Jump to content

Timex Stem & Crown


Recommended Posts

Hi All 

Not long ago I was given and old Timex that belonged to my grandfather. It came to me as pictured and I haven't had the time to look at it since, I know very little about Timex watches and I am not even sure what model or what year it was manufactured in. Its missing its stem/crown, so I would like to identifying a suitable replacement. 

I would be very grateful if anyone could shed some light on this watch or even point me in the right direction so that I can find out if the old thing will still tick over and hopefully put it back into daily use.  

Many Thanks in Advance 

DSC_1689.thumb.JPG.99943fa71650d7ddeb2b2c254534a6e0.JPG58cd3a257c059_DSC_1686(2).thumb.JPG.0bbf4fb4b938367b6dac05539b0f3d31.JPG

Link to comment
Share on other sites

I have looked at this watch several times today and completely missed the numbers below the 6 o'clock marker. Only after looking at it through the eyeglass did I have the 'aghhh' moment. :unsure: Obviously not looking close enough. 

The numbers read 26761 2573 

 

Link to comment
Share on other sites

The first 5 digits relate to the model number, the next 2 the movement and the last 2 the date of manufacture (1973).

The movements were not intended to be serviced and parts are virtually unobtainable, but if you'd asked last week, you could have bougt this for it http://www.ebay.co.uk/itm/NOS-TIMEX-Replacement-Watch-Movement-M-25-In-Original-Container-/381990989165?hash=item58f06fed6d:g:HMcAAOSwopRYkkwH

If you want to get it going then I suggest either looking out for a donor with a stem, or fitting a Chinese movement.

Link to comment
Share on other sites

Stuart Baker is correct, the catalog number is 26761, It's a Marlin (water resistant) calendar model. A #25 hand wind movement, and the year is 1973. 

It uses a one piece crown and stem, I'll check and see which one when I get home this evening. It might be available, it's possible that I even have it myself.

Cheers!

  • Like 1
Link to comment
Share on other sites

Thanks David, Vinn and Stuart 

I now have the model, date and a service manual for the movement. 

Just need to source the Stem/crown and get it serviced, something I might attempt myself as I need to start somewhere....

Cheers for the quick responses !

Link to comment
Share on other sites

I think I've located the crown & stem that you need. Since yours is a UK model, I don't have an exact reference, but I believe that I have found its American cousin, 26760. As far as I can tell the cases are the same. 

The Timex part number is 025-060054

The crown and stem can be found in the material system 401/1 TX1K, listed as compartment 10.

I've attached some pictures, and if you want it just send me a PM and I'll mail one off to you. 

DSCF1619.JPG

DSCF1620.JPG

DSCF1621.JPG

  • Like 3
Link to comment
Share on other sites

The Crown and Stem turned up today, Many Thanks David, very much appreciated.

Like a child I took the part out and matched it up.

It fitted perfectly. However, It would would not stay in place.. after taking the cover plate off and looking through the loupe I spotted why I believe it was missing its crown and stem in the first place, and perhaps something I should have noticed before (rookie)

The Set Lever (pn:443) has been damaged and no longer retains the stem at all. 

So, I am looking for the part, once again.

On a positive note the watch is ticking over and keeping good time :-) #

DSC_1702.thumb.JPG.2b9a08a59288a5699e439b775a105f93.JPG

Link to comment
Share on other sites

Yes, I removed the damaged set lever and then replaced the screw until such times as I can source the part. Only option I have so far is a donor movement on the 'Bay', and I am currently waiting for it too run its course.  

Link to comment
Share on other sites

  • 1 year later...
On 3/21/2017 at 3:22 PM, dadistic said:

The crown and stem are on their way, I posted them Monday afternoon.  Let me know when they show up.

Have Fun!

Hi,

I was wondering if you had a stem and crown for a 1964 Marlin (gold case) model 20242464? Or know how i can get one. If they are 2 pieces, my watch has the stem but the crown is broken.

Thank you!

Link to comment
Share on other sites

21 hours ago, wadsbrau said:

Hi,

I was wondering if you had a stem and crown for a 1964 Marlin (gold case) model 20242464? Or know how i can get one. If they are 2 pieces, my watch has the stem but the crown is broken.

Thank you!

 I have it - 20242464 It is not a two piece split stem.  The case is a front loader-

 

Link to comment
Share on other sites

49 minutes ago, JerseyMo said:

 I have it - 20242464 It is not a two piece split stem.  The case is a front loader-

 

I meant 2 pieces as in seperate crown that screws onto the stem. But, Any idea how i could get one?.

thanks

Link to comment
Share on other sites

  • 1 year later...
On 3/18/2017 at 4:43 PM, dadistic said:

I think I've located the crown & stem that you need. Since yours is a UK model, I don't have an exact reference, but I believe that I have found its American cousin, 26760. As far as I can tell the cases are the same. 

