Jump to content

Do these hands (Hour & Minute) look misaligned to you guys?

SSTEEL

By SSTEEL
in Watch Repairs Help & Advice

 Share

Recommended Posts

rogart63 Distinguished Member

rogart63

Posted
Posted

Looks alright to me.  How does it look if you set the time at 6 a clock. Are they inline then?  Have experienced some slack in the hour wheel on some movements . Making the hand get in different positions if you turn the hands backwards or forwards. But never heard anyone complain about it. 

Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
  • Author
Posted

At six o'clock its bang on too.  Using the dial printing as a horizontal rule, with the hands set at six o'clock, I have four perfect right angles (45 degrees reference points).

Agree with the slack on some movements, this movement is an Asian 7750 and it does indeed have quite a bit of play.

Some people with these reps have far more unreal expectations of them than any of my genuine watch brand customers.

  • Like 3
Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
1 hour ago, SSTEEL said:

At six o'clock its bang on too.  Using the dial printing as a horizontal rule, with the hands set at six o'clock, I have four perfect right angles (45 degrees reference points).

Agree with the slack on some movements, this movement is an Asian 7750 and it does indeed have quite a bit of play.

Some people with these reps have far more unreal expectations of them than any of my genuine watch brand customers.

Maybe he should go to a optician instead :) 

  • Like 1
Link to comment
Share on other sites
Ishima Super WRT Addict

Ishima

Posted
Posted

I've actually never had a customer complain about the precision of my hand setting, and that's not to suggest mine has always been perfect. In my experience customers are usually extremely ignorant of the hand setting accuracy, they bring watches in that are off a solid 15 minutes and don't notice until I tell them. Pretty typical you'd get someone so picky on a replica though. Tough situation. I second about the dial printing, I also think that many genuine watches of various brands dont print their dials in a way that allows the hands to show truly perfectly at every position. He surely expects too much.

  • Like 1
Link to comment
Share on other sites
omgiv WRT Addict

omgiv

Posted
Posted

I have to agree with everyone else.  They look good to me.  Panerai hands can be kind of tough because there aren't a lot of reference markers.  Add the fact that production accuracy (of the dial or movement) may not be a high priority and you have a perfect storm.

 

It may not be a good business practice, but If if were me and the customer is that picky I would send the watch back free of charge and not accept anymore work from them.  You just can't please some people and it sounds like you have bent over backwards trying to do so.

  • Like 3
Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
  • Author
Posted

I will have to let this customer go.  I so prefer to work on genuine brand watches as my day job, but you'd be surprised of some flaws I have found with these too, the latest, a Tutima, the inner chapter ring was misaligned.

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnR725
      Blew it with a coil

      By JohnR725 · Posted

      the problem with vintage watches and yes quartz watches can be vintage is availability of parts will be a problem. I have a link below where we can cross reference the coil and  I was hoping for more. Another problem for vintage parts are everyone on the group gets used to ordering from online. Conceivably the physical material houses that still exist out there might have the part and you'd have to reach out to them and see if anyone has one. this is because they don't list every single part that they have online with the exception of cousins where everything they do is online work just doesn't exist but the other material houses can have stuff not listed. Otherwise just set up a search on eBay and sooner or later it will possibly show up if you're lucky.   http://cgi.julesborel.com/cgi-bin/matcgi2?ref=SEK_6020A  
    • watchweasol
      Self introduction

      By watchweasol · Posted

      Hi welcome to the forum.    Enjoy
    • JohnR725
      Pocket watch escape wh

      By JohnR725 · Posted

      the bestfit book refers to Revue as wittnauer and the fingerprint we have this.
    • Waggy
      Difference between AS 1686 and ST 1686

      By Waggy · Posted

      Maybe a little off-topic, but it still amazes me that most people (and myself before I got into this hobby) don't realise that the movement of their watch was (in most cases) not made by the name on the dial of the watch. This is especially true of many 'fashion' watches which use the cheapest of cheap movements ($4 each) which are completely out of proportion to the overall cost of the watch ($++100s). Usually the actual manufacturer is stamped somewhere inconspicuous on the movement, usually around the balance, and this is what you need to find so you can locate spare parts or servicing manuals etc. This is like buying a top of the line Rolls Royce Phantom and learning it has a BMW engine..... oh wait a minute, it does! (6.75-liter, 460-horsepower BMW V12 engine - reference)
    • JohnR725
      1944 bulova a-11 trouble removing movement

      By JohnR725 · Posted

      I have an image of what the case is supposed to look like disassembled. then an interesting website https://www.mybulova.com/vintage-bulova-catalogs there's all sorts of interesting things here for anyone in watch repair. but for the particular subject these are the two I recommend. You can see page 7 is where I got the image of the case. Then the word apartment technical manual is really a training manual of watch repair covers wristwatches and pocket watches everybody should have a copy of this.  
×
×
  • Create New...