Jump to content

Here is a real beautiful clock


oldhippy

Recommended Posts

Here is a real beautiful clock made in England and it made its way to the U S A. It’s had its repairs but it’s a cracker, the dial looks as if it’s from a Longcase Clock but this is original. Plenty of photos so you can see the works and what goes on behind the dial.  Note how thin the steel work is for the wheels and the finish on parts, a sign of a good craftsman. A fine clock for anyone’s collection.

 

http://www.ebay.co.uk/itm/1840s-Striking-Fusee-Bracket-Clock-sold-in-Philadelphia-by-John-L-Lawson-/232343376052?hash=item3618be90b4:g:L6UAAOSw8lpZILtp

  • Like 1
Link to comment
Share on other sites

It is a very nice clock but must be somewhat of an odditty, to have a English made clock made specifically for the American market The seller states its from the 1840's what are your thought on the dating of the clock to me it looks to be from the early 1800's, An intresting feature of the painted dial is that the ship appears to be flying a Colonial ensign maybe a little dig by the dial painter that America was once a colonie ?

Link to comment
Share on other sites

 

It is a very nice clock but must be somewhat of an odditty, to have a English made clock made specifically for the American market The seller states its from the 1840's what are your thought on the dating of the clock to me it looks to be from the early 1800's, An intresting feature of the painted dial is that the ship appears to be flying a Colonial ensign maybe a little dig by the dial painter that America was once a colonie ?

It all fits in nicely about age, the name on the back of the dial gives the game away because the seller has given the history of when they were making dials and false plates for Longcase clocks.It is excepted to have a span of 5 to 7 years ether way in dating a clock, this is because London was the heart of clockmaking and it took time in other parts to catch up. It's not odd to have english clocks made for a different country, many have been made for countries such as China, India and France.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I missed this earlier. The dial isn't going into the holder, it should sit proud of it. This is what I am currently using which I print for each different movement.    
    • I didn't think pulling to set position would work harden the spring, in that position it is stressed where the arm starts. By work hardening i meant rapid polishing at that point, a bit like polishing a pivot work hardens as it compresses the steel. I doubt polishing by hand would achieve much in that respect though. Its finished, arm polished up mostly at the join to the bridge's main body. I'm ok with it, the screw holes aren't great as i had to open them up by redrilling and positioning it was difficult, I'm not much use with a loupe, opening up with a file might be a better option for me or i could just use the correct drill size 😅. And the detent is way too deep, i had to guess that with the stem release out of position and sat on top, but i only took one measure and went for it, no slowly slowly catch your monkey 😅. First go I'm happy , well sort of, it works and thats a big thing for me, next one will have a bit more finesse.  Anyone thats interested, after filing, i used a 2000 grade home made diamond  micro file and then 20 micron film, the film is much better than wet and dry, more stable to use and doesn't shed cheap grade grit everywhere , then auto polish on a sponge pad.
    • I'm assuming that every time you set the watch you are work hardening the detent spring, maximum hardening is  where it meets the plate due to maximum deflection.   That's why it snaps there.  The Young's modulus may be the same but after it's reached its maximum yeid strength it breaks.  My mechanic engineering is very rusty, correct me if I'm wrong. 
    • Ah ok yes that makes sense to polish it where the arm starts to form from the body of the bridge, i thought you meant the underneath of all the arm.
    • this is something I've never quite understood about the some of the Swiss companies. In 1957 Omega was using 9010 for the keyless parts with epilam. there's been a slow migration towards using heavier lubrication's but still typically oils and epilam to keep them in place. When it seems like 9504 works so much better.  
×
×
  • Create New...