Jump to content

Guitar and watch repair


Recommended Posts

Not exactly combining the two but I did build a custom strat once - it was fun, but i ended up taking it to a pro in order to adjust the neck and frets, he did an amazing job.
IMG_0056.thumb.JPG.3e55f6069d0660f65a8dea82dd2886d8.JPG

Very nice piece. I have a Strat Plus with all the best hardware. I built a solid body Less Paul copy once and had an artist paint all my guitar hero's on it. I'll have to post it. Been playing rock and blues for 50 years; started at 8.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

I also combine the two been playing since i was about 12 but I,m now learing how to play again after my stroke last year it is smashing therapy tho gets your brain working again. luckily it was on the right side so my fingering hand wasnt affected but strumming sometimes is a pain but the pickings ok for lead breaks sort of lost the use of my wrist.

  • Like 3
Link to comment
Share on other sites

My Dad repaired watches for half a century and played lead guitar and mandolin on weekends for just as long.  He made both look easy... B)

My sisters and I sometimes helped him pack up his instruments after a gig.  One time, my sister put his Les Paul behind the car... he thought she'd put it in the trunk (boot) and he backed over it.  Yikes!!! :startle: 

He bought another guitar and gave the broken guitar to his friend, who rebuilt it and played it for years.  

By some miracle my sister is still alive. :unsure:

  • Like 3
Link to comment
Share on other sites

I took the stock pickups off my Epiphone Les Paul Standard II and replaced them with Gibson pickups. I am using the coils to rewind a quartz watch coil.  Does that count as mixing Guitar repair with watch repair?

Very very good mix in technology. However, you should have used phat cat pickups I on the Epiphany to get the bite. I do need to create a spring for an Elgin I am repairing and never thought of perhaps using an E string for the click spring; thoughts?


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

I am the one on the left. The guy on the right is my friend Jim. The guitar I am holding is a Rhyne acoustic steel string. I worked with Jay Rhyne from 1971 to 1977 building guitars and designing the machinery we used to make the guitar parts. Jay died a few years ago after a long illness and these guitars are quite rare.

 AgXPD78CAAEBzmr.jpg

david

  • Like 3
Link to comment
Share on other sites

I am the one on the left. The guy on the right is my friend Jim. The guitar I am holding is a Rhyne acoustic steel string. I worked with Jay Rhyne from 1971 to 1977 building guitars and designing the machinery we used to make the guitar parts. Jay died a few years ago after a long illness and these guitars are quite rare.
 AgXPD78CAAEBzmr.jpg
david

Sad for your friend. I too have made a few solid body guitars. However, i found that making guitars and producing takes away from playing....so now I play.b70d188399c0734ff9f208896118548c.jpg

Sent from my GT-N5110 using Tapatalk

  • Like 1
Link to comment
Share on other sites

Not exactly combining the two but I did build a custom strat once - it was fun, but i ended up taking it to a pro in order to adjust the neck and frets, he did an amazing job.
IMG_0056.thumb.JPG.3e55f6069d0660f65a8dea82dd2886d8.JPG

What is with the wires coming out of the jack?

Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites

My Dad repaired watches for half a century and played lead guitar and mandolin on weekends for just as long.  He made both look easy... B)
My sisters and I sometimes helped him pack up his instruments after a gig.  One time, my sister put his Les Paul behind the car... he thought she'd put it in the trunk (boot) and he backed over it.  Yikes!!! :startle: 
He bought another guitar and gave the broken guitar to his friend, who rebuilt it and played it for years.  
By some miracle my sister is still alive. :unsure:

You can check out some of my guitar on YouTube, here is the link.


Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites

8 hours ago, jdrichard said:

This is me playing Santana on my aluminum chromed guitar

 


Sent from my GT-N5110 using Tapatalk
 

 

Europa is one of my favorite songs on the whole planet... oh, and on Jupiter, too.  You do it justice... 

  • Like 1
Link to comment
Share on other sites

On 3/22/2017 at 0:55 PM, Sleeper said:

I took the stock pickups off my Epiphone Les Paul Standard II and replaced them with Gibson pickups. I am using the coils to rewind a quartz watch coil.  Does that count as mixing Guitar repair with watch repair?

:D

  • Like 1
Link to comment
Share on other sites

20 hours ago, jdrichard said:


Very very good mix in technology. However, you should have used phat cat pickups I on the Epiphany to get the bite. I do need to create a spring for an Elgin I am repairing and never thought of perhaps using an E string for the click spring; thoughts?


Sent from my iPhone using Tapatalk Pro

I was going for reliability over changing the sound. So the Stock USA made Gibson pickups seemed right.  Also I am a drummer but sometimes I have to work out cords so I have a guitars for that.  I wife is a flute player that plays only wooden native craftsman made flutes. So I play her backup sounds. So I have way more drums, cymbals, chimes, rattles, gongs and things that go pop and clack than anything with strings.

As far as using a E string for a spring, it has lots of nickel in it and so I bet it won't temper to spring hard.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • in general this shouldn't be any change. but in general questions like this it be nice to know the specifics of the watch in other words how was it performing before it was cased up and what is it doing now.
    • just as a reminder this watch is a Swatch group product. This will bring up a problem like spare parts and technical information. that I found some links to some information on when I talk about your watch and some of the technical and basically your watch is equivalent to 2834-2 for which I'm attaching the technical sheets. But equivalent does not mean exactly the same you want to do a search on the group for C07 as we discussed this watch before including the technical differences how it's supposed to be regulated and basically because it's watch group there is no parts availability. https://calibercorner.com/eta-caliber-c07-xxx/   https://www.chrono24.com/magazine/eta-movements-from-the-2824-2-to-the-powermatic-80-p_80840/ https://www.watchuseek.com/threads/h-10-movement-details.4636991/ eta CT_2834-2_FDE_481857_15.pdf
    • people be honest.... Swatch is evil for the watchmakers and repairers, BUT not everything in watches from Switzerland is from the Swatch-Group. As far as i know, Selitta got sacked by Swatch as a Movement-Assembler for them and they started to produce Movements in their own Name with slight Modifications. As far as i know, they sell Parts to the Market for their Movements. In most cases, if a ETA-Movement fails, it is a valid Option to replace it with a Selitta Movement, which i consider the Solution for this Mess with the Swatch-Group...... I have no Connection to anybody at Selitta, but being a Swiss-Guy, i still like to have Swiss-Made Watches, but not from the Swatch-Group.   ok ? regards, Ernst
    • Just one more greedy act by Swatch. They started a number of years ago here in the US..cutting off supplies to watchmakers that could build complications that many Swatch houses couldn't even touch. Old school masters who had gone through some of the most prestigious houses in the world. Otto Frei has some statements on their page about it. I tell all my customers to avoid new Swiss watches like the plague,..unless they just want an older one in their collection that still has some parts out on the market, or they have really deep pockets and don't mind waiting months and paying through the nose to get it back. Plenty of others to choose from..IE Seiko,..or other non-swiss brands Even a number of Chinese brands are catching up with the Swiss,..and I think that in time, their actions will be their downfall
    • Yes. If that's not what you are experiencing...start looking for something rubbing. A 1st guess is that one of the hands is rubbing against the hole in the center of the dial. Especially if you now have lower amplitude in face up/ face down positions.
×
×
  • Create New...