Jump to content

My First Balance Staff - Need some advive


Recommended Posts

Before fitting the hairspring, always a good idea to check the balance wheel is running true. Riveting on these split balance wheels can lift an arm sometimes if your unlucky. And some minor adjustment to re-true the balance may be necessary

Sent from my SM-T585 using Tapatalk



Put it in a truing calliper and it looked good.


Sent from my iPhone using Tapatalk Pro
  • Like 2
Link to comment
Share on other sites

22 minutes ago, jdrichard said:
23 minutes ago, jdrichard said:


Put it in a truing calliper and it looked good.


Sent from my iPhone using Tapatalk Pro

The way to prevent any misalignments is to rotate the punch while you are tapping the balance wheel onto the new staff this will help the balance wheel to be re-seated correctly.   

 

Link to comment
Share on other sites

BTW, what kind of steel are you using and what type of gravers? You have to be careful with steel selection and avoid any that undergo work hardening. They sell something called "blued steel" at many places that is typically horrible stuff for what we are doing. Best bet is to get annealed O tool steel and do the gardening and tempering yourself. That way you know what you are getting. 

  • Like 1
Link to comment
Share on other sites

BTW, what kind of steel are you using and what type of gravers? You have to be careful with steel selection and avoid any that undergo work hardening. They sell something called "blued steel" at many places that is typically horrible stuff for what we are doing. Best bet is to get annealed O tool steel and do the gardening and tempering yourself. That way you know what you are getting. 

I’ll need to find some annealed O Tool Steel. Do you have a reliable source


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

  • 2 weeks later...

Update. Had to re-shellac the roller jewel, then i staked in on my new staff. I then aligned the hairspring with the balance cock and the pallet fork. I put the lot together and it started running right away: with exceptional amplitude. However as i completed tightening the balance cock, the balance stopped. Too long a pivot on the top of the screen staff. Tomorrow i shall Jacot the pivot and start the adjustments48aedcffd969c76f3f3b079a503d0bcd.jpg6cbd0acddd3c1b28430e8495cfbf8d42.jpg6651d8d0f452306bdcfb1d5f5bec77ad.jpg04c9128c1ae9763a67c5b950b3a9f258.jpg


Sent from my iPhone using Tapatalk Pro

Link to comment
Share on other sites

What you did ~works~ in an worker kind of way. If you blow a measurement on a staff, only solution is to start again. What you did would work on a clock, but centricity on a watch balance is too critical. By tightening the roller table in a staking set you've mangled the center and I'd be surprised if you got that thing even well poised. Like I said though, it will ~work~ but you've just forfeited precision and introduced positional timing variability. 

Worked and accurate


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

Honestly, once you've manufactured and fitted your own working hairsprings there's going to be no limit to your possibilities. Very well done indeed

Sent from my SM-T585 using Tapatalk



Another adventure I’m sure:) I wouldn’t know where to start to manufacture a hair spring.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

Honestly, once you've manufactured and fitted your own working hairsprings there's going to be no limit to your possibilities. Very well done indeed

Sent from my SM-T585 using Tapatalk



You said hairspring? Did you mean Balance Staff?


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

  • 2 weeks later...


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
    • Once a movement has the dial and hands put back and it is recased, would you expect the assembled watch to have the same amplitude as when the movement is in a movement holder and is without hands and dial? Thanks
    • C07641+ not sure what the "+" is for after the last digit.
×
×
  • Create New...