Jump to content

Trench watch


Recommended Posts

I hear guys talking about "Trench Watches" so what is the draw? I have seen a couple in photos & thats all.

What are they , how do you tell real from fake, what should I look for when shopping for one, & not getting taken for a ride.

Any help & photos along with your experiences would be of great value to someone who is just thinking about sticking his toes in the trench watch (WATER)

Thanks

 

Edited by TimFitz
missed something
Link to comment
Share on other sites

"Trench watch" has become of a bit of a catch all term to describe wire lug watches made during the period of the 1914-18 war a true trench watch made specifically for military use or for the use of serving personnel has to be a luminous dial and hands type, water, dust resistant  in some way most notably Borgel cased watches and have either an unbreakable crystal or shrapnel guard to protect it anything else is just a wire lugged watch of the period although many serving personnel would have worn these as well they would not have been up to the riggers of trench warfare.

this is a excellent site packed with information on trench watches:

http://www.vintagewatchstraps.com/trenchwatches.php

Edited by wls1971
Link to comment
Share on other sites

One way of weeding out most "fake" trench watches (still very old watches but ones that most likely didn't see any action) is by ignoring watches that don't have the shrapnel guard as wls pointed out (although some could have had one and then it was broken or removed for various reasons...) and those that don't have markings on the back. Generally the authentic ones that were issued would have various extra markings.

Link to comment
Share on other sites

The term is used extensively on eBay - usually wrongly. As wls1971 quite rightly points out. It’s become a catch-all phrase for transition watches, where small pocket watches started to become wristwatches. Done to attract buyers, I guess.

Caveat emptor! B)

Link to comment
Share on other sites

Quite often women's watches from that period are also called trench watches and described as 'officers watches' as sellers think they will sell for more money if advertised that way.

This is not a hard and fast rule, but if the dial is less than 28mm or has gold decoration on it, it is probably a woman's watch, not a trench watch. Nothing wrong with collecting 1920s women's watches, I've got a couple which I have restored for my wife, with one of them being sold as an 'Officers Trench watch' which it obviously wasn't as it was a woman's watch and hallmarked 1922, but it was still a nice watch and I got it for a good price.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Never and others. Yes like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
    • Get someone local to tig it ,very easy fix and should only take a few minutes so probably wouldn’t cost much ,or failing that get it very clean and silver solder it. Dell
    • Hi, The winding pin is not split, well that's how it was when I obtained the watch. The movement is front-loaded and here's a picture of where the case screws are fitted. The face picture is before I dismantled it. Quick update.  I've always had a nylon ring sitting in the parts try that I wasn't sure where it went and left it to the last thing as I know it must be part of the case assembly. Anyway, looking at the picture in my last post you can see, just under the winding stem, a white-looking object, this is the nylon ring 🤭 So, I had to remove the dial again and replace the ring. Once this was all back together I placed the movement in the case and realized my initial problem maybe is not a problem as it looks like I can screw the movement back in the case and then place the hands as the dial is nearly flush with the outside of the case anyway so I'll be able to check for alignment. if all is good then just fit the crystal and bezel 🤔 I can't think of any issues with this approach but please comment if you think I've not thought of something. Another lesson learned as well. Take more pictures not just of the movement parts and location 😅
    • I dont think mine is. Its an idea to have them all in one place if possible, then a quick screenshot will have them saved. Unless anyone has any other ideas of how to reconnect 
    • My email address is in my profile, feel free all to drop me a quick hello. 
×
×
  • Create New...