Jump to content

Stupid question!


Recommended Posts

Hi,

This is my first post, hopefully not my last!

I have a Seiko Seahorse 'Waterproof Diashock 17 jewels' that I recently got up and running - "left in a cupboard for 20 years", but I don't think it's quite right.... it runs perfectly well and I can set the time with two notches out on the crown, but...

Shouldn't the crown rest flush with the body of the watch and should I be able to set the date separately to the hour/minute setting?

The watch looks and runs great but it doesn't feel right, or am I looking for functions that don't exist?

Any help would be appreciated,

Thanks in advance.

Link to comment
Share on other sites

Most Seiko,s the first position out is for setting the date and the second position out is for setting the hands. The crown should be flush with the case after settings are completed. Some are push fit and some are screw down crowns.

Link to comment
Share on other sites

Is it definitely two clicks on crown?
Seahorse I know use a 7625 movement which, according to my sources, is only one click. Date is set by moving past midnight until it changes then back to 9pm then again past midnight etc.

Sent from my Honor 5c

Link to comment
Share on other sites

2 hours ago, clockboy said:

If "Plato" goes to this web site http://www.seiko.co.uk/customer-support/support/instruction-booklets

& enters the caliber in the search box he can download the instruction manual.

Not sure if the early Calibres are in that link.

Plato - there should be 2 four digit numbers on the bottom of the dial, e.g. 6608-8010.

The first is the calibre number, which should also be on the movement and the second the case number.

From the calibre number we should be able to find if this has a quickset date, but I would suspect it doesn't.

Photos are also helpful!

Link to comment
Share on other sites

Thanks all for your interest, the full model number is 6602-8990. I did try the Seiko link originally but I couldn't find it there or online generally... all I can see is that the crown on similar watches seem flush but others don't? It's not a 'screw down' and I don't think it has any dirt in the way (I removed the movement to replace the crystal).

I'll add some photos as soon as I get to it on the weekend. I'd rather not do any work on it if there's nothing wrong... I have other watches to practice on first... I'm very new to horology so excuse my ignorance too!

Link to comment
Share on other sites

6602 doesn't have a quickset date, so you have to wind past midnight to 2 or 3 am, then back to 9 or 10 pm, then forward again to set the date.

It's possible that the stem is not installed correctly in the movement. Try pressing down the release button to remove and re-installing it.

Link to comment
Share on other sites

Thank you both again for your assistance.

The wrong stem seems to be most likely as I have tried reinstalling it again with release button fully depressed. I was quite happy with the experience gained from replacing the crystal but getting the stem right will be good practice too!

I have another Seiko (an automatic 7005B, I think) that I'm certain that just needs a strip down and service to get right so I'll get stuck into that one first.

All the best,

Geraint.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...