Jump to content

Tweezers advice?


Recommended Posts

I texture the inside of my tweezers with emery paper, 500 grit? i forget exactly, on the finer side but c.o.a.r.s.e enough that you can still feel the grit with your fingers. Just place the paper inbetween, close the tweezers and pull, fold it to do both sides at once. 

Edited by Ishima
  • Like 1
Link to comment
Share on other sites

Carbon steel tweezers can be glass-hard. My stainless Dumonts are softer and still get magnetised slightly anyway. I also have their "Dumostar" versions which are very hard, to be fair. 
As already mentioned, dressing them is very important, including giving the insides a slightly co**BLEEP** finish to provide grip. 

I suspect your Dumostar may have a higher nickle content to achieve their hardness. As previously mentioned, EN21 steel retains flexibility or to be more precise elasticity but derives strength through its nickle content

Sent from my SM-T585 using Tapatalk

Link to comment
Share on other sites

Love my Dumont carbon No.1s but the **BLEEP** things are sooo magnetised. I have half the **BLEEP** watch hanging off of them. I really must get a demagnetizer....:angry: My stainless Supras are nice though...nice and light. Really must get a set of brass ones though. Have a set of Dumont No, 5 in stainless but have not used them yet so can't comment on them.

Why in the heck can't we say c.o.u.r.s.e.??? or b.l.o.o.d.y....

Ron

Edited by 94marconi
spelling
Link to comment
Share on other sites

@RyMoeller Since electronics are also in my hobby spectrum, I knew these tweezers are anti-static & anti-magnetic Stainless Steel. They don't come with a watch-brand printed on them, perhaps hence the cheap price?

IMHO, they work great !

http://www.ebay.co.uk/itm/6pcs-ESD-Anti-Static-Stainless-Steel-Pointed-Tweezers-for-Repair-Tool-/272088601890?hash=item3f59be9522

ESD-11 is, together to my brass tweezers, the workhorse.

Edited by Endeavor
  • Like 1
Link to comment
Share on other sites

  • 10 months later...

Three 3c seems to be very popular with a lot of people and I prefer number 2 for watch work. So tweezers I use are made by Fontax and they're called Taxal nonmagnetic. There are actually very interesting how they're made casual observance they look like normal tweezers careful observance you'll notice that the tips are made out of a different material. Normally anti-magnetic is soft these are not whatever the alloy is is almost indestructible. Then unfortunately I've seen the modern version and they changed the shape slightly I don't like them. This represents one of the problems of there's no universal standard for numbers of the tweezers various manufacturers have slightly different interpretations.

Link to comment
Share on other sites

Still have not done any real work yet, but have been practicing picking up parts and dressing tweezers, etc.

 

One thing I did discover early on is that your hand size can make a difference to which tweezers work best.

 

I have large palms that just swallow up many tweezer sizes, so the longer ones work better for me, at least for general work. AA and SS, for example. For finer work like hairsprings you just have to manage with what is available.

 

I find that the SS tips can cross a bit easily compared to the more robust AA. Might just need more practice. But I did slim my AA tips down a little finer and that seems a good compromise.

 

Also slimmed the shoulders of the AA, more like the 3, so I can more easily roll the tweezers in my hand.

Link to comment
Share on other sites

My favourites are Dumont dumoxel #2 for most work then #5 for hairsprings.

I bought a set of Vetus tweezers from Cousins to get a range of shapes and sizes, but there is a reason why the Dumont ones are nearly 10x the price and I tend to just use these for odd jobs. Good tweezers feel like an extension of your hands. Cheap ones are an obstacle to learning to use them and you will regret the difference in price the first time you ping a part across the room.

I’ve also picked up some used oddments from eBay: Fontax #4, good for fine work; Fontax F, which have polished tips for handling hands; and Dumont carbon steel #7, useful to use with the #5 for hairsprings. I have also seen a lot of abused tweezers which have gone for high prices on eBay.

 

 

Link to comment
Share on other sites

1 minute ago, StuartBaker104 said:

I bought a set of Vetus tweezers from Cousins to get a range of shapes and sizes, but there is a reason why the Dumont ones are nearly 10x the price and I tend to just use these for odd jobs. Good tweezers feel like an extension of your hands. Cheap ones are an obstacle to learning to use them and you will regret the difference in price the first time you ping a part across the room.

