Jump to content

Do these hands (Hour & Minute) look misaligned to you guys?

SSTEEL

By SSTEEL
in Watch Repairs Help & Advice

 Share

Recommended Posts

rogart63 Distinguished Member

rogart63

Posted
Posted

Looks alright to me.  How does it look if you set the time at 6 a clock. Are they inline then?  Have experienced some slack in the hour wheel on some movements . Making the hand get in different positions if you turn the hands backwards or forwards. But never heard anyone complain about it. 

Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
  • Author
Posted

At six o'clock its bang on too.  Using the dial printing as a horizontal rule, with the hands set at six o'clock, I have four perfect right angles (45 degrees reference points).

Agree with the slack on some movements, this movement is an Asian 7750 and it does indeed have quite a bit of play.

Some people with these reps have far more unreal expectations of them than any of my genuine watch brand customers.

  • Like 3
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
1 hour ago, SSTEEL said:

At six o'clock its bang on too.  Using the dial printing as a horizontal rule, with the hands set at six o'clock, I have four perfect right angles (45 degrees reference points).

Agree with the slack on some movements, this movement is an Asian 7750 and it does indeed have quite a bit of play.

Some people with these reps have far more unreal expectations of them than any of my genuine watch brand customers.

Maybe he should go to a optician instead :) 

  • Like 1
Link to comment
Share on other sites
Ishima Super WRT Addict

Ishima

Posted
Posted

I've actually never had a customer complain about the precision of my hand setting, and that's not to suggest mine has always been perfect. In my experience customers are usually extremely ignorant of the hand setting accuracy, they bring watches in that are off a solid 15 minutes and don't notice until I tell them. Pretty typical you'd get someone so picky on a replica though. Tough situation. I second about the dial printing, I also think that many genuine watches of various brands dont print their dials in a way that allows the hands to show truly perfectly at every position. He surely expects too much.

  • Like 1
Link to comment
Share on other sites
omgiv WRT Addict

omgiv

Posted
Posted

I have to agree with everyone else.  They look good to me.  Panerai hands can be kind of tough because there aren't a lot of reference markers.  Add the fact that production accuracy (of the dial or movement) may not be a high priority and you have a perfect storm.

 

It may not be a good business practice, but If if were me and the customer is that picky I would send the watch back free of charge and not accept anymore work from them.  You just can't please some people and it sounds like you have bent over backwards trying to do so.

  • Like 3
Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
  • Author
Posted

I will have to let this customer go.  I so prefer to work on genuine brand watches as my day job, but you'd be surprised of some flaws I have found with these too, the latest, a Tutima, the inner chapter ring was misaligned.

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • GuyMontag
      Movement holder made with 3D printer

      By GuyMontag · Posted

      I missed this earlier. The dial isn't going into the holder, it should sit proud of it. This is what I am currently using which I print for each different movement.    
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      I didn't think pulling to set position would work harden the spring, in that position it is stressed where the arm starts. By work hardening i meant rapid polishing at that point, a bit like polishing a pivot work hardens as it compresses the steel. I doubt polishing by hand would achieve much in that respect though. Its finished, arm polished up mostly at the join to the bridge's main body. I'm ok with it, the screw holes aren't great as i had to open them up by redrilling and positioning it was difficult, I'm not much use with a loupe, opening up with a file might be a better option for me or i could just use the correct drill size 😅. And the detent is way too deep, i had to guess that with the stem release out of position and sat on top, but i only took one measure and went for it, no slowly slowly catch your monkey 😅. First go I'm happy , well sort of, it works and thats a big thing for me, next one will have a bit more finesse.  Anyone thats interested, after filing, i used a 2000 grade home made diamond  micro file and then 20 micron film, the film is much better than wet and dry, more stable to use and doesn't shed cheap grade grit everywhere , then auto polish on a sponge pad.
    • RichardHarris123
      Setting lever spring

      By RichardHarris123 · Posted

      I'm assuming that every time you set the watch you are work hardening the detent spring, maximum hardening is  where it meets the plate due to maximum deflection.   That's why it snaps there.  The Young's modulus may be the same but after it's reached its maximum yeid strength it breaks.  My mechanic engineering is very rusty, correct me if I'm wrong. 
    • Neverenoughwatches
      Setting lever spring

      By Neverenoughwatches · Posted

      Ah ok yes that makes sense to polish it where the arm starts to form from the body of the bridge, i thought you meant the underneath of all the arm.
    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      this is something I've never quite understood about the some of the Swiss companies. In 1957 Omega was using 9010 for the keyless parts with epilam. there's been a slow migration towards using heavier lubrication's but still typically oils and epilam to keep them in place. When it seems like 9504 works so much better.  
×
×
  • Create New...