Jump to content

Pins how many types and is there a chart?

Andrewolf79
 Share

Recommended Posts

Andrewolf79 New Member

Andrewolf79

Posted
Posted

Hi everyone i'm new on this forum , and to the world of horology, so all help & tips are welcome in learning and understanding how to solve some of the problems i come across..   so i apologise in advance if some of the question i will post will seem "childish" to you.

 

I have a SECTOR no limits Watch ( well known cheap Italian brand ) i decided to open and do a battery change... I found out that who ever serviced it before bent the case pin or at least did not replaced it with a new one as i was told was part of the full service. < Battery replacement, seals replacement and pressure testing >

 

My issue is finding out what pin it is and where to order one.

I have seen a few types over the net and in a few net shops but none like this.

Is it an exclusive to the make? Can i replace it with another of a different type and witch one would suit best?

 

Thanks for all help and suggestions... 

IMAG3255.thumb.jpg.deeb17eb9fcb0a6ad3fb46182b4c3304.jpgIMAG3254.thumb.jpg.1d5c896dad3a09654fb7cc5c6a7e7621.jpgIMAG3256.thumb.jpg.6f979d22cc7caf1f178c2067b47ef08d.jpg

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted
32 minutes ago, Andrewolf79 said:

 

I have seen a few types over the net and in a few net shops but none like this.

Is it an exclusive to the make? Can i replace it with another of a different type and witch one would suit best?

You can replace it with a split pin or (with the right dies) make the creases in a straight pin.

But in practice in most cases for bracelet pins it's enough to straighten them manually in order to reduce the play. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HectorLooi
      Without Our Forum

      By HectorLooi · Posted

      Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Neverenoughwatches
      Gamblin Gamsol for cleaning?

      By Neverenoughwatches · Posted

      Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • GuyMontag
      What tools does ebay have to offer this week.

      By GuyMontag · Posted

      I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
    • GuyMontag
      Movement inserted from crytal side

      By GuyMontag · Posted

      Is the Roamer not a split stem? I'm confused on your how your case is put together. If it is a front loader where is it you are putting the case screws? I love me some Roamer, do you have any photos?
×
×
  • Create New...