Jump to content

Guitar and watch repair


Recommended Posts

Not exactly combining the two but I did build a custom strat once - it was fun, but i ended up taking it to a pro in order to adjust the neck and frets, he did an amazing job.
IMG_0056.thumb.JPG.3e55f6069d0660f65a8dea82dd2886d8.JPG

Very nice piece. I have a Strat Plus with all the best hardware. I built a solid body Less Paul copy once and had an artist paint all my guitar hero's on it. I'll have to post it. Been playing rock and blues for 50 years; started at 8.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

I also combine the two been playing since i was about 12 but I,m now learing how to play again after my stroke last year it is smashing therapy tho gets your brain working again. luckily it was on the right side so my fingering hand wasnt affected but strumming sometimes is a pain but the pickings ok for lead breaks sort of lost the use of my wrist.

  • Like 3
Link to comment
Share on other sites

My Dad repaired watches for half a century and played lead guitar and mandolin on weekends for just as long.  He made both look easy... B)

My sisters and I sometimes helped him pack up his instruments after a gig.  One time, my sister put his Les Paul behind the car... he thought she'd put it in the trunk (boot) and he backed over it.  Yikes!!! :startle: 

He bought another guitar and gave the broken guitar to his friend, who rebuilt it and played it for years.  

By some miracle my sister is still alive. :unsure:

  • Like 3
Link to comment
Share on other sites

I took the stock pickups off my Epiphone Les Paul Standard II and replaced them with Gibson pickups. I am using the coils to rewind a quartz watch coil.  Does that count as mixing Guitar repair with watch repair?

Very very good mix in technology. However, you should have used phat cat pickups I on the Epiphany to get the bite. I do need to create a spring for an Elgin I am repairing and never thought of perhaps using an E string for the click spring; thoughts?


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

I am the one on the left. The guy on the right is my friend Jim. The guitar I am holding is a Rhyne acoustic steel string. I worked with Jay Rhyne from 1971 to 1977 building guitars and designing the machinery we used to make the guitar parts. Jay died a few years ago after a long illness and these guitars are quite rare.

 AgXPD78CAAEBzmr.jpg

david

  • Like 3
Link to comment
Share on other sites

I am the one on the left. The guy on the right is my friend Jim. The guitar I am holding is a Rhyne acoustic steel string. I worked with Jay Rhyne from 1971 to 1977 building guitars and designing the machinery we used to make the guitar parts. Jay died a few years ago after a long illness and these guitars are quite rare.
 AgXPD78CAAEBzmr.jpg
david

Sad for your friend. I too have made a few solid body guitars. However, i found that making guitars and producing takes away from playing....so now I play.b70d188399c0734ff9f208896118548c.jpg

Sent from my GT-N5110 using Tapatalk

  • Like 1
Link to comment
Share on other sites

Not exactly combining the two but I did build a custom strat once - it was fun, but i ended up taking it to a pro in order to adjust the neck and frets, he did an amazing job.
IMG_0056.thumb.JPG.3e55f6069d0660f65a8dea82dd2886d8.JPG

What is with the wires coming out of the jack?

Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites

My Dad repaired watches for half a century and played lead guitar and mandolin on weekends for just as long.  He made both look easy... B)
My sisters and I sometimes helped him pack up his instruments after a gig.  One time, my sister put his Les Paul behind the car... he thought she'd put it in the trunk (boot) and he backed over it.  Yikes!!! :startle: 
He bought another guitar and gave the broken guitar to his friend, who rebuilt it and played it for years.  
By some miracle my sister is still alive. :unsure:

You can check out some of my guitar on YouTube, here is the link.


Sent from my GT-N5110 using Tapatalk

Link to comment
Share on other sites

8 hours ago, jdrichard said:

This is me playing Santana on my aluminum chromed guitar

 


Sent from my GT-N5110 using Tapatalk
 

 

Europa is one of my favorite songs on the whole planet... oh, and on Jupiter, too.  You do it justice... 

  • Like 1
Link to comment
Share on other sites

On 3/22/2017 at 0:55 PM, Sleeper said:

I took the stock pickups off my Epiphone Les Paul Standard II and replaced them with Gibson pickups. I am using the coils to rewind a quartz watch coil.  Does that count as mixing Guitar repair with watch repair?

:D

  • Like 1
Link to comment
Share on other sites

20 hours ago, jdrichard said:


Very very good mix in technology. However, you should have used phat cat pickups I on the Epiphany to get the bite. I do need to create a spring for an Elgin I am repairing and never thought of perhaps using an E string for the click spring; thoughts?


Sent from my iPhone using Tapatalk Pro

I was going for reliability over changing the sound. So the Stock USA made Gibson pickups seemed right.  Also I am a drummer but sometimes I have to work out cords so I have a guitars for that.  I wife is a flute player that plays only wooden native craftsman made flutes. So I play her backup sounds. So I have way more drums, cymbals, chimes, rattles, gongs and things that go pop and clack than anything with strings.

As far as using a E string for a spring, it has lots of nickel in it and so I bet it won't temper to spring hard.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Getting back to the issue which is us guys repairing or just enjoying horological exploits. The big worry now is how sound is Cousins as company going forward. The of cost if this 8 year legal battle will be astronomical. Cut backs will happen noticed already how the Cousins catalogue is half its size this year. The main supplier going out of business will hit the UK horological community in a big way.    On the Brexit issue it was about a sovereign country being able to make its own laws and trade with any country in the world. I cannot see what was wrong with this. For those who wish to re join the cost would be very high indeed.
    • Yes, it's the same (old) song and it's getting worse & worse;  
    • 🤔 leaving the EU meant that UK was no longer part of the convention and have already been turned down an independent reapplication. I'm pretty sure courts have to be held in Switzerland in this case. There will be a lot more watches stashed away in draws  tbh, folk wont be able to afford to maintain them. Cheap watches will be bought and top end watches by folk with plenty of cash that can pay for service and repair. The expensive once in a lifetime gifts and everything else inbetween will be at the forgotton when they stop working. I know i was being a numpty, get used to it 😄 Anybody that knows will boycott them, but besides repairers who will know. Nope will never buy one, i made that decision as soon as i learnt about this. 
    • although not in this case.  It was the Lugano Convention and its deficiencies that allowed a Swiss court decision in the first place.  This isnt really a Brexit issue at all.  A decision that affects both the EU and the UK should never have been heard in Switzerland. I bet the authorised service centres in the UK are pretty pleased.  It's a massive shame, though; I believe watch owners should be able to choose to have their watch serviced by whoever they trust.
    • Hi guys I think that old hippy is correct, it opens the gates for china to manufacture aftermarket spare parts. considering that they already do work on behalf of the Swiss I guess this decision gives the a little more legitimacy to tool up and I am sure they will take advantage of the situation either with or without the blessing of the Swiss watch industry  Having read about the protectionist machinations of the Swiss in the history of Europe they were the only ones to get fat at everybody else’s expense. I think the outcome could have been guessed at but ,  fair play to Cousins UK for standing up to them.  Now the question,  will everybody boycott Swiss watches and Swatch, no way they will still fill their coffers.  Me I stick with the Japanese once renowned for cheap shitty watches who came good through industrial effort and don’t for get the Russians that most dismiss as low grade crap. Wouldn’t buy a swatch product ever how about you all.? a
×
×
  • Create New...