Jump to content

Recommended Posts

Hi

I'm fooling with an old bulova and broke off a leg on the kif flector spring.

Anyone have a source for these ? Apparently they are made in three different sizes,  I have not determined which size I need but that's almost irrelevant due to not finding any for sale.

Maybe they are no longer available any thoughts ?

Link to comment
Share on other sites

 

Hi

I'm fooling with an old bulova and broke off a leg on the kif flector spring.

Anyone have a source for these ? Apparently they are made in three different sizes,  I have not determined which size I need but that's almost irrelevant due to not finding any for sale.

Maybe they are no longer available any thoughts ?

You should take a look at the reference 2 . But which size i don't remember? 2-2 or 2-3 or 2-4. 

kifchartnew1.thumb.jpg.9e0fe38f41f8b33bedf033e61ba984c9.jpg

 

Link to comment
Share on other sites

 

Rogart

Yes reference 2 is what I have. The question would be where can I buy them.

I don't care about the size I'll just buy all three then figure it out.

Thanks, Tom

You can buy them at cousinsuk. But they cost £10 for each package? 5 in each.  So they aren't cheap? Only think they have the 2-2 and 2-3 sizes . 

Maybe ofrei.com  is better for you? 

 

Here you have the sizes. Think you can order from boley.de also. 

https://www.boley.de/en/shop/5386.shock-protection-springs?acceptCookie=1

Edited by rogart63
Link to comment
Share on other sites

  • 4 years later...

Greetings, gents. I hope everyone's well and starting the new year on a high note.

I'm working on a small vintage Bulova (7 BUC) that utilizes the Kif Flector style shock protection. I haven't worked with them before and am wondering if i need to locate a special tool or whether I can fudge it with pegwood, screwdriver, old oiler, or? I see lots of Kif Trior tools but none for the Flector configuration.

Any help on working on those before I mess them up and/or lose them? Many thanks. Cheers.

MrR

Link to comment
Share on other sites

I only see Kif tools for the Trior type springs. Nothing for the Flector configuration. Does anyone make such a tool that can be purchased today? I'm trying to avoid losing the springs. It's a very small movement at 7.75 lignes (AS version).

If I could see an image of the end of the tool it would help me if I need to make one. Thanks ahead of time. Cheers.

Edited by MrRoundel
Add image comment
Link to comment
Share on other sites

On 2/1/2022 at 2:40 PM, Delgetti said:

Did this only on one watch so far and didnt use a special tool. Turned it anti-clockwise with a very fine tweezer end about 45 deg, then just fold it up like a inca. Didnt take it out.

Thanks, Delgetti. Before I read your post, a friend offered to lend me the special Kif tools that he had in his "kit". I made a minor error by not looking at the setup under higher magnification and before reading your post. The special tool really didn't seem to do a lot of good aside from denting the spring up a bit. On the second one I checked under my microscope and saw that these springs, as different as they look, aren't that difficult to deal with. Once I saw that the hinge side has its movement limited to the inside of the larger cutout in the rim of the setting, and the other side was the clip-in side, I used the tool to basically make sure that the spring didn't ping. I then used an old oiler to spin the spring around to the recess and remove. Yes, it's very much like the Inca in how it hinges, etc. Many thanks. Cheers.

 

Link to comment
Share on other sites

  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...