Jump to content

Sears Jump Hour: Cheap, unforgiving and absurd.


noirrac1j

Recommended Posts

How's everyone doing? Great I hope. Have some time to post a watch that I've been working on. I've learned from experience that the cheaper the watch, the more difficult it is to work on. Here is something from the 70's that represents well that kooky period. The watch measure 40mm x 38mm. The power comes from a one-jewel Bettlach 8800 with a jump hour mechanism on the dial side. An example of what makes this watch a nightmare to work on? For starters, you have to press down hard--and I mean with your body weight--on the stem release button to get it to release. The movement has what I think is a dust cover(why?), which when placed incorrectly causes the balance wheel to rub and stop--but only intermittently so that you go crazy trying to figure out what's happening... 

 

Its not me, its the WATCH!!

J

DSCN5244_tn.thumb.jpg.38b81fdd57ce0a77abd3d4710192ce35.jpgDSCN5081_tn.thumb.jpg.170983dcb97900e64134566571c24296.jpgDSCN5083_tn.thumb.jpg.8c5cc1220ad54caa7b351547341fb0bd.jpgDSCN5084_tn.thumb.jpg.404e4bc22ce77c14e99a451e1d320786.jpgDSCN5243_tn.thumb.jpg.0bf8d7e3aec978e70c07cc68144c112d.jpg

Edited by noirrac1j
  • Like 3
Link to comment
Share on other sites

 

Ooh, pretty on the outside but ugly on the inside.  At least you have yourself there a Swiss pin lever movement. ^_^

I think mechanical watches from back in the day are what lead to the saying "you get what you pay for".  

Yeah, it's a whole lot of chromed-shininess and not much substance! It is however, in excellent shape for being 40+ years, so it has that going for it.

J

  • Like 1
Link to comment
Share on other sites

I dread working on these movements. They have no jewels for the pivots so on the vintage movements the pivot holes are nearly always worn especially the pallet bridge. This makes it really difficult to get the movement to run smoothly. 

Link to comment
Share on other sites

 

I dread working on these movements. They have no jewels for the pivots so on the vintage movements the pivot holes are nearly always worn especially the pallet bridge. This makes it really difficult to get the movement to run smoothly. 

You've summed it up nicely. These things can be a tremendous hassle, but when they run, they do the job. 

Link to comment
Share on other sites

 

You've summed it up nicely. These things can be a tremendous hassle, but when they run, they do the job. 

Yep they do the job and surprisingly for many years. Just don't beat yourself up trying to get nice smooth readings on your timographer. 

Link to comment
Share on other sites

If the stem is that hard to move then put a little grease on the parts that touch each other, add a little oil to the stem, make sure you don’t have the wrong screws holding things together that might protrude and foul up the setting hands parts.  These old EB movements sure are bog standard, but a hell of a lot better than a ruddy Timex.

Link to comment
Share on other sites

 

If the stem is that hard to move then put a little grease on the parts that touch each other, add a little oil to the stem, make sure you don’t have the wrong screws holding things together that might protrude and foul up the setting hands parts.  These old EB movements sure are bog standard, but a hell of a lot better than a ruddy Timex.

 

Yes I put some Moebius KT gease and also lubricated the stem. Its not as bad as it used to be but still very stiff to release.

J

Link to comment
Share on other sites

I remember I had to kick one off the bench as its loud tick was too distracting,

Problem was they did not use jewels to save money, so they used plain holes. This in turn increased friction which required a more powerful spring. The powerful spring overcame the friction problem but led to faster wear if not serviced regularly.

Anilv

 

 

 

 

  • Like 1
Link to comment
Share on other sites

 

I remember I had to kick one off the bench as its loud tick was too distracting,

Problem was they did not use jewels to save money, so they used plain holes. This in turn increased friction which required a more powerful spring. The powerful spring overcame the friction problem but led to faster wear if not serviced regularly.

Anilv

 

 

 

 

Very loud ticking! Yes these are not meant to last that long, and yet here they are 50 years later!

JC

  • Like 1
Link to comment
Share on other sites

True Noirrac1J,

Also we have to acknowledge that Oris, which was one of the main proponents of the pin-lever (some even chronometer grade!), was one of the main forces behind the resurgence of the mechanical watch in the late 80s.

Also without Sicura (another pin-lever brand), we may not have Breitling with us now.

Anilv

 

  • Like 1
Link to comment
Share on other sites

 

True Noirrac1J,

Also we have to acknowledge that Oris, which was one of the main proponents of the pin-lever (some even chronometer grade!), was one of the main forces behind the resurgence of the mechanical watch in the late 80s.

Also without Sicura (another pin-lever brand), we may not have Breitling with us now.

Anilv

 

Right on both points!

J

Link to comment
Share on other sites

  • 3 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...