Jump to content

Camera what do you use ?


Recommended Posts

I have of late been very busy getting round to all the watches I have put off for a while amongst them a Benrus miro rotor , eta 2671, Favre Leuba twinpower all worthy of recording. I would like to take a more active role in doing movement walkthroughs I currently have a Canon eos 5d with various lenses and a set of macro tubes, whilst this is a excellent camera it is of very bulky dimensions and needs to be used with a tripod to get the best result and requires a lot of setting up for each shot and just gets in the way.

What are current members using ? I would like ideally a compact camera point and shoot that has a excellent macro setting anyone recommend a camera

Link to comment
Share on other sites

I know exactly how you feel. I actually sold my Canon DSLR because it was just too bothersome to shoot, especially in macro setup.

I currently use a fairly old but decent Canon point and shot and I'm happy with it despite not having the most modern specs.

What is your budget ? I would gladly recommend Sony WX500 or HX90V. These are very good cameras but a bit pricey perhaps...

Link to comment
Share on other sites

1 hour ago, vinn3 said:

i use an endoscope.

I never even thought of that they look quite impressive on ebay do you use any particular one, I never used one but I have come into contact with one but it was being used by a doctor and inserted where the sun dont shine:startle:

I have a budget of £300-£400 

Link to comment
Share on other sites

  • 4 months later...

I've been using a Canon Stylus Tough model, which is a point and shoot but with manual overrides should you ever need them. It has a 4X optical zoom, and an excellent macro mode. What makes it outstanding for me is that its drop proof (to 2 meters) and waterproof (to 15 meters) , so not only does it serve excellently
for this hobby, where it resides on my bench, but also for fishing.

I photograph every step when taking apart a watch, and will even take a shot of every screw I've removed by placing it sideways over the place it came out of so I know which screw goes where when reassembling the movement. It's far better to take too many shots than too few as it costs nothing and may just really simplify reassembly. 

I've attached a shot of a small Incabloc so you can see its macro capability. 

I'm sure a lot of point and shoot cameras have similar macro features but few are as bullet proof as this camera.

P2084895.thumb.JPG.1346baf55660a8301b94661ad70ed317.JPG

  • Like 1
Link to comment
Share on other sites

I've a nikon slr D80 with macro lens I use, set up on a tripod so i can put the movement at the corner of the bench and an IR remote so I'm not touching anything.  The tripod is so I can do long exposures/high F stop shots so the depth of field is maximized.  I too photograph every step, it has saved me many times!  I've also made an adapter for that camera to go a trinocular stereo zoom for more magnification.  It works, but limited depth of field makes the results less than stunning.....I'd like to spend some time getting good at "stacking" and see what sort of images I can get.

one shot from the bench, one from the scope focused on a pallet pivot

 

8WJ1pRu.jpg

NNfoUcY.jpg

Edited by measuretwice
Link to comment
Share on other sites

On ‎9‎/‎24‎/‎2017 at 12:07 PM, wls1971 said:

I never even thought of that they look quite impressive on ebay do you use any particular one, I never used one but I have come into contact with one but it was being used by a doctor and inserted where the sun dont shine:startle:

I have a budget of £300-£400 

an endoscope IS a digital camera with its own light intensity adjustment and very high magnification (your dentist has one).  $50 U.S.A..  it works great and the size of a pencil.   the problem  for me is it needs to be connected to a computer,  find the program that runs it AND have a cable net connection.  i have taken film pix. thru all kinds of microscops [even electron scope] and just can't get use to didgital photagraphy.  vin p.s.  did the doctor give you "wallet size prints" ?

Link to comment
Share on other sites

Thank you all for the suggestions, The D5 is a good camera but when tripod mounted it just gets in the way once I start a job I dont like to constantly break off from it for minutes at a time so I will be buying a endoscope camera based on suggestion several people have made they are quite inexpensive and should not get in my way on the work bench.

Link to comment
Share on other sites

5 hours ago, wls1971 said:

Thank you all for the suggestions, The D5 is a good camera but when tripod mounted it just gets in the way once I start a job I dont like to constantly break off from it for minutes at a time so I will be buying a endoscope camera based on suggestion several people have made they are quite inexpensive and should not get in my way on the work bench.

good show,  the camera and cord will fit into an eye glass case.  vin

Link to comment
Share on other sites

  • 1 month later...

I've got a Olympus TG-4. It's got a "microscope" mode that allows really close shots. They seem very good.

I've not set up lighting on any of these - they are done either with background room lighting or a Ikea bendy led desk lamp.

I'm also hand holding the camera so that add shake. With a stand and proper lighting you could get some cracking shots.

 

 

P3270026.JPG

P4010009.JPG

P3230015.JPG

  • Like 2
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...