Jump to content

What have I bought now!


Pip

Recommended Posts

I'm not even sure myself, but I saw a listing which said it's probably an old watch timing machine, but when I looked at the pics and the French labels I thought it looked more like a watch cleaning machine. It could be of course some cobbled together Heath Robinson affair. It could be of course a complete waste of money and not likely to ever work doing whatever it was built to do again. I'll know more when it arrives! But, I thought to myself, who better to ask than the hive mind here who have had every type of contraption imaginable in their workshops at one time or another. So your starter for 10 (and lots of conferring!)...

23923840348_075199e781_o_d.jpg

 

37518482280_c2b5fd615f_o_d.jpg

  • Like 1
Link to comment
Share on other sites

That was my thinking Mark, but I'm often wrong! The real trouble, and maybe the members can offer some advice here, is how the hell am I going to get this one in the house without the wife noticing? I think I may end up in that big box, under my patio.

  • Haha 1
Link to comment
Share on other sites

watch cleaning machine: ultrasound on/off button, wringer (dryer) on/timer/off buttons, big bottom dial is the timer.

Almost looks homemade. The attachments would be the agitators/motors to stir the solution. Do you have a better picture of the note inside the lid?

Link to comment
Share on other sites

watch cleaning machine: ultrasound on/off button, wringer (dryer) on/timer/off buttons, big bottom dial is the timer.
Almost looks homemade. The attachments would be the agitators/motors to stir the solution. Do you have a better picture of the note inside the lid?

Here we are...
f4e96cc1da10e66049d744623a62125d.jpg


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

watch cleaning machine: ultrasound on/off button, wringer (dryer) on/timer/off buttons, big bottom dial is the timer.
Almost looks homemade. The attachments would be the agitators/motors to stir the solution. Do you have a better picture of the note inside the lid?

Here we are...
f4e96cc1da10e66049d744623a62125d.jpg


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

Confirms it's a cleaning machine:
Average times for small watches/clocks:
12 minutes to wash
10 minutes to rinse
5 minutes to dry


Awesome. Just have to work out if it’s alive, of if not how to revive it, and then how to use it. I’m hoping there will be a manufacturer mark somewhere and I can find a manual. Someone on another forum mentioned vibrograf but I can’t find any pics that look anything like this thing.


Sent from my iPad using Tapatalk
Link to comment
Share on other sites

My word, it’s alive! Had to nip out and buy a travel plug (at work and couldn’t wait) but she powers up. There are three separate glass baths, and a spinning section which I guess is for drying, goes like the clappers when you press the right button. There are 3 what look like ultrasonic transducers with leads. Have to work out how/where to plug them in and need to pull it apart a little to follow the wiring and see if there is a makers mark on it anywhere. It’s a thing of beauty which I hope I can make useful again.
080ae9e1cb16c94a57c86b7d9670a8aa.jpg
3e2d327038e1b726a279e180cc72daef.jpg
a51f5d8887cb21815850229f57e0f401.jpg


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

I found a makers mark, it was made (or possibly distributed?) by a French company called Sepmis S.A. If anyone has any info on them or on the beast in the thread above, even if you've just seen a similar one, I'd love to hear from you!

Phil

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi all, I have a lovely Favre-Lueba dress watch from late 70s/early 80s in a stainless steel case.  Its an unusual curved rectangular case and crystal.  I'm wondering if there's any possibility I might be able to buy/find a replacement crystal for this watch.  The base of the crystal is also curved to match the case, rather than flat.  I'm looking at the Cousins website page here https://www.cousinsuk.com/product/rectsq-rounded-corners-one-side-curved-bezel-sternkreuz-rzr but not sure if I'm looking for the correct type.  In my case its a rectanglular crystal with rounded corners, and both the upper and lower surfaces of the crystal are curved. Many thanks
    • Getting more interesting this post, innit? Mikeplilk, Waggy. Impressed with your efforts. Makes mine look amateurish. Hey, that's what I am. Still, I have good results with the 'frog'. Apprentice test piece. Paper is from https://www.ebay.co.uk/itm/234602659940?var=534248554534   I am aware that the more I delve into the DIY, the more I am gaining understanding of watchmaking. Well, a little each time. Ross  
    • Now, that's a bad boy watch! 🫡
    • High frequency day: 36000 bph. 
    • I bought this box of jewels a few years ago and noticed that the glass containers are divided into two sections. In the first section, the containers have a label with red text colour and always start with the letter B. In the second section, the text on the label is black and lacks the letter B. There seem to be roughly the same number of containers in both sections, and each section has the same sizes of jewels. The only difference is that the jewels in the B section with red text have a slightly rounded, convex underside. My question is what are these rounded jewels for and if I can use them instead of the jewels with a flat bottom if a certain size is missing?
×
×
  • Create New...