Jump to content

Antique Lathe -- thoughts?


PWR

Recommended Posts

 

My first thought is that it is a wheel cutter but I do not see a indexing plate. A antique for sure and eBay will be best for selling it. 

This is a Topping Tool.

The cutters are split and shaped in such a way that they self index to the next tooth by screw action.  The initial cutting of the teeth are usually made on on a lathe fitted with an index plate.  Once all the teeth are cut, the wheel is transferred to this "Topping Tool" for shaping the tops of the teeth.

PWR if I was you I'd sell it in a specialist auction or on eBay.  Going by the condition of the tool, you should get upwards of £1000.

Edited by Geo
  • Like 2
Link to comment
Share on other sites

If you don't want to sell it then keep it. Things like this can only increases in value.

 

You've still got a couple of years to catch up on me..............now what were we talking about???

The stroke I had didn't help. Geo I thought I was the oldest on here. :biggrin:

Link to comment
Share on other sites

 

Never really known any watchmaker to actually use these things... they usually end up sat in a cabinet -bought by non-watchmakers- as an ornament because they are shiny or look 'interesting'..

 

 

Actually my grandfather did use this!!!!   Of course that was 1930s into the 1950's......but there is no rust and little dust so perhaps my Dad did use it when I wasn't looking!

Link to comment
Share on other sites

 

Actually my grandfather did use this!!!!   Of course that was 1930s into the 1950's......but there is no rust and little dust so perhaps my Dad did use it when I wasn't looking!

In the past, making new parts was quite normal and taught in schools. Now even watchmakers with an high reputation when confronted with the need of turning an cutting a wheel won't do it. 

Link to comment
Share on other sites

  • 1 year later...

That looks like a ROUNDING UP TOOL.  Before modern motorized  high precision machinery was available to small shops, gear teeth would be cut and would not be concentric with the center hole of the gear. I suspect that watch repair shops did not even have electricity in those days, let alone machinery powered by motors. The cutters are actually rotary files with an offset guide to force the gear teeth into the cutter. The process is  similar to the way gear hobs cut gears  today. The gear hob cutter has the teeth positioned on a helix and the cutter forces its way through the gear blank with a threading action. Due to the way a hob cuts, indexing the gear blank to cut each tooth individually is not necessary.  

The cutters on a Rounding Up Tool  work the same way. A watch gear could actually have the teeth rough cut by hand with a saw and hand file  and then formed to the final shape with a  Rounding Up Tool. 

Here is a video of the tool in action:

https://youtu.be/Pej-FQBR1ss

david

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • that band is old as stated, there is a kit that pops up from time to time on selling sites for the repair of these type bands, some of this type are adjustable on a few links, one adjustable type allows you to align the round opening in the expansion slit [like yours] with the rivet to separate, but if yours won't come out then the rivet head is too big and will have to be done with some rivet removal and replacement, I suppose if you could make/optain the correct rivets that one could alter the said band, the tops/caps do lift off after raising the tabs....  
    • This is a watch from a friend who sent it to a neighborhood watchmaker for a battery change. It came back with the watch stem in a ziplock bag and the dial skewed 20°. The watchmaker told him that the stem was faulty and the watch cannot be repaired. I opened up the watch and found that one dial foot was broken off and still stuck in the movement, while the other was bent until it was flat against the dial. The stem could be inserted but it couldn't be pulled out to quickset and time adjusting positions. I did a full disassemble, cleaned and oiled the movement. But when it put in the battery, the second hand runs super fast. Like it gains 30 mins every hour. Any advice on fixing this problem? TIA.
    • I determined that the balance staff is rotating, not the roller table, so my second attempt at riveting was unsuccessful. I have ordered a new balance staff and will take measurements when it arrives. The balance staff i originally ordered (and now reordered) was specified as: Replacement balance staff: (A. Schild Caliber 984 1002 1021 1124 Original Balance Staff Part 723) so it should be correct. Measurements: (see pic below for terminology) xxxyy is a place holder until the new balance staff arrives. Lower pivot: Old - .08 mm New - xxxyy Lower pivot to balance seat: Old - 1.53 mm New - xxxyy Roller shoulder: Old - .42 mm New - xxxyy Hub: Old - xxxyy New - xxxyy Balance shoulder: Old - .86 mm New - xxxyy Collet shoulder: Old - .56 mm New - xxxyy Upper pivot: Old - broken New - xxxyy
    • Hello and welcome from Leeds.  We're here to help. 
    • I was just about to adk that, probably they have unnecessary waiting lists to make their watches appear more exclusive than they actually are.
×
×
  • Create New...