Jump to content

BATTERY CHANGE

watchet

By watchet
in Watch Repairs Help & Advice

 Share

Recommended Posts

watchet New Member

watchet

Posted
Posted

Anyone out there know how to change battery on a QUINTING FABRIQUE  EN  SUISSE ?  The battery compartment is in outer said of back case, as I began to remove battery I could see what looks like a clear gasket but not sure has any one have experience with this watch?

  Thanks

001.jpg quinting.jpg

Link to comment
Share on other sites
wls1971 Distinguished Member

wls1971

Posted
Posted (edited)

I remember looking at these quite a few years ago they where and still are incredibly expensive watches  I think the watch contains 2 batterys or some of the movement photos I have seen show two and changing requires partial dismantling of the movement in some cases, its is a incredibly complicated movement I would not even think of replacing a battery on one myself so to answer your question take it to a authorised service agent and let them do it these retail at about £15,000 new and £7,000 secondhand why risk it if a battery change is £200.00 I would say money well spent on a watch like this,

Poor video quality but it gives you a idea of the movement

Edited by wls1971
  • Like 1
Link to comment
Share on other sites
Ishima Super WRT Addict

Ishima

Posted
Posted (edited)

Not something I've seen or heard about before. I routinely work on 4 figure watches but this is really something else, don't think I'd have even considered trying.

I will say it's a very interesting piece and just as a technician, on both a personal and professional level I'd love to be able to do...anything at all with this. My curiosity is peaked. But for better or for worse the cautious voice in me is the louder one, and it agrees with WLS.

Edited by Ishima
  • Like 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
On 25/08/2017 at 6:09 PM, watchet said:

Anyone out there know how to change battery on a QUINTING FABRIQUE  EN  SUISSE ?  The battery compartment is in outer said of back case, as I began to remove battery I could see what looks like a clear gasket but not sure has any one have experience with this watch?

  Thanks

001.jpg quinting.jpg

I have done some research and these watches are high end and seem complex in construction.
I would not change the battery or use any other repairer other than the manufacturer or a specialist. In my opinion it's not worth  the risk.

  • Thanks 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Rixy
      Broken lug

      By Rixy · Posted

      Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • rossjackson01
      Without Our Forum

      By rossjackson01 · Posted

      Never and others. Yes, like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. Clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
    • TheQuietMan
      Help please.

      By TheQuietMan · Posted

      Hi all, total newbie to watchmaking and I've had a bit of a mishap. Just completing level 2 and was doing ok, but I was just on the last part of the reassembly of my ST3620 when the balance end stone shot across the room, just as I was trying to see if I had put the correct amount of oil between it and the balance end, aarrrgh! Been on my hands and knees combing the carpet for 20mins looking for it but to no avail. Does anybody know where I can get a replacement from and what to look for please?? Thanks.
    • Dell
      Broken lug

      By Dell · Posted

      Get someone local to tig it ,very easy fix and should only take a few minutes so probably wouldn’t cost much ,or failing that get it very clean and silver solder it. Dell
    • Zedster
      Movement inserted from crytal side

      By Zedster · Posted

      Hi, The winding pin is not split, well that's how it was when I obtained the watch. The movement is front-loaded and here's a picture of where the case screws are fitted. The face picture is before I dismantled it. Quick update.  I've always had a nylon ring sitting in the parts try that I wasn't sure where it went and left it to the last thing as I know it must be part of the case assembly. Anyway, looking at the picture in my last post you can see, just under the winding stem, a white-looking object, this is the nylon ring 🤭 So, I had to remove the dial again and replace the ring. Once this was all back together I placed the movement in the case and realized my initial problem maybe is not a problem as it looks like I can screw the movement back in the case and then place the hands as the dial is nearly flush with the outside of the case anyway so I'll be able to check for alignment. if all is good then just fit the crystal and bezel 🤔 I can't think of any issues with this approach but please comment if you think I've not thought of something. Another lesson learned as well. Take more pictures not just of the movement parts and location 😅
×
×
  • Create New...