Jump to content

Has anyone worked on a seiko 619-7071 case?


jnash

Recommended Posts

Have a weird one here. 

I'm sure im missing something as the glass does not fit.

I think im missing a crystal gasket but even the inner ring seems loose.  any one have any pics of the breakdown of the case or a manual? thanks in advice

it was together when i took it apart, but im thinking glue was involved to bodge it 

Thanks in advance!

J

IMG_20170529_173143.thumb.jpg.aadc378a58a71ffaf2ce4acb39a3f85a.jpg

IMG_20170529_173156.thumb.jpg.bed6c039f4a43ebf2e96f0cd0205346b.jpg

IMG_20170529_173244.thumb.jpg.0410b6159f0b3fce0a4ca99e00d30904.jpg

 

IMG_20170529_173904.jpg

Link to comment
Share on other sites

Does it rotate. Is there any small gears on the bezel. If so there should be a gear on the stem to. And maybe you are missing the thin spring that should sit over the inner bezel. A thin wavy washerlike spring. 

 

  • Like 1
Link to comment
Share on other sites

Nope, I've done 100s of Seiko's , this is a fixed inner bezel. Just wired pi's online don't really help and you can see with all of them that there is what looks like a gap !

Sent from my ONEPLUS A3003 using Tapatalk

Link to comment
Share on other sites

Yes. You have to remove the bezel to gain access to the crystal. Then you press the crystal out and the chapter ring will drop out. The crystal hold the chapter ring in. Check out the Seiko Watch forum at thewatchsite.com or google Seiko / citizen watch forum. Here you can download the Seiko casing guides


Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

I've done all of that, the problem is that everything is loose, I think something here is missing suck as a glass gasket etc?

Sent from my ONEPLUS A3003 using Tapatalk



Casing guide is your friend. Will show exploded view of case with all parts and gaskets


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites

There must be some sort of crystal gasket? Looked at jules borel and the gasket is a EC3340B04. That is in lots of seiko models. http://cgi.julesborel.com/cgi-bin/matcgi2?ref=io]H[DeEX

Other then that i see no thing that is missing. http://cgi.julesborel.com/cgi-bin/matcgi2?ref=SEK+CS%236139-7071&submit=Search

Edited by rogart63
Link to comment
Share on other sites

Thank you however as you can see, the seiko in question is in fact a chronograph (2 buttons , one crown) with a 6139 movement, therefore caliber 6139 and the case number is 7071.

It would be great to find a guide for it to put my mind at ease! - i have never had a issue with a seiko before!

 

 

Link to comment
Share on other sites

Hi,  I have a 6139-6002 which has chrono buttons and the case data shows F2-Screw2 for 6139-600 so I suspect your case is 707(1).  This then has case data as F3-Screw3.  

The F3 is the data for the glass fitting only (see page 13 on doc) and the Screw3 is the case assembly with all parts.  

My 6139 has chrono buttons but the case info fits so I can only assume that the chrono buttons do not affect the case assembly as such and that the extra digit brings in the chrono or other form of the basic case.

Hope this helps a little.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • This forum is a big part of my life. When I retired from horology many years ago due to poor health I missed what I had trained for. On here I can still do my bit in helping and advising others and have a little fun as well.  
    • First thing this morning, make coffee, second, check the forum.  I would really miss the forum, not on any social media, not interested in telling the world what I had for breakfast!!! I do consider most of the regulars friends and would wonder what had happened if they stopped posting. 
    • Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
    • Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
×
×
  • Create New...