Jump to content

Tweezers advice?


Recommended Posts

I still haven't purchase the carbon fibre ones to try. Currently I use stainless steel for the screws, wheels , springs etc., and a set of stiff plastic ones with a broad but thin tip for lifting bridges. Even brass can mark the soft copper plating on some movements if you inadvertently slip.

Link to comment
Share on other sites

The horotec carbon fiber I got doesn't feel "springy" in the hand and I don't like the feeling nevertheless, I bought them to handle hands and for that, they do amazingly well and no scratch on the lume. I got some other from cousins so I'll be testing them shortly and report back.

 

Cheers,

 

Bob

  • Like 1
Link to comment
Share on other sites

  • 2 months later...

I have tried many tweezers of different makes but have been using Dumont for a while now & have been very pleased with them. No.2 for normal work & 5,s for finer work.

I found the cheaper tweezers were OK but I seemed to be re-dressing them on regular basis but the Dumont just keep their shape. 

Link to comment
Share on other sites

Good set of tweezers that don't break the bank?
Sorry, but no such animal exists.

 

Cheap tweezers aren't good, and good tweezers aren't cheap.

 

I only use one pair of tweezers for everything; except hairsprings of course ... a pair of Gold Plated Brass Dumont #4's that I've custom shaped just the way I like them.

 

post-246-0-28411300-1430608366_thumb.jpg

 

Brass tweezers don't ping parts like steel, never become magnetized, have a lovely soft free, and I never have to worry about marking parts with them.

I've been using them 8hrs a day, 5 days a week for 7months, and at the most I have to give them a light dressing once a week.

... I will cry when they are worn out :(, and they will receive a royal burial with full military honours.

  • Like 4
Link to comment
Share on other sites

I only use one pair of tweezers for everything; except hairsprings of course ... a pair of Gold Plated Brass Dumont #4's that I've custom shaped just the way I like them.

 

 

Lawson, I was so impressed that instead of clicking on 'like', I searched the web for a gold plated Dumont brass Nr. 4. It doesn't appear to be anymore available. So I have whittled down a brass Nr. 5 and have almost perfected the tips. Here it is before final dressing and gold plating.

 

post-374-0-60082900-1430934295.jpg

Edited by cdjswiss
  • Like 4
Link to comment
Share on other sites

Lawson, I was so impressed that instead of clicking on 'like', I searched the web for a gold plated Dumont brass Nr. 4. It doesn't appear to be anymore available. So I have whittled down a brass Nr. 5 and have almost perfected the tips. Here it is before final dressing and gold plating.

 

Nice work CDJ.

There's nothing like customizing your tweezers so they are just the way you like them. 

Yes, it takes a little time to develop the skills to dress your tweezers; but the rewards for you effort are well worth it IMHO.

 

This is the video I used to begin to learn how to dress my tweezers ... his instructions and tips for dress are most excellent.

https://www.youtube.com/watch?v=injDQHraiLI

  • Like 1
Link to comment
Share on other sites

 I searched the web for a gold plated Dumont brass Nr. 4. It doesn't appear to be anymore available.

 

There is a company in Australia that appears to still sell these particular Dumont Tweezers. 

I know personally I want to grab a few pairs and store them away in case they discontinue them, because changing tweezers for me will be like changing my hands for someone else's.

 

I have emailed them for pricing.  So if anyone is interested in also buying a pair, please post below and I'll see if we can arrange a group buy and save some $$$.

Link to comment
Share on other sites

  • 1 month later...

Dumont number 3 for standard watch repairs. Can't remember the number for fine work but always Dumont. I would buy cheap tweezers from Southern Watch & Clock Suppliers (anyone remember them) I think they were in Orpington Kent when they had a sale on just for clock work. I would file the old ones down and use them for when I would be soldering or bluing screws.     

Link to comment
Share on other sites

Dumont number 3 for standard watch repairs. Can't remember the number for fine work but always Dumont. I would buy cheap tweezers from Southern Watch & Clock Suppliers (anyone remember them) I think they were in Orpington Kent when they had a sale on just for clock work. I would file the old ones down and use them for when I would be soldering or bluing screws.     

