • parts touching that aren't supposed to touch definitely would cause an issue. there not supposed to be touching there supposed to be independent which means that @VWatchie is correct that the ratchet wheel has no effect on performance. so if the ratchet wheel in your particular case is touching that is definitely going to be an issue and needs to be addressed. did you know that the Swatch group service centers do not change mainsprings? Swatch group service centers have an infinite supply of spare parts so they just change the mainspring barrel the whole thing. Plus anything else the watchmaker doesn't like just gets replaced like anything related to the escapement they just replace the components because they can.
    • The pivots look OK. In this position, balance may rub on the pallet bridge, the roller table may rubb on the pallet fork, the bottom of roller table may rubb on the main plate, and on the tip of the screw that fixes the bottom endstone plate, the impulse jewel may rubb on guard pin, the rounded part of the pivot may rubb on the hole jewe too. Thiss all may be due to broken, missing or moved down endstone, or the plate with the stone has some dirt or other obsticle under it. But, sometimes different odd reasons can exist, like for example someone has changed the balance from a donnor movement. All the reasons are visible and must be checked. For beginning, remove the lever and it's bridge and do the free oscillations test.
×
×
  • Create New...