Jump to content

Pig nose or snake eyes or spanner driver help


Danh

Recommended Posts

Hi guys

looking for someone to point me in the direction of tools.

i can not find the sizes of the pig nose screw drivers for watches.

i could just be the search terms I am using from the UK

the description would be 2 holes in the screw head

many thanks 

dan 

Link to comment
Share on other sites

4 minutes ago, Danh said:

Hi guys

looking for someone to point me in the direction of tools.

i can not find the sizes of the pig nose screw drivers for watches.

i could just be the search terms I am using from the UK

the description would be 2 holes in the screw head

many thanks 

dan 

I've never seen screw heads with anything other than slotted screws in Swiss watch movements, although Philips head screws are used in watchcases and Seiko. Maybe this will help?

J

58fb6355702cb_ScreenShot2017-04-22at10_04_26AM.thumb.png.f9b60b108958af6f4c22ca6c84b542f0.png

  • Like 3
Link to comment
Share on other sites

What is the spacing of the holes Dan?

I don't know where you'll find the "right" tool, but there are a number of options...

Searching for TH3 security screwdriver will get you 3.35mm between the outer edges of the holes. TH4 is 4.45

You could try a pair of mini circlip pliers, or a pair of dividers.

You could make your own - take a sort strip of steel, bend over one end and file a slot then round the edges to make 2 pins. Or if you wanted to take the crude approach, 2 tapered clock pins cut to fit snugly in each hole and a pair of pliers.

 

  • Like 2
Link to comment
Share on other sites

  • 1 year later...
13 minutes ago, gill1967 said:

I'm in the same boat, Off to B&Q tomorrow for 0.7mm drill bits, A great bit of advice/ work around.

Since then I have also made / converted a set of needle nose jewellers pliers 

I can not remember the movement - sorry

Link to comment
Share on other sites

On ‎4‎/‎22‎/‎2017 at 1:13 PM, StuartBaker104 said:

What is the spacing of the holes Dan?

I don't know where you'll find the "right" tool, but there are a number of options...

Searching for TH3 security screwdriver will get you 3.35mm between the outer edges of the holes. TH4 is 4.45

You could try a pair of mini circlip pliers, or a pair of dividers.

You could make your own - take a sort strip of steel, bend over one end and file a slot then round the edges to make 2 pins. Or if you wanted to take the crude approach, 2 tapered clock pins cut to fit snugly in each hole and a pair of pliers.

 

   there are taper pin stock for pocket watch hinges - about 2 inch long.  vin

Link to comment
Share on other sites

As StuartBaker104 pointed out a similar thread seems to be going on at two places.
I usually use tweezers to unwind the two hole nut in these movements, but for those who isn't comfortable to do so I just tried out another solution. 
Since these nuts appear in movements of different ligne, the distance between the holes will differ. It probably will do between manufacturers too.
The simple solution is to buy a small divider and modify the tips, make the tips flat instead of pointy. This will make them less likely to slipp. Now you have a tool like "one size fits all".
 

Divider.jpg

Divider2.jpg

Divider3.jpg

  • Like 3
Link to comment
Share on other sites

1 hour ago, HSL said:

The simple solution is to buy a small divider and modify the tips, make the tips flat instead of pointy. This will make them less likely to slipp. Now you have a tool like "one size fits all".

... now why didn't I think of that. By far and away the best suggestion.  Give that man a medal at once. :D

  • Like 2
Link to comment
Share on other sites

11 hours ago, HSL said:

As StuartBaker104 pointed out a similar thread seems to be going on at two places.
I usually use tweezers to unwind the two hole nut in these movements, but for those who isn't comfortable to do so I just tried out another solution. 
Since these nuts appear in movements of different ligne, the distance between the holes will differ. It probably will do between manufacturers too.
The simple solution is to buy a small divider and modify the tips, make the tips flat instead of pointy. This will make them less likely to slipp. Now you have a tool like "one size fits all".
 

Excellent - the dividers was one of my suggestions above, but pleased to see it works in practice :-).  I'm sure I have some of those somewhere, so I know where I'll be keeping them when I track them down.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Getting back to the issue which is us guys repairing or just enjoying horological exploits. The big worry now is how sound is Cousins as company going forward. The of cost if this 8 year legal battle will be astronomical. Cut backs will happen noticed already how the Cousins catalogue is half its size this year. The main supplier going out of business will hit the UK horological community in a big way.    On the Brexit issue it was about a sovereign country being able to make its own laws and trade with any country in the world. I cannot see what was wrong with this. For those who wish to re join the cost would be very high indeed.
    • Yes, it's the same (old) song and it's getting worse & worse;  
    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
×
×
  • Create New...