I think you mean number 5 . That is long and sharp . I love Vetus tweezers . Have Dumont but prefer the Vetus . Much more springiness in the Vetus . 

Link to comment
Share on other sites

  • 4 weeks later...

I just got a pair of Erem brass tweezers from Amazon for about $15 shipped. Them seem to be of decent quality. If I have time on the weekend I'll compare them to my Bergeon brass tweezers and post my impressions. It'd be nice to have something in between the almost useless India made tweezers I have and my $40+ Bergeon tweezers.

Link to comment
Share on other sites

I got to use my new Erem brass tweezers last night and so far, I'm impressed. They're a little lighter and finer tipped than my Bergeons and the tips are flat - less pointy. I'm not sure if that's an advantage or a disadvantage. The tips are well aligned out of the package, which is good since learning to dress tweezers is still on my to do list. They felt very secure, no parts pinged on me and I was easily able to manipulate tiny parts comfortably. I'm still prefer the Bergeon 2AM tweezers, maybe because I'm just used to them, but I think the Erem tweezers are very, very good for the money. I'll probably pick up another pair.

 

erem_bergeon01.JPG

 

Bergeon in the front, Erem in the back

 

erem_bergeon02.JPG

 

 

The rest of the photos are all Erem. You can see the beveled chisel type of point they have.

 

erem01.JPG

 

 

erem03.JPG

 

 

erem04.JPG

  • Like 2
Link to comment
Share on other sites

I bought a set of Vetus tweezers from Cousins because I wanted to try different sizes and shapes. All needed a lot of dressing and none feel as good to use as my one Dumont set. If I had to choose between the Vetus set and the one Dumont, I'd go with Dumont every time.

However, I'm liking the pics of the Erem above - nice review Don

S

  • Like 1
Link to comment
Share on other sites

  • 1 year later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Ok thanks Ross, I will give that a try!😁
    • Welcome my friend. 
    • Been there. Worn that Tshirt.  'ping'. Hands and knees. Nothing. Nada. 20 minutes? Ha! I found it 7 month later. How? Well, after advice from a member, I invested in a £4 UV light torch.  Hands and knees looking for a 'ping' from a Sekonda, found them both within 30 seconds. UV makes the jewel shine. easy peasy. Could have taken longer. Just lucky on the location of the search. Hope this helps.
    • Thanks Dell. I thought about silver soldering. Have never done it but would like to give it a go. Do you think to put flux on the butted joint then run the solder in or to maybe brace it with a piece of scrap spring steel?
    • Never and others. Yes, like you I do spend a fair amount of time reading the contents of this forum. I find it better that any other. Clear, lucid, no Prima Donas, and most of all an easy access without adverts. All thanks to Mark. God bless you mate. You give so much to many of us. What if? No Mark? Hypothetically. A forum. I did run a forum for a few years. Really enjoyed it, but became so engrossed that it did affect my health. I gave to to others to run. Not been back. It was very successful and rivalled a number of large paying sites. No adverts, no others but me. I did ask and listen to members comments and it worked well.    Costs Having a domain name, £10 annually.  Register the site with a forum company, free. Build the site using the forum company guide lines, free. It looked and ran almost the same a Mark's. All the same facilities. The cost was only £5 per month, but counted visits (views). If I recall, it was that price for 5,000 views. Each extra 5,000 views increased the price by £2 per month. Success was my own personal undoing. From £5 per month initially, it rose to £60 a month and looked like increasing. This was 10 years ago. I could not afford that, and asked it anyone would like to take over and someone did. I would assume that this is the price that Mark is funding for us all. His return is our continued comments on the internet about his course, and the fact that many of the big names on YouTube mention him as their Tutor. Those of us who have done, and are still using, his course, benefit. In comparison to other courses, I can't believe how cheap it is, and the value is exceptional. It is the structure that gives the value. Long may Mark reign. Ross  
×
×
  • Create New...