Jump to content

My First Balance Staff - Need some advive

jdrichard

By jdrichard
in Watch Repairs Help & Advice

 Share

Recommended Posts

jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Before fitting the hairspring, always a good idea to check the balance wheel is running true. Riveting on these split balance wheels can lift an arm sometimes if your unlucky. And some minor adjustment to re-true the balance may be necessary

Sent from my SM-T585 using Tapatalk



Put it in a truing calliper and it looked good.


Sent from my iPhone using Tapatalk Pro
  • Like 2
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted
22 minutes ago, jdrichard said:
23 minutes ago, jdrichard said:


Put it in a truing calliper and it looked good.


Sent from my iPhone using Tapatalk Pro

The way to prevent any misalignments is to rotate the punch while you are tapping the balance wheel onto the new staff this will help the balance wheel to be re-seated correctly.   

 

Link to comment
Share on other sites
Tim Member

Tim

Posted
Posted

BTW, what kind of steel are you using and what type of gravers? You have to be careful with steel selection and avoid any that undergo work hardening. They sell something called "blued steel" at many places that is typically horrible stuff for what we are doing. Best bet is to get annealed O tool steel and do the gardening and tempering yourself. That way you know what you are getting. 

  • Like 1
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
BTW, what kind of steel are you using and what type of gravers? You have to be careful with steel selection and avoid any that undergo work hardening. They sell something called "blued steel" at many places that is typically horrible stuff for what we are doing. Best bet is to get annealed O tool steel and do the gardening and tempering yourself. That way you know what you are getting. 

I’ll need to find some annealed O Tool Steel. Do you have a reliable source


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
  • 2 weeks later...
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted

Update. Had to re-shellac the roller jewel, then i staked in on my new staff. I then aligned the hairspring with the balance cock and the pallet fork. I put the lot together and it started running right away: with exceptional amplitude. However as i completed tightening the balance cock, the balance stopped. Too long a pivot on the top of the screen staff. Tomorrow i shall Jacot the pivot and start the adjustments48aedcffd969c76f3f3b079a503d0bcd.jpg6cbd0acddd3c1b28430e8495cfbf8d42.jpg6651d8d0f452306bdcfb1d5f5bec77ad.jpg04c9128c1ae9763a67c5b950b3a9f258.jpg


Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
What you did ~works~ in an worker kind of way. If you blow a measurement on a staff, only solution is to start again. What you did would work on a clock, but centricity on a watch balance is too critical. By tightening the roller table in a staking set you've mangled the center and I'd be surprised if you got that thing even well poised. Like I said though, it will ~work~ but you've just forfeited precision and introduced positional timing variability. 

Worked and accurate


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Honestly, once you've manufactured and fitted your own working hairsprings there's going to be no limit to your possibilities. Very well done indeed

Sent from my SM-T585 using Tapatalk



Another adventure I’m sure:) I wouldn’t know where to start to manufacture a hair spring.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Honestly, once you've manufactured and fitted your own working hairsprings there's going to be no limit to your possibilities. Very well done indeed

Sent from my SM-T585 using Tapatalk



You said hairspring? Did you mean Balance Staff?


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
  • 2 weeks later...
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Down the rabbit hole!

      By RichardHarris123 · Posted

      Well done, let us know how you get on with the citizen. 
    • tomh207
      Without Our Forum

      By tomh207 · Posted

      @Neverenoughwatches Rich, I can only agree with you wholeheartedly. I spend a lot of time here learning all sorts and trying to make any little contribution to help others I can. Nothing can last forever and I wish I could do more to contribute to the forum financially and any other support I could.   Tom
    • oldhippy
      Without Our Forum

      By oldhippy · Posted

      This forum is a big part of my life. When I retired from horology many years ago due to poor health I missed what I had trained for. On here I can still do my bit in helping and advising others and have a little fun as well.  
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      First thing this morning, make coffee, second, check the forum.  I would really miss the forum, not on any social media, not interested in telling the world what I had for breakfast!!! I do consider most of the regulars friends and would wonder what had happened if they stopped posting. 
    • fnick
      Down the rabbit hole!

      By fnick · Posted

      Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
×
×
  • Create New...