The Timex part number is 025-060054

The crown and stem can be found in the material system 401/1 TX1K, listed as compartment 10.

I've attached some pictures, and if you want it just send me a PM and I'll mail one off to you. 

DSCF1619.JPG

DSCF1620.JPG

DSCF1621.JPG

I have a mid to late 60's Marlin of my own and am in need of the single piece crown and stem to get it running properly again. Is there a site you recommend for trying to find them? Does't necessarily have to be OEM. Thanks in advance. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi all Thought I'd show my small and trying to keep under control watch collection! Apart from the Enicar all were under £12! At least if I destroy them in the process then I won't be too worse off. A few pics to start off with First of all my first attempt. A Thuya pocket watch. It was only running face down and would stop when vertical. So now it still works face down and only slows down when vertical so at least an improvement! 😄  I only have a generic watch oil at the mo so that won't help but I'm hoping to get some more appropriate oils in a couple of months for my birthday. I did have to get a crystal for it since it didn't come with one. It didn't look as though it would friction fit (and I don't have a crystal press in any case) so I glued it to the case with PVA. So far so good. Next up above are a sekonda and citizen automatic. Both non runners. Both with broken balance wheels amongst other things. I'm hopeful the citizen will start when I get the new one I ordered but the sekonda is being kept for spares and trial of new techniques. And finally the Enicar and the timemaster. Both running when I got them. I wanted to get running watches so that at least I stood a fighting chance of still having a running watch after the service! It was all going well on the Enicar until I dropped the balance wheel during reassembly...😔. Unfortunately they are quite expensive to get so for now I'll won't do anything with it but I would like to fix it at one point. The timemaster is still running (yeah!) but I managed to break a dial foot during the deassembly. First repair attempt failed so now I am looking at soldering it back on... So there we go. My initial foray into this great hobby. Thanks for sticking with this tale so far.  I'm hoping that once the balance wheel arrives for the citizen I will be able to say I bought a non runner and fixed it! So fingers crossed. Thanks for looking, Nick
    • Like losing Ranfft. That was a wake up call. We took his website for granted. Miss him terribly.  
    • Its 4 o'clock in the morning here in the Uk, i cant sleep, i dont sleep, not much ever really. My brain never shuts off to rest, I'm just a constant thinker, i have to be very tired to be able to sleep,  i guess eventually it will be my undoing and my health will suffer because of it I'm sure. But while I'm here i want to get as much out of life as i can, and give as much as i can, to help,maybe to make a difference to someone's life if that is within my capability,recent events have made that need even more clear to me. I'm not sure where I'm going with this or why i bring it up , or if its relevant to want i want to talk about its just in my head right now. What i do want to talk about is something thats been on my mind for ages. I like to be prepared,  I'm not fond of surprises because surprises take control away and i am a bit of a control freak at times. This forum, Our Forum if i can call it that, is here because of two reasons. The guy that created it and keeps it funded and the people that joined it.  Without either, it would not exist, and lets face it one day it won't ( I'm a realist and i talk about things others dont or who are afraid to in other words folk that dont particularly prepare for the inevitable). How many of us visit here regularly ?  How many among us almost depend on the forum as a way of socialising because they are stuck at home and how many of us has it become part of a daily routine to check in and see if they can offer advice or get help with something they are working on or just to have a chat and engage in some banter. The members here are in the thousands and thousands have disappeared over the years many had just a fleeting visit. But there are a good few of us that know each other quite well and visit regularly. I dont know about you but i wouldnt want to lose that communication with you all, in all honesty it has become an important part of that side of my life and helps to feed my passion for all things watches. Some of you may think differently and thats ok, some of may stop and think # what would i do " Without Our Forum " # 
    • Naptha appears to be a general name and its content can be varied depending upon what it's specific use is. Lighter fluid as an example can be light or heavier also with other ingredients to help it burn. Try sesrching for benzine ( as opposed to benzene which is linked to causing health issues ) . There are other fluids such as ethanol that you could try and also methylated sprirts, mostly ethanol with a small percentage of methanol added. Experiment with any new chemical to see how quickly schellac dissolves in its presence. I have tried a few things but hexane is not one of them, i understand it does evaporate very quickly.  Be sure sure to check out any safety data on chemicals you try. Toxicity of fumes and flash point information, ultrasonic machines can heat up fluids even without a heater function. And of course always ask here for personal opinions when trying a new substance. 
    • I have that set and really like it. I prefer that crystal holder over the one that came with my Bergeon claw tool and any time I use the claw I use this one instead of the Bergeon one, just an additional bonus with this tool.
×
×
  • Create New...