Jump to content

Unimat 3 Lathe

oldhippy

By oldhippy
in All Things Clocks

 Share

Recommended Posts

oldhippy Distinguished Member

oldhippy

Posted
Posted

I’ve just bought myself this Unimat 3 lathe with loads of add-ons including milling attachment est to have cost around £2000 the seller was asking £890 I made an offer of £750 which the seller has excepted. Many parts have not been out of there boxes and never used. I have been thinking over the past few days about starting some clock repairs as a hobby. My eyesight is not that good but I have been tinkering around with a few old movements and getting the feel of things and I am enjoying myself. When it arrives, I will take better pictures and I will be able to explain about all the extras.

Unimat 3.jpg

  • Like 4
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted

I had one years ago, so I know what they can do. One of the best mini lathes you can get, I don't know why their no longer being made. The picture is the one the seller used on  ebay, so your have to wate untill I have it for photos of better detail.

  • Like 1
Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
10 hours ago, oldhippy said:

 

 

I’ve just bought myself this Unimat 3 lathe with loads of add-ons including milling attachment est to have cost around £2000 the seller was asking £890 I made an offer of £750 which the seller has excepted. Many parts have not been out of there boxes and never used. I have been thinking over the past few days about starting some clock repairs as a hobby. My eyesight is not that good but I have been tinkering around with a few old movements and getting the feel of things and I am enjoying myself. When it arrives, I will take better pictures and I will be able to explain about all the extras.

 

Unimat 3.jpg

Out of retirement then. I guess you never lost the bug.

Link to comment
Share on other sites
FlyingWatchmaker Member

FlyingWatchmaker

Posted
Posted
I had one years ago, so I know what they can do. One of the best mini lathes you can get, I don't know why their no longer being made. The picture is the one the seller used on  ebay, so your have to wate untill I have it for photos of better detail.



I've got a very bare one, but a better unimat db? The earlier version... but love them both for different jobs...

I believe Emco were not financially viable in the early-mid 00's and started producing the sub-standard model with the plastic modules... they didn't last long after that.. I also had one of their bigger lathes for a while until I needed to make room for other toys ;-)

T
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted
45 minutes ago, clockboy said:

Out of retirement then. I guess you never lost the bug.

I think it has come back because of my involvement on here. I love helping out. So I blame this forum in helping me part with my hard earned cash. :D

  • Like 1
Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted

Great buy, I'm on the look out for one like that.

I have a large Chinese lathe, a watchmakers BTM lathe and a Sherline lathe that I 'purchased' for the price of the postage that I gave to my dad, but I'm looking for a good quality lathe that sits in between my BTM and my large Chinese lathe.

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted
8 hours ago, oldhippy said:

I think it has come back because of my involvement on here. I love helping out. So I blame this forum in helping me part with my hard earned cash. :D

 

I must admit this forum made me more serious with horology and yes I have now spent lots of cash.

:D:startle:

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted
3 hours ago, Tmuir said:

Great buy, I'm on the look out for one like that.

I have a large Chinese lathe, a watchmakers BTM lathe and a Sherline lathe that I 'purchased' for the price of the postage that I gave to my dad, but I'm looking for a good quality lathe that sits in between my BTM and my large Chinese lathe.

The Sherline lathe would be a bit too big for my space, besides I needed one with a milling attachment.

I have watch many videos on YouTube about Chinese lathes and there are so many bad reports, saying the finish is bad, plastic gear wheels and not being very accurate put me off.

Link to comment
Share on other sites
Tmuir Distinguished Member

Tmuir

Posted
Posted
21 hours ago, oldhippy said:

I have watch many videos on YouTube about Chinese lathes and there are so many bad reports, saying the finish is bad, plastic gear wheels and not being very accurate put me off.

My Chinese lathe is an AL50GB which has a 230mm x 500mm turning capacity, no plastic gears in it and the finish is ok for what I paid for it, but yes the tailstock is not very accurate, it is not perfectly parallel to the bed, it generally not a problem for most things and can be worked around. I would of much preferred a Myford, but my budget didn't stretch that far.

Its the usual story, 'You get what you pay for.'

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted

Have an old Unimat 3 that i have owned for maybe 40 years or more. Looks the same as yours. Could probably need some new bearings but it's working. I washed it in a bucket with water and then didn't think about removing the  bearings.  That was over 10 years ago. Still do some work on it from time to time. Did a caseback today. Removed the Seiko inscription and used it on a Candino watch. 

 

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
On 8/23/2017 at 11:50 AM, oldhippy said:

I 'm just going to have clock repairing and making parts as a hobby.

Oh, I see. Instead I like my hobbies to pay for themselves... So far I succeeded, excluding car tuning.

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
  • Author
Posted
40 minutes ago, jdm said:

Oh, I see. Instead I like my hobbies to pay for themselves... So far I succeeded, excluding car tuning.

I'll see how things go. The lathe turned up to day so have been having a good look at it and all the other bits and pieces. I thin I have done well. But there are still parts I need. Hope to put up some photos over the weekend.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Geotex
      Any tips to correct a sloppy error?

      By Geotex · Posted

      It's probably a cardinal rule for watch repair to never get distracted while at the bench. Yesterday, after finishing a tricky mainspring winding/barrel insertion (I didn't have a winder and arbor that fit very well) I mentally shifted down a gear once that hurdle was passed. There were other things going on in the room as I put the barrel and cover into the barrel closer and pressed to get that satisfying snap. But when I took it out I realized I never placed the arbor.  When opening a barrel, we are relying on the arbor to transfer a concentrically-distributed force right where it is needed at the internal center of the lid. However, when that isn't present it's difficult to apply pressure or get leverage considering the recessed position of the lid, the small holes in the barrel and the presence of the mainspring coils. It was a beat-up practice movement so I didn't take a lot of time to think it over and I pushed it out using a short right-angle dental probe placed in from the bottom, but that did leave a bit of a scratch and crease in the thin lid. I had also thought about pulling it using a course-threaded screw with a minor thread diameter smaller than the lid hole and a major diameter larger, but that may have done some damage as well.  Thinking about how this might have been handled had it been a more valuable movement, is there a method using watchmaking or other tools that should extract the lid with the least damage? 
    • Neverenoughwatches
      Epilame / Fixodrop

      By Neverenoughwatches · Posted

      🤔 what happens if lubrication is placed directly on top of epilame ? Making a small groove so the lubrication doesn't spread across the component but what if when lubing a little overspills and sits on the epilame .
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      Why just the bottom mike ? Is it worth polishing the whole arm ?
    • mikepilk
      Setting lever spring

      By mikepilk · Posted

      The one thing I took time over was to round and polish the curves at the bottom of the jumper arm. The slightest mark (left over from cutting of filing) acts as a stress raiser, just where you don't need it. 
    • GuyMontag
      Movement holder made with 3D printer

      By GuyMontag · Posted

      I printed the base and it is a bit too large to fit on the base of the hand setter. The ring bumps into the column so it is unable to full seat on the central ring. I'm going to try removing some of the materal and see if I can't get it to go down.
×
×
  • Create New...