Jump to content

My watch collection


Winston

Recommended Posts

Hello!

Here is my watch collection :) I know it's nothing amazing for some of you but being a full-time 21 years old student I worked quite hard to have theses :P. Horology is really an amazing hobby and I can not wait to learn more!

From left to right:

-Festa pocket watch from the 50" I think. I got for 20$ from a watch market. The watch runs but my goal is to service it myself soon

-Casio F-91w the legend :P , it is my beater watch for when I work outside or on my car.

-Orient Bambino gen 2 version 2. An entry level automatic dress watch with a hacking and hand-winding movement and date complication on a leather strap.

-Orient Ray II an entry level dive watch with a hacking and hand-winding movement and day-date complication.

-Casio EF-527D-1AVEF, quartz chronograph with date complication.

20171103_034657.thumb.jpg.3bb2f21d133aa8e91c95d8528a4a647c.jpg

  • Like 4
Link to comment
Share on other sites

I'm not a big collector myself but have a few watches that I like and they are not necessarily expensive, I think collecting anything is the individual sentimental value first (for me at least) and for some, it's what's going in the market in term of history of the particular collection (it could be anything and not only collecting watches), but somehow after the few sentimental items people start with the more valuable items which are by default cost much more money, so I think collection is mixed of some watches (in our case) emotional value and other items with monetary value. I like the Bambino and in my experience with Casios, which I had two in the past. They have served me well (I've bought them new at the time) but the cases ended up falling apart because of cheap material I guess and the plastic just dried and fell apart like breadcrumbs. Also, it is possible that through the years you may sell some of your current collection and acquire other watches as your taste and knowledge develop. As for now enjoy it and don't feel bad about it.:)

Link to comment
Share on other sites

Thanks for sharing!!!

I place much more value on what I think of the watch vs what it actually is worth. If it looks nice, has a decent movement, runs well and fits my wrist properly so I can wear it, it's a collectible :)

Sure you could spend many many thousands on a watch, but if it ends up in a drawer or in a safe and never runs, and is never worn, what's the point.

Obviously, if you can afford it, I'm sure it's nice to have an expensive good looking watch on your wrist

Link to comment
Share on other sites

Collecting anything is a very personal thing, and those of us who collect watches usually have particular slants on the subject.

You can see my collection (well, most of it) at:

www.willswatchpages.com (site currently and slowly being edited)

I like pre1970, handwound styles on the whole, and some of the lesser-known and therefore overlooked, makes often have excellent movements. Many of them I picked up for a snip on eBay at the time.

As far as pocket watches are concerned, I favour American, railroad-grade makes like Hamilton, Waltham, etc.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Interesting!  I just got a JLC Memovox 3151, calibre P489/1. The amplitude drops by 70° from horizontal to vertical. Good to know that this isn't too unusual.  Btw, if anyone is ever searching: the lift angle on my P489/1 is 60° - as calibrated through visual (slow motion) inspection of the balance swing. This differs from the 40° lift angle found on various lists on the Internet. Makes a huge difference, obviously, in the timegrapher amplitude readings.  Cheers 
    • I'm new to the craft, but I have been using a neoprene mat (think a giant mousepad). It can get a bit dirty but nothing slides or bounces off it, it has stopped a few screws from bouncing off my desk into the abyss.
    • Have you looked here. https://moleroda.com/radial-wheels-for-cleaning-and-polishing/
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
    • The problem sounds very much like what might happen when failing to do the reset procedure. The stopwatch not working could be a few things.  There are two different motors, one for the center sweep seconds and one of the minute counter.  Damaging a coil is the most likely thing to do wrong when changing the battery, but that would likely just take out one of the two.  So "start" it wait and see if the minute counter doesn't tick over.  If that ticks, and you've done the reset procedure, it's probably damage to the sweep second coil. If neither works, then it could be the button contact is damaged.  It's a tiny bit of copper trace on the PCB that curls around the edge to make a circuit and it can break off.  There's a way to trigger the buttons from the small pads on the back of the movement, as well as check them with a multimeter, if you are familiar with one. But give this a try, pull the crown out to the second position and hold down button "B" (10 o'clock) for a few seconds.  This is suppose to spin the minute counter to let you reset it to 0.  If it doesn't move and (I assume) button 'A' (2 o'clock) doesn't start the chronograph, then either both buttons have failed at the same time or there is something else wrong. A leaking battery can take out the traces on the circuit board, and this can take out the motors and/or buttons, but you didn't say anything about it and it should be obvious if it leaked enough to do that.  
×
×
  • Create New...