Jump to content

Rotating Bezel remover.

digginstony

By digginstony
in Tools & Equipment

 Share

Recommended Posts

jdm Distinguished Member

jdm

Posted
Posted
50 minutes ago, clockboy said:

The best way I have found to remove a bezel is with a old butter knife. It has a nice thin blade but is flexible so no damage to the bezel or case. Trusty butter knife/bezel remover

Try that on a Seiko Sumo, or even a 007 and you'll have it bent or in two parts. A flexible blade may not damage the case but it's also ineffective. Hard bezels are removed with a Seiko S-28x knife opener, (or a good copy), and the tip may need further sharpening. The large handle allows to pry correctly, remember that damage is done when twisting, but when you pull the tool handle up, the tip pushes on the case which is covered by the bezel, and the lower edge of the bezel, leaving no marks.

 

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
24 minutes ago, clockboy said:

I have used my butter knife method with Seiko divers, and also used it with my Rolex and Citizen bezels with no problems. Perhaps the Sumo is a different stye of bezel.

It's the same style, but much harder and inaccessible on the sides. If you could have a video removing an SKX007 bezel with a butter knife and no twisting, I'd love to see it.

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
12 hours ago, jdm said:

It's the same style, but much harder and inaccessible on the sides. If you could have a video removing an SKX007 bezel with a butter knife and no twisting, I'd love to see it.

Next time I get a diver or watch with a  bezel I will do. Watch this space !!!!

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
10 hours ago, clockboy said:

Next time I get a diver or watch with a  bezel I will do. Watch this space !!!!

Please try on a Seiko 007/9, which is the specific watch I was referring to. I agree that other types may be much easier to remove with improvised tools.

Link to comment
Share on other sites
digginstony Super WRT Addict

digginstony

Posted
  • Author
Posted

Ok I had a spare hour this afternoon so I thought I would have a go removing my Urchin bezel using a knife.
After about 20 minutes using a whole selection of kitchen knives and being totally red faced I hadn't made any progress (The Mrs won't be happy with me when she gets home from work and sees the knives either) I even taped the lugs and tried leverage and twisting, still no joy, so I gave up.
So I got the Horotec case grab out and removed the bezel in a couple of minutes. I don't reckon this tool to much as a case back remover but as a bezel remover, it's the BEST I've come across.
So insert the jaws apply tension, the bezel pops and gently lift up with no effort with a Seiko type case back remover. See pics e606e40bfd5a240ef5adaa134fe4ee8f.jpgea103fb03c65903b9d118e44c5065d79.jpg03b29f2631fc9b0e12ab4c11aa0df30d.jpg

Sent from my SM-G920F using Tapatalk

  • Like 1
  • Thanks 1
Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
4 hours ago, digginstony said:

So I got the Horotec case grab out and removed the bezel in a couple of minutes. I don't reckon this tool to much as a case back remover but as a bezel remover, it's the BEST I've come across.

That's heavy machinery! I have a Sumo which will need the bezel removed, and I would be much more relaxed with it. Will look on AliX for a knock-off :biggrin:

Link to comment
Share on other sites
digginstony Super WRT Addict

digginstony

Posted
  • Author
Posted
That's heavy machinery! I have a Sumo which will need the bezel removed, and I would be much more relaxed with it. Will look on AliX for a knock-off [emoji3]
From what you've said, this sort of tool could be ideal for a Sumo. I haven't been tinkering with wrist watches for that long, normally I play about with pocket watches but over the last year or so have certainly fallen for Seikos. This tool has been perfect for my skx,turtle and urchin.
As for using a knife, if there is a knack to it I certainly haven't got it. [emoji30]

Sent from my SM-T585 using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Down the rabbit hole!

      By RichardHarris123 · Posted

      Well done, let us know how you get on with the citizen. 
    • tomh207
      Without Our Forum

      By tomh207 · Posted

      @Neverenoughwatches Rich, I can only agree with you wholeheartedly. I spend a lot of time here learning all sorts and trying to make any little contribution to help others I can. Nothing can last forever and I wish I could do more to contribute to the forum financially and any other support I could.   Tom
    • oldhippy
      Without Our Forum

      By oldhippy · Posted

      This forum is a big part of my life. When I retired from horology many years ago due to poor health I missed what I had trained for. On here I can still do my bit in helping and advising others and have a little fun as well.  
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      First thing this morning, make coffee, second, check the forum.  I would really miss the forum, not on any social media, not interested in telling the world what I had for breakfast!!! I do consider most of the regulars friends and would wonder what had happened if they stopped posting. 
    • fnick
      Down the rabbit hole!

      By fnick · Posted

      Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
×
×
  • Create New...