Jump to content

Guitar and watch repair

jdrichard
 Share

Recommended Posts

jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Not exactly combining the two but I did build a custom strat once - it was fun, but i ended up taking it to a pro in order to adjust the neck and frets, he did an amazing job.
IMG_0056.thumb.JPG.3e55f6069d0660f65a8dea82dd2886d8.JPG

Very nice piece. I have a Strat Plus with all the best hardware. I built a solid body Less Paul copy once and had an artist paint all my guitar hero's on it. I'll have to post it. Been playing rock and blues for 50 years; started at 8.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
Cad101 Super WRT Addict

Cad101

Posted
Posted

I also combine the two been playing since i was about 12 but I,m now learing how to play again after my stroke last year it is smashing therapy tho gets your brain working again. luckily it was on the right side so my fingering hand wasnt affected but strumming sometimes is a pain but the pickings ok for lead breaks sort of lost the use of my wrist.

  • Like 3
Link to comment
Share on other sites
sperki77 WRT Addict

sperki77

Posted
Posted

My Dad repaired watches for half a century and played lead guitar and mandolin on weekends for just as long.  He made both look easy... B)

My sisters and I sometimes helped him pack up his instruments after a gig.  One time, my sister put his Les Paul behind the car... he thought she'd put it in the trunk (boot) and he backed over it.  Yikes!!! :startle: 

He bought another guitar and gave the broken guitar to his friend, who rebuilt it and played it for years.  

By some miracle my sister is still alive. :unsure:

  • Like 3
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
I took the stock pickups off my Epiphone Les Paul Standard II and replaced them with Gibson pickups. I am using the coils to rewind a quartz watch coil.  Does that count as mixing Guitar repair with watch repair?

Very very good mix in technology. However, you should have used phat cat pickups I on the Epiphany to get the bite. I do need to create a spring for an Elgin I am repairing and never thought of perhaps using an E string for the click spring; thoughts?


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
david WRT Addict

david

Posted
Posted

I am the one on the left. The guy on the right is my friend Jim. The guitar I am holding is a Rhyne acoustic steel string. I worked with Jay Rhyne from 1971 to 1977 building guitars and designing the machinery we used to make the guitar parts. Jay died a few years ago after a long illness and these guitars are quite rare.

 AgXPD78CAAEBzmr.jpg

david

  • Like 3
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
I am the one on the left. The guy on the right is my friend Jim. The guitar I am holding is a Rhyne acoustic steel string. I worked with Jay Rhyne from 1971 to 1977 building guitars and designing the machinery we used to make the guitar parts. Jay died a few years ago after a long illness and these guitars are quite rare.
 AgXPD78CAAEBzmr.jpg
david

Sad for your friend. I too have made a few solid body guitars. However, i found that making guitars and producing takes away from playing....so now I play.b70d188399c0734ff9f208896118548c.jpg

Sent from my GT-N5110 using Tapatalk

  • Like 1
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Not exactly combining the two but I did build a custom strat once - it was fun, but i ended up taking it to a pro in order to adjust the neck and frets, he did an amazing job.
IMG_0056.thumb.JPG.3e55f6069d0660f65a8dea82dd2886d8.JPG

What is with the wires coming out of the jack?

Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
My Dad repaired watches for half a century and played lead guitar and mandolin on weekends for just as long.  He made both look easy... B)
My sisters and I sometimes helped him pack up his instruments after a gig.  One time, my sister put his Les Paul behind the car... he thought she'd put it in the trunk (boot) and he backed over it.  Yikes!!! :startle: 
He bought another guitar and gave the broken guitar to his friend, who rebuilt it and played it for years.  
By some miracle my sister is still alive. :unsure:

You can check out some of my guitar on YouTube, here is the link.


Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites
sperki77 WRT Addict

sperki77

Posted
Posted
8 hours ago, jdrichard said:

This is me playing Santana on my aluminum chromed guitar

 


Sent from my GT-N5110 using Tapatalk
 

 

Europa is one of my favorite songs on the whole planet... oh, and on Jupiter, too.  You do it justice... 

  • Like 1
Link to comment
Share on other sites
sperki77 WRT Addict

sperki77

Posted
Posted
On 3/22/2017 at 0:55 PM, Sleeper said:

I took the stock pickups off my Epiphone Les Paul Standard II and replaced them with Gibson pickups. I am using the coils to rewind a quartz watch coil.  Does that count as mixing Guitar repair with watch repair?

:D

  • Like 1
Link to comment
Share on other sites
Sleeper Member

Sleeper

Posted
Posted
20 hours ago, jdrichard said:


Very very good mix in technology. However, you should have used phat cat pickups I on the Epiphany to get the bite. I do need to create a spring for an Elgin I am repairing and never thought of perhaps using an E string for the click spring; thoughts?


Sent from my iPhone using Tapatalk Pro

I was going for reliability over changing the sound. So the Stock USA made Gibson pickups seemed right.  Also I am a drummer but sometimes I have to work out cords so I have a guitars for that.  I wife is a flute player that plays only wooden native craftsman made flutes. So I play her backup sounds. So I have way more drums, cymbals, chimes, rattles, gongs and things that go pop and clack than anything with strings.

As far as using a E string for a spring, it has lots of nickel in it and so I bet it won't temper to spring hard.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • ManSkirtBrew
      1972 Bulova President "E" Sea King 11ACACB movement

      By ManSkirtBrew · Posted

      Unfortunately I'm not that lucky. I started on the train side and after I noticed the binding I pulled everything out except the driving wheel to rule everything else out. It still binds. I'm going to double check that the pinion is fully seated on the staff first, then if no joy I'll push the bridge jewel up a fraction of a mm. Fingers crossed!
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Happy to have helped, great way to start the day with a win! 🥳
    • doober
      Rado rotor removal

      By doober · Posted

      Thank you for the advise!! It worked. The setting screw was a lock/unlock to remove the rotor. 
    • GuyMontag
      1972 Bulova President "E" Sea King 11ACACB movement

      By GuyMontag · Posted

      I have that French tech sheet too, it is a little different than the English one (eg, it doesn't have the auto works diagram). BTW, it looks like you are looking up the case number in the 1979 ABC supplement. The 1974 ABC catalog does have the 3093 case. As you determined it takes the 1222-5 crystal.  When I serviced my President 'A' (which also takes that crystal), I was able to fit a 29.8 crystal from my DPA crystal assortment. Those are, in my opinion, a great deal. The assortment comes with 10 sizes each from 27.8mm to 32.4mm in 0.2 increments. I pretty much use them for any non-armored crystal that takes a high dome crystal. I think they no longer make them but Cousins has still has some in stock but when I bought them they were around $40 for the set and now they are around $100. Still, at 40 cents a crystal it's still a good deal. For the large driving wheel, I remember I once assembled the keyless/motion works first and when I placed the large driving wheel it was interfering with the setting wheel on the dial side as the teeth were not fully meshing and it wouldn't fully seat. If that isn't the issue I got nothing and am looking forward to see how you solve it 🙂
    • Waggy
      Rado rotor removal

      By Waggy · Posted

      Not sure, but just looking at it, it seems like the screw on the right may be a fake? The one on the left may not be a screw in the regular sense at all, rather a 2 position device, I think you need to point the slot towards either of the 2 dots and one will secure and one will open. Like I said this is just my best guess looking at the pictures.
×
×
  • Create New...