Jump to content

Cheap as chips.. CAMY Jet-King 908


anilv

Recommended Posts

Showing off my latest flea-market find. A Camy Jet King 908 from around the mid 70s I think. The 'speedometer' seconds hand is typical of watches from this time.

The seller wanted MYR80 (roughly USD20) but when I pointed out that it was not running (the seconds needle was as dead as a dodo) he came down to MYR70, claiming it was just serviced. I bought it anyway because the dial seemed good under the scratched up crystal and when I advanced the time the date advanced as it should. Below pics are after the crystal has been sanded and polished.

 

P_20171014_195623.thumb.jpg.14f3d922cc4c36d86aaf1a431404eb6f.jpg

The caseback has the typical Camy design.. I have another one where the central portion is the same but in gold (just like a Grand Seiko!).

P_20171014_195539.thumb.jpg.48d78a3e8393de3661fd9d49fe60f74b.jpg

The crown seems to be original and has six notches instead of fine lines, similar to Omega.

P_20171014_195730_1.thumb.jpg.2749053a998f25ae6e168a5aa10ba1c8.jpg

And inside is a FHF 67 movement. When I bought it I just stuffed it in my jeans pocket and when I got back I was pleased to see that it was ticking. Sometimes this is due to heat from your body thinning the old oils enough so that the watch can run. This usually means a service is in order. When I got home and opened it up however, I found a dial screw loose in the watch. On examination of the movement I found it was clean and running well so I just reinstalled the dial screw and tightened up the other dial screw (it was loose). Luckily the wayward screw did not get caught up in the hairspring. The movement was in pretty good shape, even the area around the crown release screw has been spared the butchering you usually see on older watches! The sellers claim that it has been serviced seems true and apart from the dial screw everything else seems in order.

P_20171014_195453.thumb.jpg.5e3778926a993d6b3d4f37474d4a6339.jpg

A quick polish of the crystal and some cleaning of the case and it's back together and on my wrist!

P_20171014_200929_1.thumb.jpg.04b136943a93c9cdea0dd663e8ab0412.jpg

have a good weekend guys!

Anilv

P_20171014_200754.jpg

P_20171014_200929_1.jpg

  • Like 4
Link to comment
Share on other sites

Showing off my latest flea-market find. A Camy Jet King 908 from around the mid 70s I think. The 'speedometer' seconds hand is typical of watches from this time.
The seller wanted MYR80 (roughly USD20) but when I pointed out that it was not running (the seconds needle was as dead as a dodo) he came down to MYR70, claiming it was just serviced. I bought it anyway because the dial seemed good under the scratched up crystal and when I advanced the time the date advanced as it should. Below pics are after the crystal has been sanded and polished.
 
P_20171014_195623.thumb.jpg.14f3d922cc4c36d86aaf1a431404eb6f.jpg
The caseback has the typical Camy design.. I have another one where the central portion is the same but in gold (just like a Grand Seiko!).
P_20171014_195539.thumb.jpg.48d78a3e8393de3661fd9d49fe60f74b.jpg
The crown seems to be original and has six notches instead of fine lines, similar to Omega.
P_20171014_195730_1.thumb.jpg.2749053a998f25ae6e168a5aa10ba1c8.jpg
And inside is a FHF 67 movement. When I bought it I just stuffed it in my jeans pocket and when I got back I was pleased to see that it was ticking. Sometimes this is due to heat from your body thinning the old oils enough so that the watch can run. This usually means a service is in order. When I got home and opened it up however, I found a dial screw loose in the watch. On examination of the movement I found it was clean and running well so I just reinstalled the dial screw and tightened up the other dial screw (it was loose). Luckily the wayward screw did not get caught up in the hairspring. The movement was in pretty good shape, even the area around the crown release screw has been spared the butchering you usually see on older watches! The sellers claim that it has been serviced seems true and apart from the dial screw everything else seems in order.
P_20171014_195453.thumb.jpg.5e3778926a993d6b3d4f37474d4a6339.jpg
A quick polish of the crystal and some cleaning of the case and it's back together and on my wrist!
P_20171014_200929_1.thumb.jpg.04b136943a93c9cdea0dd663e8ab0412.jpg
have a good weekend guys!
Anilv
P_20171014_200754.thumb.jpg.a10c7e6a872eaa867243676e3bc948b6.jpg
P_20171014_200929_1.thumb.jpg.0c4eb0bb391a27762829c5857ca508c1.jpg
Excellent watch, 'speedometer' nailed it on the head. Love those flea finds!

Sent from my SM-G920V using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So here is the new base (v 2.1), I made it so that the base will fit over and swallow the stump of the hand pusher tool (or at least my clone of the tool), I also reduced the OD of the bottom skirt a little as it looked/felt a little large, here are a few pictures and the fake .pdf file which you need to convert to .zip once downloaded.   The cut-out seen on the below image on the bottom of the base should swallow the OD (40 mm, +0.1 mm tolerance) of the stump and the height of the stump 9.5mm (measured to 9.1mm, but rounded to 9.5mm) - let me know if this works for your tool.   Note, I think you may need to print supports for the new internal shelf created? Modular Movement Holder.pdf  
    • Hi Frank, you have dived headlong into the deep end. Hairspring work has to be the scariest thing a newbie has to tackle. Your hairspring appears to be bent and just putting it back into the regulator would not allow the balance to work properly. It might start oscillating but the performance would not be good. The proper thing to do is to unstud the hairspring, remove the hairspring from the balance, reinstall the hairspring on the stud carrier, reshape the endcurve and centre the collet to the balance jewel hole. This challenge would either make you or break you. Hope that you will be able to fix your watch. Welcome to the world of watchmaking.  Watch this video. It think it'll give you an idea of the task ahead. From your 1st photo, I think you have a etachron type stud. Let me see if I can find a video on how to remove it from the arm.
    • Have read of the Tech Sheet attached on the balance section page 12. It may be bent but until you reposition it back in the regulator pins you'll never know. Cheers CJ 4R35B_4R36A.pdf
    • Aloha All, My Seiko 4R35B movement stopped working today. Upon closer inspection, it looks like the balance spring came out of the regulator pin. This is my first time working on a balance. Any advice on how to get this spring repositioned (back to normal)? I'm pretty sure that while adjusting the beat error on this movement, I must have turned the stud (I didn't even know they turned), and the spring eventually fell out.  Will the spring go back to even spacing when it's back in the pin, or does it look bent? Thanks, Frank  
    • Good job, that band matches the watch perfectly.
×
×
  • Create New...