I use Vetus tweezers and have absolutely no problem with them. It's the person and his/her dexterity that does the job, not the tool.

Link to comment
Share on other sites

9 minutes ago, jdm said:

I use Vetus tweezers and have absolutely no problem with them. It's the person and his/her dexterity that does the job, not the tool.

Well yes - this is sadly true, but lacking the experience, I find the Dumonts much easier to work with. :)

I’m assuming you are talking about the Vetus ones that cost about £4 a set? Be interested to know what yours were like straight out of the packet?  Mine needed a lot of work to get the tips to anywhere near the finish of the Dumont ones.

 

Link to comment
Share on other sites

3 minutes ago, StuartBaker104 said:

I’m assuming you are talking about the Vetus ones that cost about £4 a set? Be interested to know what yours were like straight out of the packet? 

Yes, I think so. I did nothing to them, I just try to grab parts as logic and physics dictates. I don't expect the tool to make any miracle and in return for a good service I do not abuse it.

I have bought some more tweezers from a now defunct domestic maker, but haven't even tried them. 

Link to comment
Share on other sites

  • 2 months later...

I have a ladies, very small, (No model number on it) Sekonda wind up watch that needs some work attending to on the hairspring.

This obviously represents quite a challenge and, without really good, fine tweezers, I think there's no hope of (Hopefully) getting this watch back in use.

I use a stereo microscope and when I view the tweezers that I have, they look like a garden shovel; compared to the hairspring!

Can anyone recommend any reasonably priced tweezers and where to buy?

I know there are plenty available, but they are way too cost prohibitive.

 

 

Link to comment
Share on other sites

  • 2 weeks later...
  • 2 months later...

I also have a "fake" pair of Vetus tweezers, and after putting them through the "ringer" of completely refining the tips, they work nearly as well as my trusty "ZEE brand medical tweezers that I currently use for EVERYTHING, including installing crown tubes!

Since I don't like to rely on only one of any critical tool, I'm currently mid-search to see if other brands (Such as Stella) are good, or if I should just bite the bullet and get Dumont tweezers. Honestly, it's second (maybe) only to screwdrivers with regards to how often they are used so I guess I'm answering my own question regarding: "Should I just get Dumonts..."

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Heres my watch of today, a Smith 13'" RY . My missus bought me this for this Valentines day a bargain 14.99 with a reduction, the seller has occasional 20% off offers now and then so it was about 15ish with delivery. I love Smiths and i love bulleye dials, this is my first one. The watch arrived non working as stated and i knew what was inside and what would be against me, but i enjoy a challenge, we dont expect a lot if anything from pin pallet movements. A balance pivot was broken and i didnt have another staff but i did have another RY with a battered dial so i robbed the balance and tweaked it around to make it work apart from that mostly just a good clean and relubrication. Keyless works are pretty rough by design and the crown is a bugger to get in and out with the dial on, the setting lever hits the dial before it releases it, so a little mod is needed to help that along. Major problem was the pins on the lever were quite worn which make the old tg have a snow storm fit. Its a similar read for most pin pallets, these were brass as was the escape wheel. But perseverance is me, i didn't change the pins but i did spend some time dressing and polishing the worn areas which improved the trace a lot with some straightish lines 😅 and a beat error of .5 . Not sure what the lift angle should be on these and i Wasn't in the mood to work it out and who believes timegraphers anyway, but at the default 52° it runs with 260ish full 210 after 24 hours dial down , the verticals rates were pretty much all over place. So lets just put it in it's superlight aluminium case and see what happens. Been wearing it now for 3 weeks and it's consistently losing around 1.5  minutes a week winding each morning i think pretty good for an old pin pallet watch. I just love this dial, thanks wifey heres my Valentine's gift for yer sweetie x
    • I have a PDF below that will help. The problem was the PDF wasn't designed for this purpose it was designed to tell you what size watch you  have. Then it doesn't take into account movements come conceivably in different thicknesses.   watch-ligne-size-chart.pdf
    • That would be something! Which brings me back to;  
    • you think you're going to sleep tonight you're not, you're going to ponder the question of what makes you think those of the right parts?  
    • Does anyone knows what size case a need for a dial diameter 20.60mm?
×
×
  • Create New...